基本情報

学部兼担

• 工学部

全学メールアドレス

• 全学メールアドレス

  tsuji.nobuhiro.5akyoto-u.ac.jp

所属学協会

• 自 1994年05月, 至 現在

  日本塑性加工学会
• 熱処理技術協会
• 溶接学会
• TMS (Minerals, Metals and Materials Society)
• 軽金属学会
• 日本鉄鋼協会
• 日本金属学会
• ASM
• MRS (Materials Research Society)

学位

• 工学修士(京都大学)
• 博士（工学）(京都大学)

出身大学院・研究科等

• 京都大学, 大学院工学研究科博士後期課程金属加工学専攻, Dept. of Metal Science and Technology, 修了
• 京都大学, 大学院工学研究科修士課程金属加工学専攻, Dept. of Metal Science and Technology, 修了

出身学校・専攻等

• 京都大学, 工学部金属加工学科, Department of Metal Science and Technology, 卒業

出身高等学校

• 出身高等学校

  京都府立洛水高等学校, らくすいこうとうがっこう

経歴

• 自 2024年10月, 至 2025年03月

  大阪大学, 大学院工学研究科 マテリアル生産科学専攻, 非常勤講師
• 自 2023年04月, 至 2026年03月

  インド工科大学 ハイデラバード校, Distinguished Professor
• 自 2023年06月, 至 2023年09月

  東京工業大学, 物質理工学院, 非常勤講師
• 自 2009年03月, 至 現在

  京都大学, 大学院工学研究科 材料工学専攻, 教授
• 自 2015年10月, 至 2019年03月

  九州大学, 巨大ひずみマテリアル国際研究センター, 客員教授
• 自 2015年04月, 至 2016年03月

  大阪大学, 接合科学研究所, 招聘教授
• 自 2011年04月, 至 2011年09月

  東北大学, 金属材料研究所, 招聘教授
• 自 2007年04月, 至 2009年02月

  大阪大学, 大学院工学研究科 知能・機能創成工学専攻, 准教授
• 自 2000年04月, 至 2007年03月

  大阪大学, 大学院工学研究科 知能・機能創成工学専攻, 助教授
• 自 2007年

  岐阜大学大学院工学研究科 非常勤講師, Graduate School of Engineering
• 自 2004年, 至 2005年

  豊橋技術科学大学大学院工学研究科 非常勤講師, Graduate School of Engineering
• 自 2001年

  東京工業大学大学院総合理工学研究科 非常勤講師, Interdisciplinary Graduate School of Science and Engineering
• 自 1994年04月, 至 2000年03月

  大阪大学, 工学部 材料物性工学科（のち 大学院工学研究科 マテリアル科学専攻）, 助手
• 自 1998年07月, 至 1999年07月

  コロラド鉱山大学, 冶金・材料工学専攻, Visiting Scholar（日本学術振興会海外特別研究員）
• 自 1993年04月, 至 1994年03月

  京都大学, 大学院工学研究科 金属加工学専攻, 日本学術振興会 特別研究員

使用言語

• 英語
• 日本語

ID,URL

• ORCID ID

  0000-0002-2132-1327

• J-Global ID

  200901087156571632

• Researcher ID

  F-7951-2010

• 外部リンク

  http://www.tsujilab.mtl.kyoto-u.ac.jp/

関連Webサイト

• https://exaly.com/author/3416382/nobuhiro-tsuji/rankings
• http://www.tsujilab.mtl.kyoto-u.ac.jp/
• https://publons.com/researcher/2826149/nobuhiro-tsuji/
• https://www.scopus.com/authid/detail.uri?origin=AuthorEval&authorId=7101687859
• https://scholar.google.co.jp/citations?user=-PW58WoAAAAJ&hl=en

researchmap URL

• https://researchmap.jp/read0185249

研究

研究テーマ・研究概要

• 研究テーマ

  バルクナノメタルの研究；構造用金属材料のナノ・ミクロ組織と力学特性；加工熱処理による金属材料のナノ・ミクロ組織制御

• 研究概要

  Nobuhiro Tsuji's research interests include: 1) correlation between nano/micro-structures and mechanical properties (strength, ductility, toughness and fracture) of structural materials (steels, Al alloys, Cu alloys, Ti alloys, Mg alloys, etc.); 2) fundamental mechanisms of deformation, recrystallization, phase transformation and precipitation during thermomechanical processing of metals; and 3) fabrication and properties of bulk nanostructured metals. Especially his works on bulk nanostructured metals (ultrafine grained metallic materials) have been well evaluated.

研究キーワード

• 材料強度学
• 金属組織学
• 鉄鋼材料学
• 機械冶金学
• 先進構造材料
• 物理冶金学

研究分野

• ナノテク・材料, 構造材料、機能材料
• ナノテク・材料, 材料加工、組織制御
• ナノテク・材料, 金属材料物性

論文

• Mechanistic origin of grain size and oxygen interstitial effects on strain-induced α^" martensitic transformation in Ti-12Mo alloy

  Yan Chong; Tomohito Tsuru; Masatoshi Mitsuhara; Baoqi Guo; Reza Gholizadeh; Koji Inoue; Andrew Godfrey; Nobuhiro Tsuji

  COMMUNICATIONS MATERIALS, 2025年03月20日

  
• Electroplating of Wear‐ and Corrosion‐Resistant CrCoNi Medium‐Entropy Alloys beyond Hard Chromium Coatings

  Yuki Murakami; Shuhei Yoshida; Kosuke Ishii; Naoya Nishi; Akiyuki Ryoki; Nobuhiro Tsuji; Kuniaki Murase; Kazuhiro Fukami

  Advanced Functional Materials, 2025年01月19日

  
• Making stress visible: A method to quantify local stress distribution in metals using digital image correlation method

  MH Park; S Yako; Y Takeda; A Shibata; N Tsuji

  SCRIPTA MATERIALIA, 2024年11月, 査読有り

  
• Phase decomposition behavior and its impact on mechanical properties in bulk nanostructured Cu-20 at.%Fe supersaturated solid solution

  MW Liu; RX Zheng; HX Li; QM Wei; CL Ma; N Tsuji

  JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2024年06月, 査読有り

  
• Effect of Bain Unit Size on Low-temperature Fracture Toughness in Medium-carbon Martensitic and Bainitic Steels

  A Shibata; T Katsuno; M Tsuboi; N Tsuji

  ISIJ INTERNATIONAL, 2024年, 査読有り

  
• Grain size dependent deformation microstructure evolution and work-hardening in CoCrNi medium entropy alloy

  Shuhei Yoshida; Genki Yamashita; Takuto Ikeuchi; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji

  Journal of Alloys and Metallurgical Systems, 2024年11月

  この論文にアクセスする：

  
• Characteristic deformation microstructure evolution and deformation mechanisms in face-centered cubic high/medium entropy alloys

  Shuhei Yoshida; Rui Fu; Wu Gong; Takuto Ikeuchi; Yu Bai; Zongqiang Feng; Guilin Wu; Akinobu Shibata; Niels Hansen; Xiaoxu Huang; Nobuhiro Tsuji

  Acta Materialia, 2024年10月

  
• Real-time Observation of Stress-strain Behavior beyond Necking in Martensitic Steel by <i>in-situ</i> Synchrotron X-ray Diffraction

  Avala Lavakumar; Sukyoung Hwang; Kazuho Okada; Myeong-heom Park; Atul Haris Chokshi; Nobuhiro Tsuji

  ISIJ International, 2024年10月15日

  この論文にアクセスする：

  
• Martensitic transformation-governed Lüders deformation enables large ductility and late-stage strain hardening in ultrafine-grained austenitic stainless steel at low temperatures

  Wenqi Mao; Si Gao; Wu Gong; Takuro Kawasaki; Tatsuya Ito; Stefanus Harjo; Nobuhiro Tsuji

  Acta Materialia, 2024年10月01日

  
• Effect of carbon segregation at prior austenite grain boundary on hydrogen-related crack propagation behavior in 3Mn-0.2C martensitic steels

  Kazuho Okada; Akinobu Shibata; Yuuji Kimura; Masatake Yamaguchi; Ken-ichi Ebihara; Nobuhiro Tsuji

  Acta Materialia, 2024年11月

  
• Origin of Serrated Markings on the Hydrogen Related Quasi-cleavage Fracture in Low-carbon Steel with Ferrite Microstructure

  Kazuho Okada; Akinobu Shibata; Hisashi Matsumiya; Nobuhiro Tsuji

  Tetsu-to-Hagane, 2024年09月01日

  
• Strain localization behavior in a polycrystalline magnesium alloy with de-twinning

  Jongbin Go; Myeong-heom Park; Si Gao; Nobuhiro Tsuji

  Scripta Materialia, 2024年09月

  
• Effect of Deformation and Subsequent Heat Treatment on Sigma-Phase Precipitation and Mechanical Property of CoCrFeMnNi High Entropy Alloy

  Tetsuya Yamashita; Reza Gholizadeh; Shuhei Yoshida; Nobuhiro Tsuji

  MATERIALS TRANSACTIONS, 2024年

  
• Characteristic dislocation slip behavior in polycrystalline HfNbTiZr refractory medium entropy alloy

  Qian He; Shuhei Yoshida; Shinji Okajo; Masaki Tanaka; Nobuhiro Tsuji

  Journal of Materials Science & Technology, 2025年03月

  
• Exploring unusual Lüders deformation in ultrafine-grained high-Mn austenitic steel

  Sukyoung Hwang; Hirokazu Kato; Kazuho Okada; Myeong-heom Park; Avala Lavakumar; Reza Gholizadeh; Hiroki Adachi; Masugu Sato; Nobuhiro Tsuji

  Materials Research Letters, 2024年06月02日

  
• Direct observations of dynamic and reverse transformation of Ti-6Al-4V alloy and pure titanium

  BQ Guo; HC Chen; Y Chong; WQ Mao; S Harjo; W Gong; ZW Zhang; JJ Jonas; N Tsuji

  ACTA MATERIALIA, 2024年04月, 査読有り

  
• Mechanism of DSA effect correlating to the macroscopic PLC banding in high-Mn austenitic steel

  Sukyoung Hwang; Myeong-Heom Park; Yu Bai; Avala Lavakumar; Akinobu Shibata; Hiroki Adachi; Masugu Sato; Nobuhiro Tsuji

  Scripta Materialia, 2024年08月

  
• Mechanism of simultaneous increase of strength and ductility with grain refinement in Si-added high-Mn austenitic steel

  S Hwang; Y Bai; S Gao; MH Park; A Shibata; N Tsuji

  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024年03月, 査読有り

  
• The Effect of Serration Behavior on Strain Hardening and Deformation in 22Mn-0.6C Steel

  Sukyoung Hwang; Park Myeong-Heom; Yu Bai; Akinobu Shibata; Hiroki Adachi; Masugu Sato; Nobuhiro Tsuji

  International Symposium on New Developments in Advanced High-Strength Sheet Steels, AHSS 2023, 2023年

  
• Superior strength-ductility combination resulted from hetero-zone boundary affected region in Cu-Fe layered material

  H Ran; PH Ye; FJ Guo; MS Wang; WL Su; X Chen; S Gao; N Tsuji; YT Zhu; XC Lu; CX Huang

  JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2024年05月, 査読有り

  
• In situ neutron diffraction revealing the achievement of excellent combination of strength and ductility in metastable austenitic steel by grain refinement

  WQ Mao; W Gong; S Harjo; S Morooka; S Gao; T Kawasaki; N Tsuji

  JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2024年03月, 査読有り

  
• Grain-level mechanism of plastic deformation in harmonic structure materials revealed by high resolution X-ray diffraction

  E Sjögren-Levin; W Pantleon; A Ahadi; Z Hegedüs; U Lienert; N Tsuji; K Ameyama; D Orlov

  ACTA MATERIALIA, 2024年02月, 査読有り

  
• Unique microstructure formations during low-temperature partitioning after intercritical annealing in low alloy multi-phase TRIP steel and their mechanical behavior clarified by in-situ synchrotron X-Ray diffraction

  A Lavakumar; MH Park; R Gholizadeh; RK Ray; M Murayama; N Tsuji

  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023年06月, 査読有り

  
• Evaluation for morphology of regions having microtexture in Ti-6Al-4V alloy forging products

  Ito, Y.; Takamatsu, H.; Saeki, S.; Tsuji, N.

  R and D: Research and Development Kobe Steel Engineering Reports, 2020年

  
• STRENGTHENING MECHANISMS, FLOW INSTABILITIES AND PROPERTY OPTIMIZATION IN NANOSTRUCTURED METALS

  Huang, X; Tsuji, N; Pantleon, W; Grivel, JC; Hansen, N; Jensen, DJ; Mishin, OV; Nielsen, SF; Toftegaard, H; Winther, G; Yu, T

  2009年

  
• AGING BEHAVIOR OF AL-0.2WT%SC DEFORMED TO ULTRA HIGH STRAIN BY ARB PROCESS

  Terada, D; Sato, T; Tsuji, N; Grivel, JC; Hansen, N; Huang, X; Jensen, DJ; Mishin, OV; Nielsen, SF; Pantleon, W; Toftegaard, H; Winther, G; Yu, T

  2009年

  
• Unique deformation behaviors of the ultrafine grained aluminum alloys fabricated by accumulative roll bonding

  Tsuji, N; Zhu, YT; Varyukhin, V

  2006年

  
• Initial orientation dependence of recrystallization in hot-deformed ferritic steel

  Tsuji, N; Saito, Y; Shinmiya, T; Ch; ra, T; Sakai, T

  1997年

  
• Effect of Zr micro-alloying on microstructure refinement and mechanical property of CoCrNi medium-entropy alloy processed by high-pressure torsion and subsequent annealing

  Bhukya Devendar Singh Rathod; Reza Gholizadeh; Myeong-heom Park; Shuhei Yoshida; Nobuhiro Tsuji

  Journal of Materials Science, 2023年12月31日

  
• Mechanical Dissolution of Cu₅Zr Phase and Formation of Supersaturated Solid-Solution Nanocrystalline Structure by High-Pressure Torsion in a Hypoeutectic Cu–2.7 at%Zr Alloy

  Kenta Miyamoto; Takahiro Kunimine; Chihiro Watanabe; Ryoichi Monzen; Reza Gholizadeh; Nobuhiro Tsuji

  MATERIALS TRANSACTIONS, 2023年12月01日

  
• On the Aging Behavior of Ti-1.0 wt pct Fe Alloy With an Equiaxed alpha plus beta Initial Microstructure

  Y Chong; JH Yi; GY Deng; N Tsuji

  METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2023年06月, 査読有り

  
• New insights into the colony refinement mechanism by solute boron atoms in Ti-6Al-4V alloy

  Yan Chong; Reza Gholizadeh; Kaichi Yamamoto; Nobuhiro Tsuji

  Scripta Materialia, 2023年06月, 査読有り

  
• Stress partitioning in harmonic structure materials at the early stages of tensile loading studied in situ by synchrotron X-ray diffraction

  Elis Sjögren-Levin; Wolfgang Pantleon; Aylin Ahadi; Zoltan Hegedüs; Ulrich Lienert; Nobuhiro Tsuji; Kei Ameyama; Dmytro Orlov

  Scripta Materialia, 2023年03月, 査読有り

  
• Characterization of local deformation and fracture behavior in ferrite plus martensite dual-phase steels having different grain sizes

  朴 明験; 田鎖 悠一; 辻 伸泰

  IOP Conference Series: Materials Science and Engineering, 2022年, 査読有り

  この論文にアクセスする：

  
• Highly deformable Laves phase in a high entropy alloy

  P.K. Ojha; S. Yoshida; U. Sunkari; B. Tripathy; N. Tsuji; P.P. Bhattacharjee

  Scripta Materialia, 2024年02月

  
• Improvement of resistance against hydrogen embrittlement by controlling carbon segregation at prior austenite grain boundary in 3Mn-0.2C martensitic steels

  Kazuho Okada; Akinobu Shibata; Taisuke Sasaki; Hisashi Matsumiya; Kazuhiro Hono; Nobuhiro Tsuji

  SCRIPTA MATERIALIA, 2023年02月

  この論文にアクセスする：

  
• Hydrogen-related Fatigue Fracture under Various Test Frequencies in Low-carbon Martensitic Steel

  Hisashi Matsumiya; Akinobu Shibata; Yoshiaki Maegawa; Kazuho Okada; Nobuhiro Tsuji

  ISIJ INTERNATIONAL, 2022年

  この論文にアクセスする：

  
• Origin of Serrated Markings on the Hydrogen Related Quasi-cleavage Fracture in Low-carbon Steel with Ferrite Microstructure

  Kazuho Okada; Akinobu Shibata; Hisashi Matsumiya; Nobuhiro Tsuji

  ISIJ INTERNATIONAL, 2022年

  この論文にアクセスする：

  
• Proposing the Concept of Plaston and Strategy to Manage Both High Strength and Large Ductility in Advanced Structural Materials, on the Basis of Unique Mechanical Properties of Bulk Nanostructured Metals

  Nobuhiro Tsuji; Shigenobu Ogata; Haruyuki Inui; Isao Tanaka; Kyosuke Kishida

  The Plaston Concept: Plastic Deformation in Structural Materials, 2022年01月01日

  
• Quantitatively evaluating the huge Lüders band deformation in an ultrafine grain stainless steel by combining in situ neutron diffraction and digital image correlation analysis

  Wenqi Mao; Si Gao; Wu Gong; Stefanus Harjo; Takuro Kawasaki; Nobuhiro Tsuji

  Scripta Materialia, 2023年10月

  
• Quantitatively evaluating respective contribution of austenite and deformation-induced martensite to flow stress, plastic strain, and strain hardening rate in tensile deformed TRIP steel

  Wenqi Mao; Si Gao; Wu Gong; Yu Bai; Stefanus Harjo; Myeong Heom Park; Akinobu Shibata; Nobuhiro Tsuji

  Acta Materialia, 2023年09月01日

  
• Oxygen interstitials make metastable β titanium alloys strong and ductile

  Yan Chong; Reza Gholizadeh; Baoqi Guo; Tomohito Tsuru; Guohua Zhao; Shuhei Yoshida; Masatoshi Mitsuhara; Andrew Godfrey; Nobuhiro Tsuji

  Acta Materialia, 2023年07月

  
• Characteristics and formation mechanism of serrated markings on the hydrogen-related quasi-cleavage fracture in as quenched low-carbon martensitic steel

  Kazuho Okada; Akinobu Shibata; Nobuhiro Tsuji

  Scripta Materialia, 2023年09月

  
• Role of surrounding phases on deformation-induced martensitic transformation of retained austenite in multi-phase TRIP steel

  Avala Lavakumar; Myeong heom Park; Sukyoung Hwang; Hiroki Adachi; Masugu Sato; Ranjit Kumar Ray; Mitsuhiro Murayama; Nobuhiro Tsuji

  Materials Science and Engineering A, 2023年05月25日

  
• Grain refinement in titanium prevents low temperature oxygen embrittlement

  Yan Chong; Reza Gholizadeh; Tomohito Tsuru; Ruopeng Zhang; Koji Inoue; Wenqiang Gao; Andy Godfrey; Masatoshi Mitsuhara; J. W. Morris; Andrew M. Minor; Nobuhiro Tsuji

  Nature Communications, 2023年02月01日

  この論文にアクセスする：

  
• Characteristic strengthening mechanisms in body-centered cubic refractory high/medium entropy alloys

  Qian He; Shuhei Yoshida; Nobuhiro Tsuji

  Scripta Materialia, 2023年07月

  この論文にアクセスする：

  
• Lattice parameters of austenite and martensite during transformation for Fe–18Ni alloy investigated through in-situ neutron diffraction

  Wu Gong; Stefanus Harjo; Yo Tomota; Satoshi Morooka; Takuro Kawasaki; Akinobu Shibata; Nobuhiro Tsuji

  Acta Materialia, 2023年05月

  
• Yield and flow properties of ultra-fine, fine, and coarse grain microstructures of FeCoNi equiatomic alloy at ambient and cryogenic temperatures

  Avala Lavakumar; Shuhei Yoshida; Jesada Punyafu; Shiro Ihara; Yan Chong; Hikaru Saito; Nobuhiro Tsuji; Mitsuhiro Murayama

  Scripta Materialia, 2023年06月

  
• Microstructural factors dictating the initial plastic deformation behavior of an ultrafine-grained Fe–22Mn-0.6C TWIP steel

  Jesada Punyafu; Sukyoung Hwang; Shiro Ihara; Hikaru Saito; Nobuhiro Tsuji; Mitsuhiro Murayama

  Materials Science and Engineering: A, 2023年01月, 査読有り

  
• Preface to the Special Issue on “Strength, Plasticity, and Fracture in Steels: Towards Quantitative Bridging of Experiment and Simulation”

  Yoshikazu Todaka; Masaki Tanaka; Akinobu Shibata; Nobuhiro Tsuji

  ISIJ International, 2022年10月15日

  
• Global understanding of deformation behavior in CoCrFeMnNi high entropy alloy under high-strain torsion deformation at a wide range of elevated temperatures

  Reza Gholizadeh; Shuhei Yoshida; Yu Bai; Shu Kurokawa; Akinobu Shibata; Nobuhiro Tsuji

  Acta Materialia, 2023年01月

  この論文にアクセスする：

  
• Unexpected dynamic transformation from α phase to β phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformation

  Baoqi Guo; Wenqi Mao; Yan Chong; Akinobu Shibata; Stefanus Harjo; Wu Gong; Huicong Chen; John J. Jonas; Nobuhiro Tsuji

  Acta Materialia, 2023年01月

  この論文にアクセスする：

  
• Compressive deformation behavior of AZ31 alloy at 21K: an in-situ neutron diffraction study

  W. Gong; T. Kawasaki; R. Zheng; T. Mayama; B. Sun; K. Aizawa; S. Harjo; N. Tsuji

  Scripta Materialia, 2022年11月, 査読有り

  
• Fabrication of ultrarine grained metallic materials by accumulative roll-bonding

  N Tsuji; Y Minamino; Y Koizumi; Y Saito

  PROCESSING AND FABRICATION OF ADVANCED MATERIALS XI, 2003年, 査読有り

  
• Destruction of mesoscopic chemically modulated domains in single phase high entropy alloy via plastic deformation

  Yoji Miyajima; Tomohiro Nagata; Kohei Takeda; Shuhei Yoshida; Satoshi Yasuno; Chihiro Watanabe; Ishikawa Kazuhiro; Hiroki Adachi; Nobuhiro Tsuji

  Scientific Reports, 2022年10月06日

  この論文にアクセスする：

  
• 亜共晶Cu–2.7at％Zr合金における高圧ねじり加工によるCu₅Zr相の消失と過飽和固溶体ナノ結晶組織の形成

  宮本 健太; 國峯 崇裕; 渡邊 千尋; 門前 亮一; ゴリザデー レザ; 辻 伸泰

  銅と銅合金, 2021年, 査読有り

  
• Ultrahigh yield strength and large uniform elongation achieved in ultrafine-grained titanium containing nitrogen

  Yan Chong; Tomohito Tsuru; Baoqi Guo; Reza Gholizadeh; Koji Inoue; Nobuhiro Tsuji

  Acta Materialia, 2022年11月

  
• Rediscovery of Hall-Petch strengthening in bulk ultrafine grained pure Mg at cryogenic temperature: A combined in-situ neutron diffraction and electron microscopy study

  Ruixiao Zheng; Wu Gong; Jun-ping Du; Si Gao; Maowen Liu; Guodong Li; Takuro Kawasaki; Stefanus Harjo; Chaoli Ma; Shigenobu Ogata; Nobuhiro Tsuji

  Acta Materialia, 2022年10月

  
• Discontinuous yielding phenomena triggered by Zn addition in low-alloyed Mg-Al-Ca-Mn alloys

  Z.H. Li; S. Gao; T.T. Sasaki; T. Nakata; S. Kamado; N. Tsuji; K. Hono

  Scripta Materialia, 2022年12月

  
• Grain orientation dependence of deformation microstructure evolution and mechanical properties in face-centered cubic high/medium entropy alloys

  S Yoshida; R Fu; W Gong; T Ikeuchi; Y Bai; Z Feng; G Wu; A Shibata; N Hansen; X Huang; N Tsuji

  IOP Conference Series: Materials Science and Engineering, 2022年07月01日

  この論文にアクセスする：

  
• In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

  Baoqi Guo; Ranjit K. Ray; Shuhei Yoshida; Yu Bai; Nobuhiro Tsuji

  Scripta Materialia, 2022年07月, 査読有り

  
• 3330 超微細粒金属材料の特異な力学特性(S18-3 微細粒組織と強度,S18 材料の強度と組織)

  辻 伸泰

  年次大会講演論文集, 2006年

  
• 金属の繰り返し重ね接合圧延(ARB)プロセスに伴う超微細粒組織の形成

  辻 伸泰

  塑性と加工, 2009年03月25日

  
• 加工組織の局所方位解析における現状と課題

  辻 伸泰

  まてりあ : 日本金属学会会報, 2001年07月20日

  
• 繰り返し重ね接合圧延により強ひずみ加工された極低炭素鋼における超微細結晶粒

  辻 伸泰; 上路 林太郎; 齋藤 好弘

  まてりあ : 日本金属学会会報, 2000年12月20日

  
• W03(1) 巨大ひずみ加工により作製された超微細粒金属の特異な降伏挙動(【W03】超強加工による超微細粒金属の組織と強度)

  辻 伸泰

  年次大会講演資料集, 2007年

  
• アルミニウム超微細結晶粒内の内部応力場のCBED法による測定

  上路 林太郎; 谷口 潤一郎; 田中 克志; 角田 直人; 辻 伸泰

  まてりあ : 日本金属学会会報, 2005年12月20日

  
• ばね鋼SUP7におけるオースフォームドベイナイト

  辻 伸泰; 綾田 倫彦; 高島 大知; 斎藤 好弘

  鐵と鋼 : 日本鐡鋼協會々誌, 1999年05月

  
• コイルばね用中炭素ばね鋼のオースドローイング法の開発

  綾田 倫彦; 井上 和雄; 辻 伸泰; 宇都宮 裕; 斎藤 好弘

  鐵と鋼 : 日本鐡鋼協會々誌, 1999年05月

  
• 315 繰り返し重ね接合圧延した超微細粒材の摩擦攪拌接合

  藤井 英俊; 高田 豊; 辻 伸泰; 前田 将克; 柴柳 敏哉; 中田 一博; 野城 清

  溶接学会全国大会講演概要, 2004年03月21日

  
• Mechanisms of remarkable wear reduction and evolutions of subsurface microstructure and nano-mechanical properties during dry sliding of nano-grained Ti6Al4V alloy: A comparative study

  Guanyu Deng; Yan Chong; Lihong Su; Lihua Zhan; Peitang Wei; Xing Zhao; Liang Zhang; Yanzhong Tian; Hongtao Zhu; Nobuhiro Tsuji

  Tribology International, 2022年05月

  
• Significant Bauschinger effect and back stress strengthening in an ultrafine grained pure aluminum fabricated by severe plastic deformation process

  Si Gao; Kota Yoshino; Daisuke Terada; Yoshihisa Kaneko; Nobuhiro Tsuji

  Scripta Materialia, 2022年04月

  この論文にアクセスする：

  
• Achieving excellent mechanical properties in type 316 stainless steel by tailoring grain size in homogeneously recovered or recrystallized nanostructures

  Maowen Liu; Wu Gong; Ruixiao Zheng; Jin Li; Zhe Zhang; Si Gao; Chaoli Ma; Nobuhiro Tsuji

  Acta Materialia, 2022年03月

  
• Effective grain size refinement of an Fe-24Ni-0.3C metastable austenitic steel by a modified two-step cold rolling and annealing process utilizing the deformation-induced martensitic transformation and its reverse transformation

  Wenqi Mao; Si Gao; Yu Bai; Myeong heom Park; Akinobu Shibata; Nobuhiro Tsuji

  Journal of Materials Research and Technology, 2022年03月01日

  この論文にアクセスする：

  
• Hydrogen-Related Fracture Behavior under Constant Loading Tensile Test in As-Quenched Low-Carbon Martensitic Steel

  Akinobu Shibata; Yasunari Takeda; Yuuji Kimura; Nobuhiro Tsuji

  Metals, 2022年03月

  
• Effect of hydrogen on evolution of deformation microstructure in low-carbon steel with ferrite microstructure

  Kazuho Okada; Akinobu Shibata; Wu Gong; Nobuhiro Tsuji

  Acta Materialia, 2022年02月15日

  この論文にアクセスする：

  
• In-situ observation of twinning and detwinning in AZ31 alloy

  Wu Gong; Ruixiao Zheng; Stefanus Harjo; Takuro Kawasaki; Kazuya Aizawa; Nobuhiro Tsuji

  Journal of Magnesium and Alloys, 2022年

  この論文にアクセスする：

  
• Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy

  Adrianna Lozinko; Reza Gholizadeh; Yubin Zhang; Uta Klement; Nobuhiro Tsuji; Oleg V. Mishin; Sheng Guo

  Materials Science and Engineering: A, 2022年01月

  
• Hydrogen embrittlement behaviors at different deformation temperatures in as-quenched low-carbon martensitic steel

  Yuji Momotani; Akinobu Shibata; Nobuhiro Tsuji

  International Journal of Hydrogen Energy, 2022年01月

  
• Effect of high pressure torsion process on the microhardness, microstructure and tribological property of Ti6Al4V alloy

  Guanyu Deng; Xing Zhao; Lihong Su; Peitang Wei; Liang Zhang; Lihua Zhan; Yan Chong; Hongtao Zhu; Nobuhiro Tsuji

  Journal of Materials Science and Technology, 2021年12月20日

  
• Investigating the dislocation reactions on Σ3{111} twin boundary during deformation twin nucleation process in an ultrafine-grained high-manganese steel

  Chang Yu Hung; Tomotsugu Shimokawa; Yu Bai; Nobuhiro Tsuji; Mitsuhiro Murayama

  Scientific Reports, 2021年12月

  
• Editorial: New Developments and Challenges in Advanced High-Strength Steels

  Lijia Zhao; John G. Speer; Peter Hodgson; Nobuhiro Tsuji

  Frontiers in Materials, 2021年11月11日

  
• Characteristics of hydrogen-related fatigue fracture in 2Mn-0.1C martensitic steel

  Hisashi Matsumiya; Akinobu Shibata; Kazuho Okada; Nobuhiro Tsuji

  International Journal of Hydrogen Energy, 2021年10月

  
• Advanced Thermomechanical Processing of Steels

  Nobuhiro Tsuji

  Encyclopedia of Materials: Metals and Alloys, 2021年09月01日

  
• Direct observation of grain boundary formation in bcc iron through TEM in situ compression test

  Hongxing Li; Seiichiro Ii; Nobuhiro Tsuji; Takahito Ohmura

  Scripta Materialia, 2022年01月

  
• Grain size altering yielding mechanisms in ultrafine grained high-Mn austenitic steel: Advanced TEM investigations

  Chang-Yu Hung; Yu Bai; Nobuhiro Tsuji; Mitsuhiro Murayama

  Journal of Materials Science & Technology, 2021年09月

  
• Direct observation of local chemical ordering in a few nanometer range in CoCrNi medium-entropy alloy by atom probe tomography and its impact on mechanical properties

  Koji Inoue; Shuhei Yoshida; Nobuhiro Tsuji

  Physical Review Materials, 2021年08月26日

  この論文にアクセスする：

  
• Unique transition of yielding mechanism and unexpected activation of deformation twinning in ultrafine grained Fe-31Mn-3Al-3Si alloy

  Yu Bai; Hiroki Kitamura; Si Gao; Yanzhong Tian; Nokeun Park; Myeong-heom Park; Hiroki Adachi; Akinobu Shibata; Masugu Sato; Mitsuhiro Murayama; Nobuhiro Tsuji

  SCIENTIFIC REPORTS, 2021年08月, 査読有り

  
• A unique three-stage dependence of yielding behavior and strain-hardening ability in Ti-10V-2Fe-3Al alloy on phase fraction

  Yan Chong; Si Gao; Nobuhiro Tsuji

  Materials Science and Engineering: A, 2021年07月, 査読有り

  
• Microstructure, texture and mechanical properties of sandwiched ARB6/2/6 2N Al fabricated by accumulative roll bonding

  Xiaojuan Jiang; Si Gao; Ling Zhang; Guilin Wu; Xiaoxu Huang; Nobuhiro Tsuji

  Materials Science and Engineering: A, 2021年06月

  
• Achieving large super-elasticity through changing relative easiness of deformation modes in Ti-Nb-Mo alloy by ultra-grain refinement

  Bingjie Zhang; Mingda Huang; Yan Chong; Wenqi Mao; Wu Gong; Ruixiao Zheng; Yu Bai; Dong Wang; Qiaoyan Sun; Yunzhi Wang; Nobuhiro Tsuji

  Materials Research Letters, 2021年05月04日

  この論文にアクセスする：

  
• Effects of local stress, strain, and hydrogen content on hydrogen-related fracture behavior in low-carbon martensitic steel

  Akinobu Shibata; Takashi Yonemura; Yuji Momotani; Myeong-heom Park; Shusaku Takagi; Yazid Madi; Jacques Besson; Nobuhiro Tsuji

  Acta Materialia, 2021年05月

  
• A correlation between grain boundary character and deformation twin nucleation mechanism in coarse-grained high-Mn austenitic steel

  Chang-Yu Hung; Yu Bai; Tomotsugu Shimokawa; Nobuhiro Tsuji; Mitsuhiro Murayama

  SCIENTIFIC REPORTS, 2021年04月, 査読有り

  
• Corrigendum to ‘Strategy for Managing Both High Strength and Large Ductility in Structural Materials - sequential nucleation of different deformation modes based on a concept of plaston’ [Scripta Materialia 181 (2020) 35-42/ SMM 13102]

  Nobuhiro Tsuji; Shigenobu Ogata; Haruyuki Inui; Isao Tanaka; Kyosuke Kishida; Si Gao; Wenqi Mao; Yu Bai; Ruixiao Zheng; Jun-Ping Du

  Scripta Materialia, 2021年04月

  
• Deformation mechanism of bimodal microstructure in Ti-6Al-4V alloy: The effects of intercritical annealing temperature and constituent hardness

  Yan Chong; Tilak Bhattacharjee; Yanzhong Tian; Akinobu Shibata; Nobuhiro Tsuji

  Journal of Materials Science and Technology, 2021年04月

  
• Mechanical response of dislocation interaction with grain boundary in ultrafine-grained interstitial-free steel

  Hongxing Li; Si Gao; Yo Tomota; Seiichiro Ii; Nobuhiro Tsuji; Takahito Ohmura

  Acta Materialia, 2021年03月

  
• Mesoscopic nature of serration behavior in high-Mn austenitic steel

  Sukyoung Hwang; Myeong-heom Park; Yu Bai; Akinobu Shibata; Wenqi Mao; Hiroki Adachi; Masugu Sato; Nobuhiro Tsuji

  Acta Materialia, 2021年02月

  この論文にアクセスする：

  
• Crystallographic analysis of fatigue fracture initiation in 8Ni-0.1C martensitic steel

  Kazuho Okada; Akinobu Shibata; Yasunari Takeda; Nobuhiro Tsuji

  International Journal of Fatigue, 2021年02月

  この論文にアクセスする：

  
• Heterostructured materials: superior properties from hetero-zone interaction

  Yuntian Zhu; Kei Ameyama; Peter M. Anderson; Irene J. Beyerlein; Huajian Gao; Hyoung Seop Kim; Enrique Lavernia; Suveen Mathaudhu; Hael Mughrabi; Robert O. Ritchie; Nobuhiro Tsuji; Xiangyi Zhang; Xiaolei Wu

  Materials Research Letters, 2021年01月02日

  この論文にアクセスする：

  
• 異種変形モードの核生成制御による高強度・高延性金属の実現

  辻伸泰; 下川智嗣; 志澤一之; 村山光宏

  まてりあ, 2021年01月01日

  
• Tensile Deformation of Ultrafine-Grained Fe-Mn-Al-Ni-C Alloy Studied by In Situ Synchrotron Radiation X-ray Diffraction

  Si Gao; Takuma Yoshimura; Wenqi Mao; Yu Bai; Wu Gong; Myeong-heom Park; Akinobu Shibata; Hiroki Adachi; Masugu Sato; Nobuhiro Tsuji

  Crystals, 2020年12月07日

  
• Yield strength and misfit volumes of NiCoCr and implications for short-range-order

  Binglun Yin; Shuhei Yoshida; Nobuhiro Tsuji; W. A. Curtin

  Nature Communications, 2020年12月01日

  この論文にアクセスする：

  
• Challenging Ultra Grain Refinement of Ferrite in Low-C Steel Only by Heat Treatment

  Park, M.-H.; Shibata, A.; Tsuji, N.

  Frontiers in Materials, 2020年11月26日

  
• Editorial: Trends and Advances in Nano-Structured Materials With Novel Structures and Properties

  Tian, Y.; Zhang, Z.; Tsuji, N.

  Frontiers in Materials, 2020年10月, 査読有り

  
• Significant transitions of mechanical properties by changing temperature in Cu-Al alloys with heterogeneous microstructures

  H. R. Lin; Y. Z. Tian; S. J. Sun; Z. J. Zhang; Y. Bai; J. T. Lu; Z. F. Zhang; N. Tsuji

  Materials Characterization, 2020年10月

  
• Enhanced mechanical properties in β-Ti alloy aged from recrystallized ultrafine β grains

  Bingjie Zhang; Yan Chong; Ruixiao Zheng; Yu Bai; Reza Gholizadeh; Mingda Huang; Dong Wang; Qiaoyan Sun; Yunzhi Wang; Nobuhiro Tsuji

  Materials and Design, 2020年10月

  この論文にアクセスする：

  
• Transition of dominant deformation mode in bulk polycrystalline pure Mg by ultra-grain refinement down to sub-micrometer

  Ruixiao Zheng; Jun-Ping Du; Si Gao; Hidetoshi Somekawa; Shigenobu Ogata; Nobuhiro Tsuji

  Acta Materialia, 2020年10月01日, 査読有り

  この論文にアクセスする：

  
• A Concentrated AlCl3-Diglyme Electrolyte for Hard and Corrosion-Resistant Aluminum Electrodeposits

  Zelei Zhang; Atsushi Kitada; Si Gao; Kazuhiro Fukami; Nobuhiro Tsuji; Zhengjun Yao; Kuniaki Murase

  ACS Applied Materials and Interfaces, 2020年09月23日

  この論文にアクセスする：

  
• Heterogeneity and Homogeneity in 2/4 N Multilayered Al Fabricated by Accumulative Roll Bonding and Annealing

  Xiaojuan Jiang; Si Gao; Ling Zhang; Guilin Wu; Xiaoxu Huang; Nobuhiro Tsuji

  Journal of Materials Engineering and Performance, 2020年09月01日

  
• Microstructure and texture of A1050 aluminum strips produced by melt direct-rolling method

  Yuichi Nagai; Nobuhiro Tsuji; Tetsuo Sakai; Yoshihiro Saito

  Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 2020年08月

  
• Plastic strain-induced sequential martensitic transformation

  Shaolou Wei; Jinwoo Kim; Jaclyn Leigh Cann; Reza Gholizadeh; Nobuhiro Tsuji; Cemal Cem Tasan

  Scripta Materialia, 2020年08月

  
• Grain refinement mechanisms in BCC ferritic steel and FCC austenitic steel highly deformed under different temperatures and strain rates

  Reza Gholizadeh; Akinobu Shibata; Nobuhiro Tsuji

  Materials Science and Engineering A, 2020年07月14日

  
• Two-stage Hall-Petch relationship in Cu with recrystallized structure

  Y. Z. Tian; Y. P. Ren; S. Gao; R. X. Zheng; J. H. Wang; H. C. Pan; Z. F. Zhang; N. Tsuji; G. W. Qin

  Journal of Materials Science and Technology, 2020年07月01日

  
• Investigation on the Microstructure and Mechanical Properties of Ti-1.0Fe Alloy with Equiaxed α + β Microstructures

  Yan Chong; Ruixiao Zheng; Guanyu Deng; Akinobu Shibata; Nobuhiro Tsuji

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2020年06月01日

  
• Influence of Fe addition in CP titanium on phase transformation, microstructure and mechanical properties during high pressure torsion

  Guanyu Deng; Tilak Bhattacharjee; Yan Chong; Ruixiao Zheng; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji

  Journal of Alloys and Compounds, 2020年05月05日

  
• Development of aus-drawing process in medium carbon spring steel for coil springs

  Michihiko Ayada; Kazuo Inoue; Nobuhiro Tsuji; Hiroshi Utsunomiya; Yoshihiro Saito

  Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 2020年05月

  
• Ausformed bainite in SUP7 spring steel

  Nobuhiro Tsuji; Michihiko Ayada; Taichi Takashima; Yoshihiro Saito

  Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 2020年05月

  
• Strategy for managing both high strength and large ductility in structural materials–sequential nucleation of different deformation modes based on a concept of plaston

  Nobuhiro Tsuji; Shigenobu Ogata; Haruyuki Inui; Isao Tanaka; Kyosuke Kishida; Si Gao; Wenqi Mao; Yu Bai; Ruixiao Zheng; Jun-Ping Du

  Scripta Materialia, 2020年05月, 査読有り

  
• Termination of local strain concentration led to better tensile ductility in multilayered 2N/4N Al sheet

  Xiaojuan Jiang; Yu Bai; Ling Zhang; Guilin Wu; Si Gao; Xiaoxu Huang; Nobuhiro Tsuji

  Materials Science and Engineering A, 2020年04月

  
• Microstructural evolution and mechanical properties of nanostructured Cu/Ni multilayer fabricated by accumulative roll bonding

  Yufeng Sun; Yao Chen; Nobuhiro Tsuji; Shaokang Guan

  Journal of Alloys and Compounds, 2020年04月

  
• Effect of initial dislocation density on hydrogen accumulation behavior in martensitic steel

  Yuji Momotani; Akinobu Shibata; Takashi Yonemura; Yu Bai; Nobuhiro Tsuji

  Scripta Materialia, 2020年03月15日, 査読有り

  
• Strain-dependence of deformation microstructures in ultra-low-C IF steel deformed to high strains by torsion at elevated temperatures

  Gholizadeh, R.; Terada, D.; Shibata, A.; Tsuji, N.

  Nano Materials Science, 2020年03月

  
• Formation of ultra-fine grains in 5182 aluminum alloy heavily rolled at warm temperatures

  Nobuhiro Tsuji; Takeshi Murakami; Yoshihiro Saito

  Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 2020年02月

  
• Unique high-temperature deformation dominated by grain boundary sliding in heterogeneous necklace structure formed by dynamic recrystallization in HfNbTaTiZr BCC refractory high entropy alloy

  Rajeshwar R. Eleti; Atul H. Chokshi; Akinobu Shibata; Nobuhiro Tsuji

  Acta Materialia, 2020年01月15日, 査読有り

  
• ハイエントロピー合金の結晶粒超微細化

  吉田周平; 池内琢人; Bhattacharjee Tilak; Bai Yu; 柴田曉伸; 辻伸泰

  粉体および粉末冶金, 2020年

  この論文にアクセスする：

  
• Effect of elemental combination on microstructure and mechanical properties of quaternary refractory medium entropy alloys

  Qian He; Shuhei Yoshida; Hideyuki Yasuda; Nobuhiro Tsuji

  Materials Transactions, 2020年

  
• Effect of cobalt-content on mechanical properties of non-equiatomic CoCrNi medium entropy alloys

  Shuhei Yoshida; Takuto Ikeuchi; Yu Bai; Nobuhiro Tsuji

  Materials Transactions, 2020年

  
• Linking local and heterogeneous deformation behavior to global deformation of materials by in-situ experimental techniques

  Nobuhiro Tsuji; Myeong Heom Park; Si Gao; Yu Bai; Yan Chong

  IOP Conference Series: Materials Science and Engineering, 2019年12月09日, 査読有り

  
• In-situ neutron diffraction study on the deformation of a TRIP-assisted multi-phase steel composed of ferrite, austenite and martensite

  A. Lavakumar; M. H. Park; S. Gao; A. Shibata; Y. Okitsu; W. Gong; S. Harjo; N. Tsuji

  IOP Conference Series: Materials Science and Engineering, 2019年12月09日, 査読有り

  
• Deformation microstructures and strength of face-centered cubic high/medium entropy alloys

  Shuhei Yoshida; Takuto Ikeuchi; Yu Bai; Akinobu Shibata; Niels Hansen; Xiaoxu Huang; Nobuhiro Tsuji

  IOP Conference Series: Materials Science and Engineering, 2019年12月09日, 査読有り

  
• Nanostructuring with Structural-Compositional Dual Heterogeneities Enhances Strength-Ductility Synergy in Eutectic High Entropy Alloy

  S. R. Reddy; S. Yoshida; T. Bhattacharjee; N. Sake; A. Lozinko; S. Guo; P. P. Bhattacharjee; N. Tsuji

  Scientific Reports, 2019年12月01日, 査読有り

  この論文にアクセスする：

  
• Change of Deformation Mechanisms Leading to High Strength and Large Ductility in Mg-Zn-Zr-Ca Alloy with Fully Recrystallized Ultrafine Grained Microstructures

  Ruixiao Zheng; Tilak Bhattacharjee; Si Gao; Wu Gong; Akinobu Shibata; Taisuke Sasaki; Kazuhiro Hono; Nobuhiro Tsuji

  Scientific Reports, 2019年12月01日, 査読有り

  この論文にアクセスする：

  
• Ultra-strong, ductile and thermally stable ultrafine grained 5083 Al alloy fabricated by high pressure torsion using pre-sintered powders

  Maowen Liu; Ruixiao Zheng; Chaoli Ma; Nobuhiro Tsuji

  Materialia, 2019年12月, 査読有り

  
• Achieving bi-lamellar microstructure with both high tensile strength and large ductility in Ti–6Al–4V alloy by novel thermomechanical processing

  Yan Chong; Tilak Bhattacharjee; Yi Jangho; Shiteng Zhao; Nobuhiro Tsuji

  Materialia, 2019年12月, 査読有り

  
• Investigation on the hot deformation behaviors and globularization mechanisms of lamellar Ti–6Al–4V alloy within a wide range of deformation temperatures

  Chong Yan; Gholizadeh Reza; Yi Jangho; Tsuji Nobuhiro

  Materialia, 2019年12月, 査読有り

  
• On the strain hardening abilities of α+β titanium alloys: The roles of strain partitioning and interface length density

  Chong Yan; Guanyu Deng; Yi Jangho; Akinobu Shibata; Nobuhiro Tsuji

  JOURNAL OF ALLOYS AND COMPOUNDS, 2019年11月30日, 査読有り

  
• Microstructure evolution during thermomechanical processing in 3Mn-0.1C medium-Mn steel

  Feifei Hou; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji

  Materials Science and Technology (United Kingdom), 2019年11月22日, 査読有り

  
• Mechanical and microstructural analysis on hydrogen-related fracture in a martensitic steel

  Akinobu Shibata; Yazid Madi; Kazuho Okada; Nobuhiro Tsuji; Jacques Besson

  International Journal of Hydrogen Energy, 2019年11月05日, 査読有り

  
• Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures

  Yan Chong; Guanyu Deng; Si Gao; Jangho Yi; Akinobu Shibata; Nobuhiro Tsuji

  Scripta Materialia, 2019年11月, 査読有り

  
• Effect of Hydrogen on the Substructure of Lenticular Martensite in Fe-31Ni Alloy

  Akinobu Shibata; Masanori Enoki; Nahoko Saji; Hirotaka Tai; Motomichi Koyama; Hiroshi Ohtani; Nobuhiro Tsuji; Kaneaki Tsuzaki

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2019年09月15日, 査読有り

  
• Engineering heterogeneous microstructure by severe warm-rolling for enhancing strength-ductility synergy in eutectic high entropy alloys

  S. R. Reddy; S. Yoshida; U. Sunkari; A. Lozinko; J. Joseph; R. Saha; D. Fabijanic; S. Guo; P. P. Bhattacharjee; N. Tsuji

  Materials Science and Engineering A, 2019年09月09日, 査読有り

  
• Synergistic effect by Al addition in improving mechanical performance of CoCrNi medium-entropy alloy

  Donghee Lee; Maya Putri Agustianingrum; Nokeun Park; Nobuhiro Tsuji

  Journal of Alloys and Compounds, 2019年09月05日, 査読有り

  
• 圧延工程の違いによる素材の性質の変化とその影響 : 巨大ひずみ加工を中心に (特集 前加工でこんなに変わる! 知っておきたい材料の特性)

  辻 伸泰

  Abrasive technology : 砥粒加工学会誌 : journal of the Japan Society for Abrasive Technology, 2019年09月, 査読有り

  
• Microstructure evolution and phase transformation of Ti-1.0 wt% Fe alloy with an equiaxed α + β initial microstructure during high-pressure torsion and subsequent annealing

  Y. Chong; G. Deng; A. Shibata; N. Tsuji

  Advanced Engineering Materials, 2019年09月01日, 査読有り

  
• Bi-lamellar microstructure in Ti–6Al–4V: Microstructure evolution and mechanical properties

  Chong Yan; Bhattacharjee Tilak; Tsuji Nobuhiro

  Materials Science and Engineering A, 2019年08月05日, 査読有り

  
• Statistical representation of the microstructure and strength for a two-phase Ti–6Al–4V

  Mostafa Mahdavi; Eric Hoar; Daniel E. Sievers; Yan Chong; Nobuhiro Tsuji; Steven Liang; Hamid Garmestani

  Materials Science and Engineering A, 2019年06月24日, 査読有り

  
• Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys

  Shuhei Yoshida; Takuto Ikeuchi; Tilak Bhattacharjee; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji

  Acta Materialia, 2019年06月01日, 査読有り

  
• Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloy

  Rajeshwar R. Eleti; Tilak Bhattacharjee; Akinobu Shibata; Nobuhiro Tsuji

  Acta Materialia, 2019年06月01日, 査読有り

  
• Global view for grain refinement in ultra-low-C IF steel during high-strain deformation at various temperatures and strain rates

  Reza Gholizadeh; Akinobu Shibata; Nobuhiro Tsuji

  Materialia, 2019年06月, 査読有り

  
• Nature of dynamic ferrite transformation revealed by in-situ neutron diffraction analysis during thermomechanical processing

  Akinobu Shibata; Yasunari Takeda; Nokeun Park; Lijia Zhao; Stefanus Harjo; Takuro Kawasaki; Wu Gong; Nobuhiro Tsuji

  Scripta Materialia, 2019年05月, 査読有り

  
• Effect of aluminum addition on solid solution strengthening in CoCrNi medium-entropy alloy

  Maya Putri Agustianingrum; Shuhei Yoshida; Nobuhiro Tsuji; Nokeun Park

  Journal of Alloys and Compounds, 2019年04月, 査読有り

  
• Strength–ductility balance in an ultrafine-grained non-equiatomic Fe50(CoCrMnNi)50 medium-entropy alloy with a fully recrystallized microstructure

  Minku Choi; Ibrahim Ondicho; Nokeun Park; Nobuhiro Tsuji

  Journal of Alloys and Compounds, 2019年04月, 査読有り

  
• Effect of thermomechanical processing at α + γ two-phase temperatures on microstructure and mechanical property of 5Mn-0.1C-2Si medium-manganese steel

  Yu Bai; Yoichiro Matsui; Akinobu Shibata; Nobuhiro Tsuji

  Materials Science and Engineering A, 2019年01月16日, 査読有り

  
• Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel

  Si Gao; Yu Bai; Ruixiao Zheng; Yanzhong Tian; Wenqi Mao; Akinobu Shibata; Nobuhiro Tsuji

  Scripta Materialia, 2019年01月15日, 査読有り

  
• Resistance to mechanically small fatigue crack growth in ultrafine grained interstitial-free steel fabricated by accumulative roll-bonding

  X. Lin; M. Koyama; S. Gao; N. Tsuji; K. Tsuzaki; H. Noguchi

  International Journal of Fatigue, 2019年01月, 査読有り

  
• ARB加工法によるアルミニウム合金の結晶粒微細化と時効析出挙動

  中川 惠友; 金谷 輝人; 寺田 大将; 辻 伸泰

  軽金属, 2019年

  
• Formation mechanism of ultrafine grained microstructures: Various possibilities for fabricating bulk nanostructured metals and alloys

  Nobuhiro Tsuji; Reza Gholizadeh; Rintaro Ueji; Naoya Kamikawa; Lijia Zhao; Yanzhong Tian; Yu Bai; Akinobu Shibata

  Materials Transactions, 2019年, 査読有り

  
• 超微細粒アルミニウムが示す特異な力学特性の理解—軽金属奨学会2017年度統合的先端研究の成果—

  足立 大樹; 寺田 大将; 辻 伸泰

  軽金属, 2019年, 査読有り

  
• Reverse transformation behavior from martensite to austenite in Ni-C steels studied by in-situ SEM/EBSD analysis

  Natsumi Ooura; Kazuki Fujiwara; Kaori Kawano; Nobuhiro Tsuji

  Materials Science and Technology 2018, MS and T 2018, 2019年

  
• Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing

  T. Bhattacharjee; I. S. Wani; S. Sheikh; I. T. Clark; T. Okawa; S. Guo; P. P. Bhattacharjee; N. Tsuji

  Scientific Reports, 2018年12月01日, 査読有り

  この論文にアクセスする：

  
• Deformation behavior of as-cast and as-extruded Mg97Zn1Y2 alloys during compression, as tracked by in situ neutron diffraction

  Wu Gong; Kazuya Aizawa; Stefanus Harjo; Ruixiao Zheng; Takuro Kawasaki; Jun Abe; Takashi Kamiyama; Nobuhiro Tsuji

  International Journal of Plasticity, 2018年12月, 査読有り

  
• Deformation-assisted diffusion for the enhanced kinetics of dynamic phase transformation

  Lijia Zhao; Nokeun Park; Yanzhong Tian; Akinobu Shibata; Nobuhiro Tsuji

  Materials Research Letters, 2018年11月02日, 査読有り

  
• Ultrafine-grained CuAg7Zr0.05 alloy with fully recrystallized microstructure

  Y. Z. Tian; T. Xiong; S. J. Zheng; Y. Bai; J. Freudenberger; R. Pippan; Z. F. Zhang; N. Tsuji

  Materialia, 2018年11月

  
• Unique effect of carbon addition on development of deformation texture through changes in slip activation and twin deformation in heavily cold-rolled Fe-3% Si alloys

  Masanori Takenaka; Noriki Fujita; Yasuyuki Hayakawa; Nobuhiro Tsuji

  Acta Materialia, 2018年09月15日, 査読有り

  
• Characterization of cold-rolled heterogeneous microstructure formed by multimodal deformation in an Fe-Ni-Al-C alloy with lattice softening

  Tadahiko Furuta; Izuru Miyazaki; Keiichiro Oh-ishi; Shigeru Kuramoto; Akinobu Shibata; Nobuhiro Tsuji

  Materials and Design, 2018年09月05日, 査読有り

  
• Factors determining room temperature mechanical properties of bimodal microstructures in Ti-6Al-4V alloy

  Yan Chong; Tilak Bhattacharjee; Myeong Heom Park; Akinobu Shibata; Nobuhiro Tsuji

  Materials Science and Engineering A, 2018年07月11日, 査読有り

  
• Texture and Mechanical Properties of Al–Mg Alloy with Unimodal and Bimodal Grain-Structures Formed by Accumulative Roll Bonding and Annealing

  Keizo Kashihara; N. Tsuji

  MATERIALS TRANSACTIONS, 2018年07月, 査読有り

  
• Dynamic Transformation Mechanism for Producing Ultrafine Grained Steels

  Lijia Zhao; Nokeun Park; Yanzhong Tian; Akinobu Shibata; Nobuhiro Tsuji

  Advanced Engineering Materials, 2018年07月, 査読有り

  
• Crystallographic feature of hydrogen-related fracture in 2Mn-0.1C ferritic steel

  Kazuho Okada; Akinobu Shibata; Yasunari Takeda; Nobuhiro Tsuji

  International Journal of Hydrogen Energy, 2018年06月14日, 査読有り

  
• Hot deformation behavior of CoCrFeMnNi FCC high entropy alloy

  Rajeshwar R. Eleti; Tilak Bhattacharjee; Lijia Zhao; Pinaki P. Bhattacharjee; Nobuhiro Tsuji

  Materials Chemistry and Physics, 2018年05月01日, 査読有り

  
• Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy

  Tilak Bhattacharjee; Ruixiao Zheng; Yan Chong; Saad Sheikh; Sheng Guo; Ian Thomas Clark; Toshiro Okawa; Irfan Samad Wani; Pinaki Prasad Bhattacharjee; Akinobu Shibata; Nobuhiro Tsuji

  Materials Chemistry and Physics, 2018年05月01日, 査読有り

  
• Overcoming the strength–ductility trade-off via the formation of a thermally stable and plastically unstable austenitic phase in cold-worked steel

  I. Miyazaki; T. Furuta; K. Oh-ishi; T. Nakagaki; S. Kuramoto; A. Shibata; N. Tsuji

  Materials Science and Engineering A, 2018年04月, 査読有り

  
• Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes

  Y. Z. Tian; S. Gao; L. J. Zhao; S. Lu; R. Pippan; Z. F. Zhang; N. Tsuji

  Scripta Materialia, 2018年01月01日, 査読有り

  
• ハイエントロピー合金におけるミクロ組織制御の可能性

  辻 伸泰; 朴 魯謹; 李 翔; Rajeshwar Reddy Eleti; 吉田 周平; Tilak Bhattacharjee; 白 玉; Pinaki Prasad Bhattacharjee; 黒川 修

  まてりあ, 2018年01月, 査読有り

  
• Ultrafine grained structure and improved mechanical properties of low temperature friction stir spot welded 6061-T6 Al alloys

  Yufeng Sun; Yoshiaki Morisada; Hidetoshi Fujii; Nobuhiro Tsuji

  Materials Characterization, 2018年01月, 査読有り

  
• Texture and mechanical properties of AlMg alloy with unimodal and bimodal grain-structures formed by accumulative roll bonding and annealing

  Keizo Kashihara; Nobuhiro Tsuji

  Materials Transactions, 2018年, 査読有り

  
• Effect of grain size on mechanical properties of mg-0.3at.%y dilute alloy

  Ruixiao Zheng; Ichiro Kawarada; Wu Gong; Akinobu Shibata; Hidetoshi Somekawa; Shigenobu Ogata; Nobuhiro Tsuji

  Materials Science Forum, 2018年, 査読有り

  
• Unique effect of carbon addition on development of deformation and recrystallization textures in heavily cold-rolled fe-3%si alloys

  Masanori Takenaka; Yasuyuki Hayakawa; Nobuhiro Tsuji

  Materials Science Forum, 2018年, 査読有り

  
• Microstructure evolution and change in mechanical properties of medium mn steels during thermomechanical processing

  Feifei Hou; Atsushi Ito; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji

  Materials Science Forum, 2018年, 査読有り

  
• Ten Years of Severe Plastic Deformation (SPD) in Iran, Part II: Accumulative Roll Bonding (ARB)

  M. Reihanian; E. Bagherpour; N. Pardis; R. Ebrahimi; N. Tsuji

  Iranian J. Mater. Form., 2018年

  
• Hydrogen embrittlement behaviors of ultrafine-grained 22Mn-0.6C austenitic twinning induced plasticity steel

  Yu Bai; Yanzhong Tian; Si Gao; Akinobu Shibata; Nobuhiro Tsuji

  Journal of Materials Research, 2017年12月28日, 査読有り

  
• Deformation Induced Martensitic Transformation and Its Initial Microstructure Dependence in a High Alloyed Duplex Stainless Steel

  Lin Xie; Tian Lin Huang; Yu Hui Wang; Gui Lin Wu; Nobuhiro Tsuji; Xiao Xu Huang

  Steel Research International, 2017年12月, 査読有り

  
• On the Stability of Reversely Formed Austenite and Related Mechanism of Transformation in an Fe-Ni-Mn Martensitic Steel Aided by Electron Backscattering Diffraction and Atom Probe Tomography

  Hamidreza Koohdar; Mahmoud Nili-Ahmadabadi; Mohammad Habibi-Parsa; Hamid Reza Jafarian; Tilak Bhattacharjee; Nobuhiro Tsuji

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2017年11月01日, 査読有り

  
• Microstructural and crystallographic features of hydrogen-related fracture in lath martensitic steels

  Akinobu Shibata; Yuji Momotani; Tamotsu Murata; Takahiro Matsuoka; Mizuki Tsuboi; Nobuhiro Tsuji

  Materials Science and Technology (United Kingdom), 2017年09月02日, 査読有り

  
• Mechanical properties of fully martensite microstructure in Ti-6Al-4V alloy transformed from refined beta grains obtained by rapid heat treatment (RHT)

  Yan Chong; Tilak Bhattacharjee; Jangho Yi; Akinobu Shibata; Nobuhiro Tsuji

  Scripta Materialia, 2017年09月, 査読有り

  
• SEM/EBSD Analysis on Globularization Behavior of Lamellar Microstructure in Ti-6Al-4V During Hot Deformation and Annealing

  Yoshinori Ito; Shogo Murakami; Nobuhiro Tsuji

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2017年09月01日, 査読有り

  
• Microstructures and mechanical property of a Fe-Ni-Al-C alloy containing B2 intermetallic compounds

  Si Gao; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji

  IOP Conference Series: Materials Science and Engineering, 2017年08月01日, 査読有り

  
• Reason for high strength and good ductility in dual phase steels composed of soft ferrite and hard martensite

  Daisuke Terada; Gosuke Ikeda; Myeong Heom Park; Akinobu Shibata; Nobuhiro Tsuji

  IOP Conference Series: Materials Science and Engineering, 2017年08月01日, 査読有り

  この論文にアクセスする：

  
• Investigation of the grain size effect on mechanical properties of Ti-6Al-4V alloy with equiaxed and bimodal microstructures

  Yan Chong; Tilak Bhattacharjee; Akinobu Shibata; Nobuhiro Tsuji

  IOP Conference Series: Materials Science and Engineering, 2017年08月01日, 査読有り

  
• Enhanced mechanical properties in fully recrystallized ultrafine grained ZKX600 Mg alloy

  Ruixiao Zheng; Tilak Bhattacharjee; Si Gao; Wu Gong; Akinobu Shibata; Taisuke Sasaki; Kazuhiro Hono; Nobuhiro Tsuji

  IOP Conference Series: Materials Science and Engineering, 2017年08月01日, 査読有り

  この論文にアクセスする：

  
• Structural refinement and property optimization in an Fe-23Cr-8.5Ni duplex stainless steel

  L. Xie; T. L. Huang; Y. H. Wang; L. Zhang; G. L. Wu; N. Tsuji; X. Huang

  IOP Conference Series: Materials Science and Engineering, 2017年08月01日, 査読有り

  この論文にアクセスする：

  
• Role of Different Kinds of Boundaries Against Cleavage Crack Propagation in Low-Temperature Embrittlement of Low-Carbon Martensitic Steel

  Mizuki Tsuboi; Akinobu Shibata; Daisuke Terada; Nobuhiro Tsuji

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2017年07月01日, 査読有り

  
• Post-uniform elongation and tensile fracture mechanisms of Fe-18Mn-0.6C-xAl twinning-induced plasticity steels

  Ha Young Yu; Sang Min Lee; Jae Hoon Nam; Seung Joon Lee; Damien Fabrègue; Myeong heom Park; Nobuhiro Tsuji; Young Kook Lee

  Acta Materialia, 2017年06月01日, 査読有り

  
• Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing

  Shuhei Yoshida; Tilak Bhattacharjee; Yu Bai; Nobuhiro Tsuji

  Scripta Materialia, 2017年06月01日, 査読有り

  
• Characterization of microstructure and mechanical property of pure titanium with different Fe addition processed by severe plastic deformation and subsequent annealing

  Guanyu Deng; Tilak Bhattacharjee; Yan Chong; Ruixiao Zheng; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji

  IOP Conference Series: Materials Science and Engineering, 2017年05月08日

  
• Effect of severe cold-rolling and annealing on microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy

  I. S. Wani; T. Bhattacharjee; S. Sheikh; Y. Lu; S. Chatterjee; S. Guo; P. P. Bhattacharjee; N. Tsuji

  IOP Conference Series: Materials Science and Engineering, 2017年05月08日

  この論文にアクセスする：

  
• Change of deformation mechanisms in ultrafine grained Mg-Zn-Zr-Ca alloy

  Ruixiao Zheng; Tilak Bhattacharjee; Akinobu Shibata; Taisuke Sasaki; Kazuhiro Hono; Nobuhiro Tsuji

  IOP Conference Series: Materials Science and Engineering, 2017年05月08日

  この論文にアクセスする：

  
• Realizing Ultrafine Grained Steel by Simple Hot Deformation Using Dynamic Transformation and Subsequent Dynamic Recrystallization Mechanisms

  L. Zhao; N. Park; Y. Tian; A. Shibata; N. Tsuji

  IOP Conference Series: Materials Science and Engineering, 2017年05月08日, 査読有り

  この論文にアクセスする：

  
• Fracture surface topography analysis of the hydrogen-related fracture propagation process in martensitic steel

  Akinobu Shibata; Takahiro Matsuoka; Akira Ueno; Nobuhiro Tsuji

  International Journal of Fracture, 2017年05月01日, 査読有り

  
• Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy

  I. S. Wani; T. Bhattacharjee; S. Sheikh; I. T. Clark; M. H. Park; T. Okawa; S. Guo; P. P. Bhattacharjee; N. Tsuji

  Intermetallics, 2017年05月01日, 査読有り

  
• Cooperative strain accommodation over grains in martensitic transformation from Fe-Ni nanocrystalline austenite

  Akinobu Shibata; Fumitaka Ichikawa; Hiroki Adachi; Tohru Yamasaki; Nobuhiro Tsuji

  Philosophical Magazine Letters, 2017年04月, 査読有り

  
• A novel ultrafine-grained Fe–22Mn–0.6C TWIP steel with superior strength and ductility

  Y. Z. Tian; Y. Bai; L. J. Zhao; S. Gao; H. K. Yang; A. Shibata; Z. F. Zhang; N. Tsuji

  Materials Characterization, 2017年04月, 査読有り

  
• Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures

  Ruixiao Zheng; Tilak Bhattacharjee; Akinobu Shibata; Taisuke Sasaki; Kazuhiro Hono; Mohit Joshi; Nobuhiro Tsuji

  Scripta Materialia, 2017年04月, 査読有り

  
• Mechanism of Dynamic Formation of Ultrafine Ferrite Grains during High Temperature Processing in Steel

  Lijia Zhao; Nokeun Park; Yanzhong Tian; Akinobu Shibata; Nobuhiro Tsuji

  Advanced Engineering Materials, 2017年03月01日, 査読有り

  
• Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel

  Yuji Momotani; Akinobu Shibata; Daisuke Terada; Nobuhiro Tsuji

  International Journal of Hydrogen Energy, 2017年02月02日, 査読有り

  
• Novel thermomechanical processing methods for achieving ultragrain refinement of low-carbon steel without heavy plastic deformation

  Lijia Zhao; Nokeun Park; Yanzhong Tian; Shuai Chen; Akinobu Shibata; Nobuhiro Tsuji

  Materials Research Letters, 2017年01月02日, 査読有り

  
• 結晶粒超微細化が拓く鉄鋼材料の新しい可能性 (特集 鉄 : 宇宙・地球・生命・文化・未来)

  辻 伸泰

  ふぇらむ = Bulletin of the Iron and Steel Institute of Japan : (一社)日本鉄鋼協会会報, 2017年01月, 査読有り

  
• 超微細結晶粒金属材料の延性と加工性

  辻 伸泰

  塑性と加工, 2017年01月, 査読有り

  
• The phase stability of equiatomic CoCrFeMnNi high-entropy alloy: Comparison between experiment and calculation results

  Nokeun Park; Byeong Joo Lee; Nobuhiro Tsuji

  Journal of Alloys and Compounds, 2017年, 査読有り

  
• Ultimate rolling texture in pure aluminum highly deformed by accumulative roll bonding: Taylor orientation formed beyond grain subdivision

  Yoji Miyajima; Daisuke Kashioka; Nobuhiro Tsuji

  Materials Transactions, 2017年, 査読有り

  
• Mechanical properties of fine-grained and ultrafine-grained Ti-6Al-4V with equiaxed and bimodal microstructures

  Yan Chong; Nobuhiro Tsuji

  Materials Science Forum, 2017年, 査読有り

  
• Thermomechanical processing of medium manganese steels

  Atsushi Ito; Akinobu Shibata; Nobuhiro Tsuji

  Materials Science Forum, 2017年, 査読有り

  
• Combination of dynamic transformation and dynamic recrystallization for realizing ultrafine-grained steels with superior mechanical properties

  Lijia Zhao; Nokeun Park; Yanzhong Tian; Akinobu Shibata; Nobuhiro Tsuji

  Scientific Reports, 2016年12月14日, 査読有り

  この論文にアクセスする：

  
• Fatigue properties of ARB-processed Ti sheets with crystallographic texture

  Hiromoto Kitahara; Sho Matsushita; Masayuki Tsushida; Shinji Ando; Nobuhiro Tsuji

  International Journal of Fatigue, 2016年11月01日, 査読有り

  
• Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing

  I. S. Wani; T. Bhattacharjee; S. Sheikh; P. P. Bhattacharjee; S. Guo; N. Tsuji

  Materials Science and Engineering A, 2016年10月15日, 査読有り

  
• Microstructure and mechanical properties of dissimilar friction stir welding between ultrafine grained 1050 and 6061-T6 aluminum alloys

  Yufeng Sun; Nobuhiro Tsuji; Hidetoshi Fujii

  Metals, 2016年10月, 査読有り

  この論文にアクセスする：

  
• Revealing the deformation mechanisms of Cu–Al alloys with high strength and good ductility

  Y. Z. Tian; L. J. Zhao; N. Park; R. Liu; P. Zhang; Z. J. Zhang; A. Shibata; Z. F. Zhang; N. Tsuji

  Acta Materialia, 2016年05月15日, 査読有り

  
• Contactless electrical conductivity measurement of metallic submicron-grain material: Application to the study of aluminum with severe plastic deformation

  M. Mito; H. Matsui; T. Yoshida; T. Anami; K. Tsuruta; H. Deguchi; T. Iwamoto; D. Terada; Y. Miyajima; N. Tsuji

  Review of Scientific Instruments, 2016年05月01日, 査読有り

  
• Ductility Sensitivity to Stacking Fault Energy and Grain Size in Cu–Al Alloys

  Y. Z. Tian; A. Shibata; Z. Zhang; N. Tsuji

  MATERIALS RESEARCH LETTERS, 2016年01月22日, 査読有り

  
• Effect of grain refinement on hydrogen embrittlement behaviors of high-Mn TWIP steel

  Y. Bai; Y. Momotani; M. C. Chen; A. Shibata; N. Tsuji

  Materials Science and Engineering A, 2016年01月10日, 査読有り

  この論文にアクセスする：

  
• Ultrafine-Grained AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

  I. S. Wani; T. Bhattacharjee; S. Sheikh; Y. P. Lu; S. Chatterjee; P. P. Bhattacharjee; S. Guo; N. Tsuji

  MATERIALS RESEARCH LETTERS, 2016年, 査読有り

  
• Microstructure and mechanical properties of ARB processed aluminium with different purities

  Naoya Kamikawa; Nobuhiro Tsuji

  Materials Transactions, 2016年, 査読有り

  
• Special issue on advanced materials science in bulk nanostructured metals III

  Naoya Kamikawa; Tomohiro Tsuru; Nobuhiro Tsuji

  Materials Transactions, 2016年, 査読有り

  
• Grain subdivision mechanism related to partial disclinations in severe plastic deformation: A molecular dynamics study

  Tomotsugu Shimokawa; Tomoaki Yamashita; Tomoaki Niiyama; Nobuhiro Tsuji

  Materials Transactions, 2016年, 査読有り

  
• Effect of accumulative roll bonding (ARB) and subsequent aging on microstructure and mechanical properties of 2024 Al alloy

  Ruixiao Zheng; Tilak Bhattacharjee; Akinobu Shibata; Nobuhiro Tsuji; Chaoli Ma

  Materials Transactions, 2016年, 査読有り

  
• Preface

  Naoya Kamikawa; Tomohiro Tsuru; Nobuhiro Tsuji

  Materials Transactions, 2016年

  
• Effect of imposed strain and annealing temperature on uniform elongation in A5052 alloy processed by accumulative roll bonding

  Keizo Kashihara; Yoshikazu Komi; Nobuhiro Tsuji

  MECHANICAL ENGINEERING JOURNAL, 2016年

  
• Effect of precipitate on microstructure evolution and hardness of Al-Cu alloy during torsion deformation

  Sunisa Khamsuk; Nokeun Park; Daisuke Terada; Nobuhiro Tsuji

  Materials Science Forum, 2016年, 査読有り

  
• Effect of Grain Size on Mechanical Properties of Dual Phase Steels Composed of Ferrite and Martensite

  Myeong Heom Park; Akinobu Shibata; Nobuhiro Tsuji

  MRS Advances, 2016年, 査読有り

  
• Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes

  Y. Z. Tian; L. J. Zhao; S. Chen; A. Shibata; Z. F. Zhang; N. Tsuji

  Scientific Reports, 2015年11月19日, 査読有り

  この論文にアクセスする：

  
• Microstructure and Mechanical Properties of Co21Cr22Cu22Fe21Ni14 Processed by High Pressure Torsion and Annealing

  Nokeun Park; Xiang Li; Nobuhiro Tsuji

  JOM, 2015年10月23日, 査読有り

  
• Characterization of Hydrogen-Related Fracture Behavior in As-Quenched Low-Carbon Martensitic Steel and Tempered Medium-Carbon Martensitic Steel

  Akinobu Shibata; Tamotsu Murata; Hiroshi Takahashi; Takahiro Matsuoka; Nobuhiro Tsuji

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2015年09月30日, 査読有り

  
• Grain refinement of 2Mn-0.1C steel by repetitive heat treatment and recrystallization

  M. H. Park; A. Shibata; N. Tsuji

  IOP Conference Series: Materials Science and Engineering, 2015年08月07日, 査読有り

  
• Microstructural evolution of Ti-added interstitial free steel in high strain deformation by hot torsion

  R. Gholizadeh; A. Shibata; D. Terada; N. Tsuji

  IOP Conference Series: Materials Science and Engineering, 2015年08月07日, 査読有り

  
• Erratum to: Recrystallization Behavior of CoCrCuFeNi High-Entropy Alloy

  Nokeun Park; Ikuto Watanabe; Daisuke Terada; Yoshihiko Yokoyama; Peter K. Liaw; Nobuhiro Tsuji

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2015年07月26日, 査読有り

  
• Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium

  Yoji Miyajima; Shin Ya Komatsu; Masatoshi Mitsuhara; Satoshi Hata; Hideharu Nakashima; Nobuhiro Tsuji

  Philosophical Magazine, 2015年04月, 査読有り

  
• Ultrafine ferrite formation through cold-rolling and annealing of low-carbon dual-phase steel

  Y. Okitsu; N. Takata; N. Tsuji

  Materials Science and Technology (United Kingdom), 2015年04月, 査読有り

  
• Recrystallization Behavior of CoCrCuFeNi High-Entropy Alloy

  Nokeun Park; Ikuto Watanabe; Daisuke Terada; Yoshihiko Yokoyama; Peter K. Liaw; Nobuhiro Tsuji

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2015年, 査読有り

  
• Improvement of uniform elongation by low temperature annealing in Al-2.5%Mg alloy processed by accumulative roll bonding

  Keizo Kashihara; Yoshikazu Komi; Daisuke Terada; Nobuhiro Tsuji

  Materials Transactions, 2015年, 査読有り

  
• Relationship between local stress field in austenite and variant selection in deformation-induced martensitic transformation in Fe-24Ni-0.3C alloy

  A. Matsumoto; M. Chen; A. Shibata; T. Miyazawa; M. Sato; N. Tsuji

  Materials Today: Proceedings, 2015年, 査読有り

  この論文にアクセスする：

  
• Crystallographic Characterization of Cleavage Plane in Low-carbon Martensitic Steel

  M. Tsuboi; A. Shibata; D. Terada; N. Tsuji

  Materials Today: Proceedings, 2015年, 査読有り

  
• Influence of Tempering on Mechanical Properties of Ferrite and Martensite Dual Phase Steel

  H. Li; S. Gao; Y. Tian; D. Terada; A. Shibata; N. Tsuji

  Materials Today: Proceedings, 2015年, 査読有り

  
• Local stress evaluation during deformation in SUS304 austenitic stainless steel

  M. Chen; A. Matsumoto; A. Shibata; D. Terada; T. Miyazawa; M. Sato; H. Adachi; N. Tsuji

  Materials Today: Proceedings, 2015年, 査読有り

  
• Evaluation of dislocation density for 1100 aluminum with different grain size during tensile deformation by using in-situ X-ray diffraction technique

  Hiroki Adachi; Yoji Miyajima; Masugu Sato; Nobuhiro Tsuji

  Materials Transactions, 2015年, 査読有り

  
• Hydrogen Embrittlement Behavior at Different Strain Rates in Low-carbon Martensitic Steel

  Y. Momotani; A. Shibata; D. Terada; N. Tsuji

  Materials Today: Proceedings, 2015年, 査読有り

  
• Yielding behavior and its effect on uniform elongation in if steel with various grain sizes

  Si Gao; Meichuan Chen; Mohit Joshi; Akinobu Shibata; Nobuhiro Tsuji

  Journal of Materials Science, 2014年10月, 査読有り

  
• Optimizing strength and ductility in Cu-Al alloy with recrystallized nanostructures formed by simple cold rolling and annealing

  Y. Z. Tian; L. J. Zhao; S. Chen; D. Terada; A. Shibata; N. Tsuji

  Journal of Materials Science, 2014年10月, 査読有り

  
• Dynamic ferrite transformation behaviors in 6Ni-0.1C steel

  Nokeun Park; Lijia Zhao; Akinobu Shibata; Nobuhiro Tsuji

  JOM, 2014年05月01日, 査読有り

  
• Effect of ferrite grain size on dynamic tensile properties of ultrafine grained low carbon steels with various chemical compositions

  Yoshitaka Okitsu; Nobuhiro Tsuji

  Materials Transactions, 2014年, 査読有り

  
• Yielding behavior and its effect on uniform elongation of fine grained if steel

  Si Gao; Meichuan Chen; Shuai Chen; Naoya Kamikawa; Akinobu Shibata; Nobuhiro Tsuji

  Materials Transactions, 2014年, 査読有り

  
• Correlation between continuous/discontinuous yielding and hallpetch slope in high purity iron

  Si Gao; Akinobu Shibata; Meichuan Chen; Nokeun Park; Nobuhiro Tsuji

  Materials Transactions, 2014年, 査読有り

  
• Formation of fully annealed nanocrystalline austenite in FeNiC alloy

  Shuai Chen; Akinobu Shibata; Si Gao; Nobuhiro Tsuji

  Materials Transactions, 2014年, 査読有り

  
• {001}〈100〉アルミニウム単結晶の繰返し重ね接合圧延におけるDillamore方位の形成

  樫原 恵蔵; 寺田 大将; 辻 伸泰

  軽金属, 2014年01月, 査読有り

  
• Mechanical properties of bulk ultrafine grained aluminum fabricated by torsion deformation at various temperatures and strain rates

  Sunisa Khamsuk; Nokeun Park; Si Gao; Daisuke Terada; Hiroki Adachi; Nobuhiro Tsuji

  Materials Transactions, 2014年, 査読有り

  
• {001}〈100〉アルミニウム単結晶の繰返し重ね接合圧延におけるDillamore方位の形成

  樫原 恵蔵; 寺田 大将; 辻 伸泰

  軽金属, 2014年01月01日, 査読有り

  
• 結晶粒径の異なる1100アルミニウムにおけるIn-situ X線回折法を用いた引張変形中の転位密度測定

  足立 大樹; 宮嶋 陽司; 佐藤 眞直; 辻 伸泰

  軽金属, 2014年01月, 査読有り

  
• 鋼の加工熱処理の変遷と今後の動向

  牧 正志; 古原 忠; 辻 伸泰; 森戸 茂一; 宮本 吾郎; 柴田 曉伸

  ふぇらむ, 2014年, 査読有り

  
• Aging behavior of ultra-fine grained al0.5% si0.5% ge alloy fabricated by arb process

  Keiyu Nakagawa; Nobuhiro Tsuji; Daisuke Terada; Toshihiko Nakano; Khairul Nizam; Teruto Kanadani

  Materials Transactions, 2014年, 査読有り

  
• Enhanced Strength and Ductility in an Ultrafine-Grained Fe-22Mn-0.6C Austenitic Steel Having Fully Recrystallized Structure

  Y. Z. Tian; Y. Bai; M. C. Chen; A. Shibata; D. Terada; N. Tsuji

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2014年, 査読有り

  
• Stability of {4 4 11} 〈11 11 8〉 orientation in a {123} 〈634〉 aluminum single crystal processed by accumulative roll bonding

  Keizo Kashihara; Yoshikazu Komi; Daisuke Terada; Nobuhiro Tsuji

  Materials Transactions, 2014年, 査読有り

  
• Microstructures and mechanical properties of an artificially-aged Al-Mg-Ga alloy

  Myeong Heom Park; Daisuke Terada; Manuel Marya; Nobuhiro Tsuji

  Materials Science Forum, 2014年, 査読有り

  
• Fabrication of fine recrystallized grains and their mechanical property in HPT processed pure magnesium

  Mohit Joshi; Yuko Fukuta; Si Gao; Nokeun Park; Daisuke Terada; Nobuhiro Tsuji

  IOP Conference Series: Materials Science and Engineering, 2014年, 査読有り

  
• Mechanical properties and aging behavior of ultrafine grained Al-Ag alloy fabricated by accumulative roll-bonding

  Tadashige Nagae; Nobuhiro Tsuji; Daisuke Terada

  Materials Science Forum, 2014年, 査読有り

  
• Improvement of mechanical properties by two-step aging in ultrafine grained Al-Ag-Sc alloy

  Daisuke Terada; Yan Zeng; Nobuhiro Tsuji

  Materials Science Forum, 2014年, 査読有り

  
• Microstructural evolution of metastable austenitic steel during high-pressure torsion and subsequent heat treatment

  S. Chen; A. Shibata; L. J. Zhao; S. Gao; Y. Z. Tian; N. Tsuji

  IOP Conference Series: Materials Science and Engineering, 2014年, 査読有り

  
• Strain hardening behavior of Cu-Al alloy with a low stacking fault energy

  Y.Z. Tian; S. Chen; L.J. Zhao; D. Terada; A. Shibata; N. Tsuji

  Proceedings of 35th Risø International Symposium on Materials Science, 2014年, 査読有り

  
• Tensile behavior of ultrafine-grained metastable austenite in Fe-24Ni-0.3C alloy

  S. Chen; L. Zhao; M. Chen; Y. Tian; S. Gao; A. Shibata; N. Tsuji

  Proceedings of 35th Risø International Symposium on Materials Science, Roskilde, 2014年, 査読有り

  
• Yielding behavior of ultrafine grained IF steel and its effect on hall-petch relation

  S. Gao; M. Chen; N. Kamikawa; A. Shibata; N. Tsuji

  Proceedings of 35th Risø International Symposium on Materials Science, 2014年, 査読有り

  
• Crystallographic analysis of hydrogen-related fracture in martensitic steels

  A. Shibata; T. Murata; T. Matsuoka; N. Tsuji

  Proceedings of 35th Risø International Symposium on Materials Science, 2014年, 査読有り

  
• Nanostructured ferrite formation in low-carbon steel through thermos-mechanical controlled processing

  L.J. Zhao; N. Park; S. Chen; Y.Z. Tian; A. Shibata; N. Tsuji

  Proceedings of 35th Risø International Symposium on Materials Science, 2014年, 査読有り

  
• Evaluation of dislocation density for 1100 aluminum with different grain size during tensile deformation by using In-situ X-ray diffraction technique

  Hiroki Adachi; Yoji Miyajima; Masugu Sato; Nobuhiro Tsuji

  Keikinzoku/Journal of Japan Institute of Light Metals, 2014年, 査読有り

  
• Mechanical properties and microstructure of 6061 aluminum alloy severely deformed by ARB process and subsequently aged at low temperatures

  Daisuke Terada; Yoma Kaneda; Zenji Horita; Kenji Matsuda; Shoichi Hirosawa; Nobuhiro Tsuji

  IOP Conference Series: Materials Science and Engineering, 2014年, 査読有り

  
• Microstructure and mechanical properties of spot friction stir welded ultrafine grained 1050 Al and conventional grained 6061-T6 Al alloys

  Y. F. Sun; H. Fujii; N. Tsuji

  Materials Science and Engineering A, 2013年11月15日, 査読有り

  
• Variant selection of martensite transformation from ultrafine-grained austenite in Fe-Ni-C alloy

  Hamidreza Jafarian; Ehsan Borhani; Akinobu Shibata; Nobuhiro Tsuji

  Journal of Alloys and Compounds, 2013年11月15日, 査読有り

  
• Fully recrystallized nanostructure fabricated without severe plastic deformation in high-Mn austenitic steel

  Rajib Saha; Rintaro Ueji; Nobuhiro Tsuji

  Scripta Materialia, 2013年05月, 査読有り

  
• Occurrence of dynamic ferrite transformation in low-carbon steel above Ae3

  Nokeun Park; Sunisa Khamsuk; Akinobu Shibata; Nobuhiro Tsuji

  Scripta Materialia, 2013年04月, 査読有り

  
• Effect of austenite grain size on kinetics of dynamic ferrite transformation in low carbon steel

  N. Park; S. Khamsuk; A. Shibata; N. Tsuji

  Scripta Materialia, 2013年04月, 査読有り

  
• Enhancement in strength of a Cu-1.4 mass%Ni-0.25 mass%P-0.1 mass%Zr alloy by cryo-rolling and aging

  Y. Tsujiuchi; K. Kita; C. Watanabe; R. Monzen; N. Tsuji

  Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 2013年02月, 査読有り

  
• Texture evolution in {112} <111> aluminum single crystals processed by severe plastic deformation

  Keizo Kashihara; Yoshitaka Tsujimoto; Daisuke Terada; Nobuhiro Tsuji

  Materials Characterization, 2013年01月, 査読有り

  
• Flow stress analysis for determining the critical condition of dynamic ferrite transformation in 6Ni-0.1C steel

  Nokeun Park; Akinobu Shibata; Daisuke Terada; Nobuhiro Tsuji

  Acta Materialia, 2013年01月, 査読有り

  
• 極低温圧延と時効によるCu-1.4 mass%Ni-0.25 mass%P-0.1 mass%Zr合金の強度向上

  辻内 喜成; 北 和久; 渡邊 千尋; 門前 亮一; 辻 伸泰

  日本金屬學會誌, 2013年01月, 査読有り

  
• Nanocrystalline twinning induced plasticity steel with superior mechanical properties fabricated by cold rolling and annealing

  Rajib Saha; Rintaro Ueji; Nobuhiro Tsuji

  Materials Science Forum, 2013年, 査読有り

  
• Special issue on advanced materials science in bulk nanostructured metals ii

  Masaki Tanaka; Naoya Kamikawa; Nobuhiro Tsuji

  Materials Transactions, 2013年, 査読有り

  
• Dynamic softening of flow stress during dynamic ferrite transformation

  Nokeun Park; Sunisa Khamsuk; Akinobu Shibata; Nobuhiro Tsuji

  Materials Science Forum, 2013年, 査読有り

  
• Enhancement in Strength of a Cu-1.4 mass%Ni-0.25 mass%P-0.1 mass%Zr Alloy by Cryo-Rolling and Aging

  Y. Tsujiuchi; K. Kita; C. Watanabe; R. Monzen; N. Tsuji

  JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2013年, 査読有り

  
• Cross-sectional distributions of mechanical properties of fine cusn alloy wire manufactured by continuous rotary draw bending

  Junichiro Tokutomi; Kenichi Hanazaki; Nobuhiro Tsuji; Jun Yanagimoto

  Materials Transactions, 2013年, 査読有り

  
• Microstructures of pearlite and martensite transformed from ultrafine-grained austenite fabricated through cyclic heat treatment in medium carbon steels

  Akinobu Shibata; Shohei Daido; Daisuke Terada; Nobuhiro Tsuji

  Materials Transactions, 2013年, 査読有り

  
• Improvement in mechanical properties of a Cu-2.0 mass%Ni-0.5 mass%Si-0.1 mass%Zr alloy by combining both accumulative roll-bonding and cryo-rolling with aging

  Yusaku Takagawa; Yukinaru Tsujiuchi; Chihiro Watanabe; Ryoichi Monzen; Nobuhiro Tsuji

  Materials Transactions, 2013年, 査読有り

  
• Identical area observations of deformation-induced martensitic transformation in SUS304 austenitic stainless steel

  Meichuan Chen; Daisuke Terada; Akinobu Shibata; Nobuhiro Tsuji

  Materials Transactions, 2013年, 査読有り

  
• Recrystallization texture of heavily cold rolled polycrystalline nickel sheets with and without strong starting cube texture

  Pinaki Prasad Bhattacharjee; Yoshihiro Takatsuji; Yoji Miyajima; Daisuke Terada; Nobuhiro Tsuji

  Materials Science Forum, 2013年, 査読有り

  
• Evolution of ultrafine microstructures in commercial purity aluminum heavily deformed by torsion

  Sunisa Khamsuk; Nokeun Park; Hiroki Adachi; Daisuke Terada; Nobuhiro Tsuji

  Journal of Materials Science, 2012年11月, 査読有り

  
• Change in mechanical properties of fine copper wire manufactured by continuous rotary draw bending process

  Junichiro Tokutomi; Kenichi Hanazaki; Nobuhiro Tsuji; Jun Yanagimoto

  Journal of Materials Processing Technology, 2012年11月, 査読有り

  
• 極低温圧延またはARB加工と時効析出によるCu-1.4mass%Ni-O.25mass%P-0.1 mass%Zr合金の強度向上

  高川優作; 辻内喜成; 渡邊千尋; 門前亮一; 辻伸泰

  銅と銅合金, 2012年08月

  
• Evolution of microstructure and texture during cold rolling and annealing of a highly cube-textured ({001}(100)) polycrystalline nickel sheet

  P. P. Bhattacharjee; Y. Takatsuji; Y. Miyajima; D. Terada; N. Tsuji

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2012年07月, 査読有り

  
• High pressure torsion to refine grains in pure aluminum up to saturation: Mechanisms of structure evolution and their dependence on strain

  Dmitry Orlov; Naoya Kamikawa; Nobuhiro Tsuji

  Philosophical Magazine, 2012年06月21日, 査読有り

  
• Effect of SiC particles on the microstructure evolution and mechanical properties of aluminum during ARB process

  M. Alizadeh; M. H. Paydar; D. Terada; N. Tsuji

  Materials Science and Engineering A, 2012年04月, 査読有り

  
• Nanostructured steel for automotive body structures

  Y. Okitsu; N. Tsuji

  Advanced Materials in Automotive Engineering, 2012年02月21日, 査読有り

  
• Significant change in mechanical properties of deep drawn ultrafine grained copper wire by additional deformation

  Kenichi Hanazaki; Jun ichiro Tokutomi; Jun Yanagimoto; Nobuhiro Tsuji

  Materials Science and Engineering A, 2012年02月01日, 査読有り

  
• Microstructure and crystallographic features of martensite transformed from ultrafine-grained austenite in Fe24Ni-0.3C alloy

  Akinobu Shibata; Hamidreza Jafarian; Nobuhiro Tsuji

  Materials Transactions, 2012年, 査読有り

  
• Changes in mechanical characteristics of pre-annealed wires of Cu-Sn alloy manufactured by continuous draw bending

  Junichiro Tokutomi; Kenichi Hanazaki; Nobuhiro Tsuji; Jun Yanagimoto

  Materials Transactions, 2012年, 査読有り

  
• 普通炭素鋼の組織と基礎特性

  辻 伸泰

  塑性と加工, 2012年01月, 査読有り

  
• アルミニウムの巨大ひずみ加工に伴う超微細粒組織の形成機構 (特集号 超微細粒がもたらす軽金属材料の新しい可能性)

  辻 伸泰

  軽金属, 2012年01月, 査読有り

  
• ARB加工により作製された超微細粒Al-0.5%Si-0.5%Ge合金の時効挙動 (特集号 超微細粒がもたらす軽金属材料の新しい可能性)

  中川 惠友; 辻 伸泰; 寺田 大将

  軽金属, 2012年01月, 査読有り

  
• ARB加工により作製された超微細粒Al-0.5%Si-0.5%Ge合金の時効挙動

  中川 惠友; 辻 伸泰; 寺田 大将; 中野 聡彦; ニザム カイリル; 金谷 輝人

  軽金属, 2012年, 査読有り

  
• アルミニウムの巨大ひずみ加工に伴う超微細粒組織の形成機構

  辻 伸泰

  軽金属, 2012年01月

  
• Effect of deformation temperature on microstructure evolution in ARB processed ultralow carbon IF steel

  Naoya Kamikawa; Nobuhiro Tsuji

  Materials Transactions, 2012年, 査読有り

  
• Microstructural Evolution during ARE Process of Al-0.2 mass% Sc Alloy Containing Al3Sc Precipitates in Starting Structures

  Ehsan Borhani; Hamidreza Jafarian; Daisuke Terada; Hiroki Adachi; Nobuhiro Tsuji

  MATERIALS TRANSACTIONS, 2012年01月, 査読有り

  
• PREFACE Special Issue on Advanced Materials Science in Bulk Nanostructured Metals

  Naoya Kamikawa; Yoshiteru Aoyagi; Nobuhiro Tsuji

  MATERIALS TRANSACTIONS, 2012年01月, 査読有り

  
• Comparative analysis of plastic flow and grain refinement in pure aluminium subjected to simple shear-based severe plastic deformation processing

  Dmitry Orlov; Yoshikazu Todaka; Minoru Umemoto; Yan Beygelzimer; Nobuhiro Tsuji

  Materials Transactions, 2012年, 査読有り

  
• Texture evolution in Al-0.2 mass%Sc alloy during ARB process and subsequent annealing

  Ehsan Borhani; Hamidreza Jafarian; Akinobu Shibata; Nobuhiro Tsuji

  Materials Transactions, 2012年, 査読有り

  
• Microstructural evolution during ARB process of Al-0.2 mass% Sc alloy containing Al 3Sc precipitates in starting structures

  Ehsan Borhani; Hamidreza Jafarian; Daisuke Terada; Hiroki Adachi; Nobuhiro Tsuji

  Materials Transactions, 2012年, 査読有り

  
• Comparative Analysis of Plastic Flow and Grain Refinement in Pure Aluminium Subjected to Simple Shear-Based Severe Plastic Deformation Processing

  Dmitry Orlov; Yoshikazu Todaka; Minoru Umemoto; Yan Beygelzimer; Nobuhiro Tsuji

  MATERIALS TRANSACTIONS, 2012年01月, 査読有り

  
• Characterization of defects in severely deformed iron by mechanical spectroscopy

  T. Akaki; H. Morimoto; H. Numakura; D. Terada; N. Tsuji

  Solid State Phenomena, 2012年, 査読有り

  
• Crystallographic features of martensite transformed from ultrafine grained austenite fabricated by severe plastic deformation

  Akinobu Shibata; Hamidreza Jafarian; Daisuke Terada; Nobuhiro Tsuji

  Materials Science Forum, 2012年, 査読有り

  
• Texture evolution in ARB processed commercial purity aluminium

  Yoji Miyajima; Daisuke Kashioka; Nobuhiro Tsuji

  Materials Science Forum, 2012年, 査読有り

  
• Stability of Cube Oriented Grains during Cold-Rolling of Highly Cube-Oriented Polycrystalline Nickel”

  Nobuhiro Tsuji; Yoshihiro Takatsuji; Yoji Miyajima; Pinaki Prasad Bhattacharjee; Daisuke Terada

  Mater. Sci. Forum, 2012年, 査読有り

  
• Effect of ultrahigh straining on the evolution of cube texture ({100}<100>) in high purity nickel

  P. P. Bhattacharjee; N. Tsuji

  Materials Science Forum, 2012年, 査読有り

  
• Microstructural and crystallographic features of hydrogenrelated crack propagation in low carbon martensitic steel

  Akinobu Shibata; Hiroshi Takahashi; Nobuhiro Tsuji

  ISIJ International, 2012年, 査読有り

  
• Stability of Cube Oriented Grains during Cold-Rolling of Highly Cube-Oriented Polycrystalline Nickel

  Nobuhiro Tsuji; Yoshihiro Takatsuji; Yoji Miyajima; Pinaki Prasad Bhattacharjee; Daisuke Terada

  TEXTURES OF MATERIALS, PTS 1 AND 2, 2012年, 査読有り

  
• Formation mechanism of ultrafine grained microstructures during severe plastic deformation of aluminum

  Nobuhiro Tsuji

  Keikinzoku/Journal of Japan Institute of Light Metals, 2012年

  
• Preface

  Naoya Kamikawa; Yoshiteru Aoyagi; Nobuhiro Tsuji

  Materials Transactions, 2012年, 査読有り

  
• YIELDING BEHAVIOR AND HALL-PETCH COEFFICIENT IN HIGH PURITY IRON

  Si Gao; Akinobu Shibata; Nobuhiro Tsuji

  NANOMETALS - STATUS AND PERSPECTIVE, 2012年, 査読有り

  
• Development of Cube Texture in Pure Ni Following Ultrahigh Straining by Accumulative Roll Bonding and Annealing

  P. P. Bhattacharjee; N. Tsuji

  RECRYSTALLIZATION AND GRAIN GROWTH IV, 2012年, 査読有り

  
• Systematic approach to clarify the mechanism of dynamic transformation in Fe-6Ni-0.1C alloy

  Nokeun Park; Akinobu Shibata; Nobuhiro Tsuji

  Advanced Materials Research, 2012年, 査読有り

  
• Effect of microstructure of martensite on hydrogen embrittlement in 8Ni-0.1C steel

  T. Matsuoka; A. Shibata; N. Tsuji

  Proceedings of the 2012 International Hydrogen Conference, 2012年, 査読有り

  
• Crystallographic analysis of hydrogen-related fracture in medium carbon martensitic steel

  A. Shibata; T. Murata; N. Tsuji

  Proceedings of the 2012 International Hydrogen Conference, 2012年, 査読有り

  
• Relationship between hydrogen-related crack propagation and microstructure of martensite in low carbon martensitic steel

  A. Shibata; H. Takahashi; N. Tsuji

  Proceedings of the 3rd International Symposium on Steel Science (IS3-2012), 2012年, 査読有り

  
• The effects of Mo and starting precipitate distribution on (Nb,Ti)(C,N) precipitate size evolution in a high-temperature carburizing steel

  C.M. Enloe; K.O. Findley; J.G. Speer; A. Shibata; D. Terada; N. Tsuji

  Proceedings of the 3rd International Symposium on Steel Science (IS3-2012), 2012年, 査読有り

  
• Dislocation Density Changes in Ultrafine-grain Aluminum during Tensile Deformation

  Hiroki Adachi; Yoji Miyajima; Akinobu Shibata; Daisuke Terada; Nobuhiro Tsuji

  PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13), 2012年, 査読有り

  
• Cu-Ni-P系合金の析出強化特性に及ばすARB法および冷間圧延法の影響

  野村 幸矢; 三輪 洋介; 高川 優作; 渡邊 千尋; 門前 亮一; 寺田 大将; 辻 伸泰

  日本金屬學會誌, 2011年09月, 査読有り

  この論文にアクセスする：

  
• Effect of initial microstructure on ultrafine grain formation through warm deformation in medium-carbon steels

  Kazukuni Hase; Nobuhiro Tsuji

  Scripta Materialia, 2011年09月, 査読有り

  
• Effect of initial grain size on the evolution of {001}<001> texture in severely deformed and annealed high-purity nickel

  P. P. Bhattacharjee; N. Tsuji; R. K. Ray

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2011年09月, 査読有り

  
• Effect of initial microstructure on ultrafine grain formation through warm deformation in medium-carbon steels

  Kazukuni Hase; Nobuhiro Tsuji

  SCRIPTA MATERIALIA, 2011年09月, 査読有り

  
• Critical strain for mechanical alloying of Cu-Ag, Cu-Ni and Cu-Zr by high-pressure torsion

  Y. F. Sun; H. Fujii; T. Nakamura; N. Tsuji; D. Todaka; M. Umemoto

  Scripta Materialia, 2011年09月, 査読有り

  
• Influence of Accumulative Roll Bonding and Cold Rolling Processes on the Precipitation Strengthening Properties for Cu-Ni-P Alloy

  K. Nomura; Y. Miwa; Y. Takagawa; C. Watanabe; R. Monzen; D. Terada; N. Tsuji

  JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2011年09月, 査読有り

  この論文にアクセスする：

  
• Formability of ultrafine-grained interstitial-free steel fabricated by accumulative roll-bonding and subsequent annealing

  Rika Yoda; Kosuke Shibata; Takatoshi Morimitsu; Daisuke Terada; Nobuhiro Tsuji

  Scripta Materialia, 2011年08月, 査読有り

  
• Effects of Si addition on mechanical properties of copper severely deformed by accumulative roll-bonding

  Takahiro Kunimine; Toshiyuki Fujii; Susumu Onaka; Nobuhiro Tsuji; Masaharu Kato

  Journal of Materials Science, 2011年06月, 査読有り

  
• Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion

  Tatsuya Miyazaki; Daisuke Terada; Yoji Miyajima; Challapalli Suryanarayana; Reiko Murao; Yoshihiko Yokoyama; Kazumasa Sugiyama; Minoru Umemoto; Yoshikazu Todaka; Nobuhiro Tsuji

  Journal of Materials Science, 2011年06月, 査読有り

  
• Martensite/austenite interfaces in ultrafine grained Fe-Ni-C alloy

  H. R. Jafarian; E. Borhani; A. Shibata; D. Terada; N. Tsuji

  Journal of Materials Science, 2011年06月, 査読有り

  
• Dynamic deformation behavior of ultrafine-grained iron produced by ultrahigh strain deformation and annealing

  Yoshitaka Okitsu; Naoki Takata; Nobuhiro Tsuji

  SCRIPTA MATERIALIA, 2011年05月, 査読有り

  
• Dynamic deformation behavior of ultrafine-grained iron produced by ultrahigh strain deformation and annealing

  Yoshitaka Okitsu; Naoki Takata; Nobuhiro Tsuji

  Scripta Materialia, 2011年05月, 査読有り

  
• Change in crystal orientations of a {100} 〈001〉 pure aluminum single crystal during accumulative roll bonding

  K. Kashihara; W. Ikushima; Y. Miyajima; D. Terada; N. Tsuji

  Materials Transactions, 2011年05月, 査読有り

  この論文にアクセスする：

  
• Formation of bimodal grain structures in high purity Al by reversal high pressure torsion

  Dmitry Orlov; Yoshikazu Todaka; Minoru Umemoto; Nobuhiro Tsuji

  Scripta Materialia, 2011年03月, 査読有り

  
• Bulk nanostructured metals and alloys produced by accumulative roll-bonding

  N. Tsuji

  Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications, 2011年03月

  
• Applying nanostructured steel sheets to automotive body structures

  Y. Okitsu; N. Tsuji

  Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications, 2011年03月, 査読有り

  
• Continuous bending-drawing process to manufacture the ultrafine copper wire with excellent electrical and mechanical properties

  Jun Yanagimoto; Junichiro Tokutomi; Kenichi Hanazaki; Nobuhiro Tsuji

  CIRP Annals - Manufacturing Technology, 2011年, 査読有り

  
• Development of highly cube textured nickel superconductor substrate tapes by accumulative roll bonding (ARB)

  Pinaki P. Bhattacharjee; Nobuhiro Tsuji

  International Journal of Materials Research, 2011年, 査読有り

  
• Effect of aging treatment on ultra-fine grains and Si-phase in Al-0.5%Si alloy fabricated by ARB process

  Keiyu Nakagawa; Teruto Kanadani; Nobuhiro Tsuji; Daisuke Terada; Toshiaki Masui; Yasuhiko Sato

  Materials Transactions, 2011年, 査読有り

  この論文にアクセスする：

  
• Annealing behavior of solution treated and aged Al-0.2wt% Sc deformed by ARB

  Ehsan Borhani; Hamidreza Jafarian; Hiroki Adachi; Daisuke Terada; Nobuhiro Tsuji

  Materials Science Forum, 2011年, 査読有り

  
• High-temperature severe plastic deformation of ferritic steel by torsion

  Aries Setiawan; Daisuke Terada; Nobuhiro Tsuji

  Materials Science Forum, 2011年, 査読有り

  
• Martensitic transformation from ultrafine grained austenite fabricated by ARB in Fe-24Ni-0.3C

  Hamidreza Jafarian; Ehsan Borhani; Akinobu Shibata; Daisuke Terada; Nobuhiro Tsuji

  Materials Science Forum, 2011年, 査読有り

  
• Mechanical properties of precipitation strengthening Cu-base alloys highly deformed by ARB process

  R. Monzen; Y. Takagawa; C. Watanabe; D. Terada; N. Tsuji

  Procedia Engineering, 2011年, 査読有り

  
• ARB法により強ひずみ加工した析出強化型Cu-Ni-P-Zr合金の機械的特性

  野村幸矢; 三輪 洋介; 高川 優作; 渡邉千尋; 門前 亮一; 寺田 大将; 辻 伸泰

  日本金屬學會誌, 2011年, 査読有り

  
• ARB法により強ひずみ加工した析出強化型Cu基合金の機械的特性

  高川 優作; 渡邉千尋; 門前 亮一; 寺田 大将; 辻 伸泰

  銅と銅合金, 2011年, 査読有り

  
• Development of textured coated superconductor substrate tapes by severe plastic deformation processing

  P. P. Bhattacharjee; N. Tsuji

  Materials Science Forum, 2011年, 査読有り

  
• Two concepts to improve crash worthiness of hat columns by applying ultrafine grained steel sheets

  Yoshitaka Okitsu; Tadashi Naito; Nobuhiro Tsuji

  Automobiles: Performance, Safety Assessment, and Energy Consumption, 2011年01月

  
• Ways to Manage Both Strength and Ductility in Nanostructured Steels

  Nobuhiro Tsuji

  ADVANCED STEELS: THE RECENT SCENARIO IN STEEL SCIENCE AND TECHNOLOGY, 2011年

  
• Quantification of internal dislocation density using scanning transmission electron microscopy in ultrafine grained pure aluminium fabricated by severe plastic deformation

  Yoji Miyajima; Masatoshi Mitsuhara; Satoshi Hata; Hideharu Nakashima; Nobuhiro Tsuji

  Materials Science and Engineering A, 2010年12月15日

  
• Processing of nanostructured metals and alloys via plastic deformation

  Yuntian Zhu; Ruslan Z. Valiev; Terence G. Langdon; Nobuhiro Tsuji; Ke Lu

  MRS Bulletin, 2010年12月

  
• Evolution of deformation and recrystallization textures in high-purity Ni and the Ni-5 at. pct W alloy

  Pinaki P. Bhattacharjee; Ranjit K. Ray; Nobuhiro Tsuji

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2010年11月, 査読有り

  
• Change in electrical resistivity of commercial purity aluminium severely plastic deformed

  Yoji Miyajima; Shin Ya Komatsu; Masatoshi Mitsuhara; Satoshi Hata; Hideharu Nakashima; Nobuhiro Tsuji

  Philosophical Magazine, 2010年11月

  
• Plastic deformation and creep damage evaluations of type 316 austenitic stainless steels by EBSD

  Rika Yoda; Toshinori Yokomaku; Nobuhiro Tsuji

  Materials Characterization, 2010年10月, 査読有り

  
• Preface to the special issue on ultrafine grained materials

  Yuntian T. Zhu; Suveen N. Mathaudhu; Mathias Göken; Terence G. Langdon; Terry C. Lowe; S. Lee Semiatin; Nobuhiro Tsuji; Yong Hao Zhao

  Journal of Materials Science, 2010年09月

  
• Cu/Zr nanoscaled multi-stacks fabricated by accumulative roll bonding

  Y. F. Sun; N. Tsuji; H. Fujii; F. S. Li

  Journal of Alloys and Compounds, 2010年08月

  
• Change in microstructures and mechanical properties during deep wire drawing of copper

  Kenichi Hanazaki; Naoto Shigeiri; Nobuhiro Tsuji

  Materials Science and Engineering A, 2010年08月, 査読有り

  
• New routes for fabricating ultrafine-grained microstructures in bulky steels without very-high strains

  Nobuhiro Tsuji

  Advanced Engineering Materials, 2010年08月, 査読有り

  
• 巨大ひずみ加工により作製された超微細粒Al合金からの時効析出

  辻 伸泰; 寺田 大将; 中川 惠友; 金谷 輝人

  まてりあ : 日本金属学会会報, 2010年07月

  この論文にアクセスする：

  
• Friction stir welding of high carbon steel with excellent toughness and ductility

  Y. D. Chung; H. Fujii; R. Ueji; N. Tsuji

  Scripta Materialia, 2010年07月

  
• FE‐SEM/EBSP法による鋼のマルテンサイトの結晶学的解析

  北原弘基; 辻伸泰

  熱処理, 2010年06月28日, 査読有り

  
• 巨大ひずみ加工による純チタンの結晶粒超微細化

  辻 伸泰; 寺田 大将; 北原 弘基

  チタン, 2010年04月

  
• Fabrication of ZrAlNiCu bulk metallic glass composites containing pure copper particles by high-pressure torsion

  Y. F. Sun; H. Fujii; N. Tsuji; Y. Todaka; M. Umemoto

  Journal of Alloys and Compounds, 2010年03月04日, 査読有り

  
• High performance of mechanical and electrical properties of Cu-Cr-Zr alloy sheets produced by ARB process and additional thermo-mechanical treatment

  T. Akita; K. Kitagawa; K. Kita; M. Gotoh; Y. Hirose; N. Tsuji

  Journal of Physics: Conference Series, 2010年

  
• Effect of grain size distribution on mechanical properties of ultrafine grained Al severely deformed by ARB process and subsequently annealed

  D. Terada; H. Houda; N. Tsuji

  Journal of Physics: Conference Series, 2010年

  
• Mechanical properties and crash worthiness of ultrafine grained multi-phase steel sheets for automotive body applications

  Yoshitaka Okitsu; Tadashi Naito; Naoki Takaki; Tomoaki Sugiura; Nobuhiro Tsuji

  SAE Technical Papers, 2010年

  
• Quantitative analysis of local deformation in dual phase steel during tensile test by digital image correlation

  M. Wadamori; D. Terada; N. Tsuji

  Materials Science and Technology Conference and Exhibition 2010, MS and T'10, 2010年

  
• Nanostructure formation during deep wire-drawing of copper

  Nobuhiro Tsuji; Ken Ichi Hanazaki

  Materials Science Forum, 2010年

  
• Strain hardening and softening in ultrafine grained Al fabricated by ARB process

  Genki Horii; Daisuke Terada; Nobuhiro Tsuji

  Journal of Physics: Conference Series, 2010年, 査読有り

  
• Phase transformation from ultra-fine grained austenite in a medium carbon steel

  S. Daido; D. Terada; A. Shibata; N. Tsuji

  Materials Science and Technology Conference and Exhibition 2010, MS and T'10, 2010年, 査読有り

  
• Precipitation Behaviors from Ultrafine Grained Al Alloys Fabricated by Severe Plastic Deformation

  辻 伸泰; 寺田 大将; 中川 惠友; 金谷 輝人

  Materia Japan, 2010年

  この論文にアクセスする：

  
• Analysis of deformation behaviors of ultrafine grained Cu-30%Zn with bimodal grain-size distribution

  Takatoshi Morimitsu; Naoki Takata; Daisuke Terada; Nobuhiro Tsuji

  Journal of Physics: Conference Series, 2010年, 査読有り

  
• Susceptibility to hydrogen embrittlement of IF steel with ultrafine-grained structure produced by accumulative roll-bonding process

  T. Haruna; Y. Nakagawa; D. Terada; N. Takata; N. Tsuji

  Materials Science Forum, 2010年, 査読有り

  
• Fatigue fracture behavior of ARB processed aluminum

  Hiromoto Kitahara; Takuya Horike; Masayuki Tsushida; Shinji Ando; Nobuhiro Tsuji

  Materials Science Forum, 2010年

  
• Effect of initial grain size on the joint properties of friction stir welded aluminum

  Yufeng Sun; Hidetoshi Fujii; Yutaka Takada; Nobuhiro Tsuji; Kazuhiro Nakata; Kiyoshi Nogi

  Materials Science and Engineering A, 2009年12月15日, 査読有り

  この論文にアクセスする：

  
• Metallurgical aspects on the formation of self-organized anodic oxide nanotube layers

  Hiroaki Tsuchiya; Toshifumi Akaki; Junji Nakata; Daisuke Terada; Nobuhiro Tsuji; Yuichiro Koizumi; Yoritoshi Minamino; Patrik Schmuki; Shinji Fujimoto

  Electrochimica Acta, 2009年09月01日

  
• Ultrafine grained copper alloy sheets having both high strength and high electric conductivity

  Naoki Takata; Seong Hee Lee; Nobuhiro Tsuji

  Materials Letters, 2009年08月31日, 査読有り

  この論文にアクセスする：

  
• Plastic flow, structure and mechanical properties in pure Al deformed by twist extrusion

  Dmitry Orlov; Yan Beygelzimer; Sergey Synkov; Viktor Varyukhin; Nobuhiro Tsuji; Zenji Horita

  Materials Science and Engineering A, 2009年08月30日, 査読有り

  この論文にアクセスする：

  
• Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed

  Naoya Kamikawa; Xiaoxu Huang; Nobuhiro Tsuji; Niels Hansen

  Acta Materialia, 2009年08月, 査読有り

  この論文にアクセスする：

  
• Quantification of strain in accumulative roll-bonding under unlubricated condition by finite element analysis

  Tadanobu Inoue; Nobuhiro Tsuji

  Computational Materials Science, 2009年07月

  
• Anodic oxide nanotube layers on Ti-Ta alloys: Substrate composition, microstructure and self-organization on two-size scales

  Hiroaki Tsuchiya; Toshifumi Akaki; Junji Nakata; Daisuke Terada; Nobuhiro Tsuji; Yuichiro Koizumi; Yoritoshi Minamino; Patrik Schmuki; Shinji Fujimoto

  Corrosion Science, 2009年07月

  
• Fabrication of Bulk Nanostructured Materials by Accumulative Roll Bonding (ARB)

  Nobuhiro Tsuji

  Bulk Nanostructured Materials, 2009年06月24日

  
• Enhanced structural refinement by combining phase transformation and plastic deformation in steels

  N. Tsuji; T. Maki

  Scripta Materialia, 2009年06月, 査読有り

  この論文にアクセスする：

  
• Texture evolution in pure aluminum subjected to monotonous and reversal straining in high-pressure torsion

  Dmitry Orlov; Pinaki Prasad Bhattacharjee; Yoshikazu Todaka; Minoru Umemoto; Nobuhiro Tsuji

  Scripta Materialia, 2009年05月, 査読有り

  
• Hot Deformation Behaviors of Austenite Region in Medium Carbon Steel

  Takashi MIZUGUCHI; Masatsugu YAMASHITA; Daisuke TERADA; Nobuhiro TSUJI

  Proceedings of Asia Steel International Conference 2009, 2009年05月, 査読有り

  
• Cold rolling and recrystallization textures of a Ni-5 at.% W alloy

  P. P. Bhattacharjee; R. K. Ray; N. Tsuji

  Acta Materialia, 2009年04月, 査読有り

  
• Fabrication of CuZr(Al) bulk metallic glasses by high pressure torsion

  Y. F. Sun; T. Nakamura; Y. Todaka; M. Umemoto; N. Tsuji

  Intermetallics, 2009年04月, 査読有り

  
• Increasing the ductility of ultrafine-grained copper alloy by introducing fine precipitates

  Naoki Takata; Yusuke Ohtake; Kazuhisa Kita; Kazuo Kitagawa; Nobuhiro Tsuji

  Scripta Materialia, 2009年04月, 査読有り

  
• Role of strain reversal in grain refinement by severe plastic deformation

  Dmitry Orlov; Yoshikazu Todaka; Minoru Umemoto; Nobuhiro Tsuji

  Materials Science and Engineering A, 2009年01月15日, 査読有り

  
• A new route to fabricate ultrafine-grained structures in carbon steels without severe plastic deformation

  Yoshitaka Okitsu; Naoki Takata; Nobuhiro Tsuji

  Scripta Materialia, 2009年01月, 査読有り

  
• Structural change and improvement of the mechanical properties of a lotus-type porous copper by wire-brushing

  J. Lobos; S. Suzuki; H. Nakajima; Y. S. Ji; H. Fujii; D. Terada; N. Tsuji

  Journal of Physics: Conference Series, 2009年

  
• Microstructure homogeneity and mechanical properties of electrodeposited nanocrystalline Ni

  D. Terada; H. Hase; M. Sonobe; T. Yamasaki; N. Tsuji

  Journal of Physics: Conference Series, 2009年

  
• Ultrafine grained steels managing both high strength and ductility

  N. Tsuji

  Journal of Physics: Conference Series, 2009年

  
• Microstructure and Texture Evolution During the Accumulative Roll Bonding of Pure Ni

  P. P. Bhattacharjee; D. Terada; N. Tsuji

  MICROSTRUCTURE AND TEXTURE IN STEELS AND OTHER MATERIALS, 2009年, 査読有り

  
• Microstructure evolution in pure Al processed with twist extrusion

  Dmitry Orlov; Yan Beygelzimer; Sergey Synkov; Viktor Varyukhin; Nobuhiro Tsuji; Zenji Horita

  Materials Transactions, 2009年01月

  
• YIELD POINT PHENOMENA IN NANOSTRUCTURED PURE ALUMINUM

  Tsuji, N; Kamikawa, N; Terada, D; Huang, X; Hansen, N; Grivel, JC; Jensen, DJ; Mishin, OV; Nielsen, SF; Pantleon, W; Toftegaard, H; Winther, G; Yu, T

  Proceedings of the 30th Risø International Symposium on Materials Science: Nanostructured metals - Fundamentals to applications, 2009年

  
• Plastic flow and grain refinement under simple shear-based severe plastic deformation processing

  D. Orlov; Y. Todaka; M. Umemoto; Y. Beygelzimer; Z. Horita; N. Tsuji

  Materials Science Forum, 2009年, 査読有り

  
• CORRESPONDENCE BETWEEN STRAIN AND GRAIN BOUNDARY EVOLUTION IN PURE ALUMINIUM DURING HIGH PRESSURE TORSION TO LARGE STRAINS

  Dmitry Orlov; Yoshikazu Todaka; Minoru Umemoto; Nobuhiro Tsuji

  NANOSTRUCTURED METALS: FUNDAMENTALS TO APPLICATIONS, 2009年, 査読有り

  
• ARB法により超強加工されたIF鋼の微細組織

  辻 伸泰; 上路 林太郎; 紙川 尚也; 寺田 大将

  ふぇらむ : 日本鉄鋼協会会報 = Bulletin of the Iron and Steel Institute of Japan, 2009年01月01日

  
• 超強加工されたCu+Zr積層体におけるバルクメカニカルアロイングとアモルファス形成

  辻 伸泰; 大崎 智; 大久保 忠勝; 宝野 和博; 孫 玉峰; 寺田 大将; 戸高 義一; 梅本 実

  ふぇらむ : 日本鉄鋼協会会報 = Bulletin of the Iron and Steel Institute of Japan, 2009年01月01日

  
• Temperature and strain rate dependence of flow stress in severely deformed copper by accumulative roll bonding

  Takahiro Kunimine; Naoki Takata; Nobuhiro Tsuji; Toshiyuki Fujii; Masaharu Kato; Susumu Onaka

  Materials Transactions, 2009年01月, 査読有り

  
• 超強加工により形成する組織写真集―5 バルク超強加工材の組織 超強加工された純銅の粒界構造

  池田賢一; 山田康介; 高田尚記; 吉田冬樹; 中島英治; 辻伸泰

  ふぇらむ, 2009年01月01日

  
• Hot deformation and dynamic recrystallization behaviour of medium carbon steel in austenite region

  Takashi Mizuguchi; Masatsugu Yamashita; Daisuke Terada; Nobuhiro Tsuji

  Steel Research International, 2009年, 査読有り

  
• 超強加工された純銅の粒界構造

  池田 賢一; 山田 康介; 高田 尚記; 吉田 冬樹; 中島 英治; 辻 伸泰

  ふぇらむ : 日本鉄鋼協会会報 = Bulletin of the Iron and Steel Institute of Japan, 2009年01月01日

  
• Effect of strain on "hardening by annealing and softening by deformation" phenomena in ultra-fine grained aluminum

  Daisuke Terada; Hironobu Houda; Nobuhiro Tsuji

  Journal of Materials Science, 2008年12月, 査読有り

  
• Solid-state amorphization of Cu + Zr multi-stacks by ARB and HPT techniques

  Y. F. Sun; Y. Todaka; M. Umemoto; N. Tsuji

  Journal of Materials Science, 2008年12月, 査読有り

  
• Dynamic deformation behavior of ultrafine grained aluminum produced by ARB and subsequent annealing

  Naoki Takata; Yoshitaka Okitsu; Nobuhiro Tsuji

  Journal of Materials Science, 2008年12月, 査読有り

  
• Mechanical properties of ultrafine grained ferritic steel sheets fabricated by rolling and annealing of duplex microstructure

  Yoshitaka Okitsu; Naoki Takata; Nobuhiro Tsuji

  Journal of Materials Science, 2008年12月, 査読有り

  
• Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure

  R. Ueji; N. Tsuchida; D. Terada; N. Tsuji; Y. Tanaka; A. Takemura; K. Kunishige

  Scripta Materialia, 2008年11月

  
• Microstructure quantification and correlation with flow stress of ultrafine grained commercially pure Al fabricated by equal channel angular pressing (ECAP)

  M. Reihanian; R. Ebrahimi; M. M. Moshksar; D. Terada; N. Tsuji

  Materials Characterization, 2008年09月, 査読有り

  
• Evolution of antiphase domain (APD)/lamella mixed microstructure in Ti-39 at%Al single crystals

  Yuichiro Koizumi; Kazuki Iwamoto; Takayuki Tanaka; Nobuhiro Tsuji; Yoritoshi Minamino

  Materials Science and Engineering A, 2008年04月

  
• Analysis of the mechanical properties and deformation behavior of nanostructured commercially pure Al processed by equal channel angular pressing (ECAP)

  M. Reihanian; R. Ebrahimi; N. Tsuji; M. M. Moshksar

  Materials Science and Engineering A, 2008年01月25日

  
• Structure and mechanical properties of severely deformed Cu-Cr-Zr alloys produced by accumulative roll-bonding process

  K. Kitagawa; T. Akita; K. Kita; M. Gotoh; N. Takata; N. Tsuji

  Materials Science Forum, 2008年

  
• Severe plastic deformation (SPD) processes for metals

  A. Azushima; R. Kopp; A. Korhonen; D. Y. Yang; F. Micari; G. D. Lahoti; P. Groche; J. Yanagimoto; N. Tsuji; A. Rosochowski; A. Yanagida

  CIRP Annals - Manufacturing Technology, 2008年

  
• Microstructure and aging behavior of Al-0.2wt%Zr alloy heavily deformed by ARB process

  Takatoshi Sato; Daisuke Terada; Nobuhiro Tsuji

  Materials Science Forum, 2008年, 査読有り

  
• Formation mechanisms of ultrafine grained structures in severe plastic deformation of metallic materials

  Nobuhiro Tsuji

  Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 2008年, 査読有り

  
• Reversible texture transition during accumulative roll bonding

  Naoya Kamikawa; Xiaoxu Huang; Grethe Winther; Nobuhiro Tsuji; Niels Hansen

  Ceramic Transactions, 2008年, 査読有り

  
• Nanostructured aluminum and if steel produced by rolling - A comparative study

  Xiaoxu Huang; Naoya Kamikawa; Nobuhiro Tsuji; Niels Hansen

  ISIJ International, 2008年

  
• Reversal straining to manage structure in pure aluminum under SPD

  Dmitry Orlov; Pinaki Prasad Bhattacharjee; Yoshikazu Todaka; Minoru Umemoto; Nobuhiro Tsuji

  Materials Science Forum, 2008年, 査読有り

  
• Managing both strength and ductility in ultrafine grained steels

  Nobuhiro Tsuji; Naoya Kamikawa; Rintaro Ueji; Naoki Takata; Hirofumi Koyama; Daisuke Terada

  ISIJ International, 2008年

  
• Change in mechanical properties and microstructure of ARB processed Ti during annealing

  Daisuke Terada; Masaya Inoue; Hiromoto Kitahara; Nobuhiro Tsuji

  Materials Transactions, 2008年01月, 査読有り

  
• Fatigue crack propagation behavior in commercial purity Ti severely deformed by accumulative roll bonding process

  Hiromoto Kitahara; Kosuke Uchikado; Jun Ichi Makino; Naomi Iida; Masayuki Tsushida; Nobuhiro Tsuji; Shinji Ando; Hideki Tonda

  Materials Transactions, 2008年01月, 査読有り

  
• Grain boundary structure of ultrafine grained pure copper fabricated by accumulative roll bonding

  Ken Ichi Ikeda; Kousuke Yamada; Naoki Takata; Fuyuki Yoshida; Hideharu Nakashima; Nobuhiro Tsuji

  Materials Transactions, 2008年01月

  
• Grain boundary structures of ARB processed aluminum

  Seiichiro Ii; Motoki Hishida; Naoki Takata; Ken Ichi Ikeda; Hideharu Nakashima; Nobuhiro Tsuji

  Materials Science Forum, 2008年

  
• Nanostructured bulk copper fabricated by accumulative roll bonding

  Naoki Takata; Seong Hee Lee; Cha Yong Lim; Sang Shik Kim; Nobuhiro Tsuji

  Journal of Nanoscience and Nanotechnology, 2007年11月

  
• Unique mechanical properties of nanostructured metals

  Nobuhiro Tsuji

  Journal of Nanoscience and Nanotechnology, 2007年11月

  
• Effect of redundant shear strain on microstructure and texture evolution during accumulative roll-bonding in ultralow carbon IF steel

  N. Kamikawa; T. Sakai; N. Tsuji

  Acta Materialia, 2007年10月

  
• EBSDデータによるバリアント解析プログラムの開発

  森本敬治; 吉田冬樹; 竹士伊知郎; 北原弘基; 辻伸泰

  鉄と鋼, 2007年09月, 査読有り

  
• Through-thickness characterization of microstructure and texture in high purity aluminum processed to high strain by accumulative roll-bonding

  Naoya Kamikawa; Nobuhiro Tsuji; Xiaoxu Huang; Niels Hansen

  Materials Transactions, 2007年08月

  
• Change in microstructure and texture during annealing of pure copper heavily deformed by accumulative roll bonding

  Naoki Takata; Kousuke Yamada; Ken Ichi Ikeda; Fuyuki Yoshida; Hideharu Nakashima; Nobuhiro Tsuji

  Materials Transactions, 2007年08月

  
• Fabrication of bulk metallic glass sheet in Cu-47 at% Zr alloys by ARB and heat treatment

  Yufeng Sun; Nobuhiro Tsuji; Shiro Kato; Satoru Ohsaki; Kazuhiro Hono

  Materials Transactions, 2007年07月, 査読有り

  
• Bulk mechanical alloying of Cu-Ag and Cu/Zr two-phase microstructures by accumulative roll-bonding process

  S. Ohsaki; S. Kato; N. Tsuji; T. Ohkubo; K. Hono

  Acta Materialia, 2007年05月, 査読有り

  
• Friction stir welding of a high carbon steel

  Ling Cui; Hidetoshi Fujii; Nobuhiro Tsuji; Kiyoshi Nogi

  Scripta Materialia, 2007年04月

  
• Microstructure and mechanical properties of commercial purity titanium severely deformed by ARB process

  Daisuke Terada; Seiya Inoue; Nobuhiro Tsuji

  Journal of Materials Science, 2007年03月, 査読有り

  
• General mechanism for the synchronization of electrochemical oscillations and self-organized dendrite electrodeposition of metals with ordered 2D and 3D microstructures

  Kazuhiro Fukami; Shuji Nakanishi; Haruka Yamasaki; Toshio Tada; Kentaro Sonoda; Naoya Kamikawa; Nobuhiro Tsuji; Hidetsugu Sakaguchi; Yoshihiro Nakato

  Journal of Physical Chemistry C, 2007年01月25日

  
• Reaction of Sn to nanocrystalline surface layer of Cu by near surface severe plastic deformation

  Y. Minamino; Y. Koizumi; N. Tsuji; Y. Nakamizo; T. Shibayanagi; M. Naka

  Solid State Phenomena, 2007年

  
• Ultrasonic spectroscopy and X-ray diffraction study for ARB aluminum

  K. Hirai; T. Ichitsubo; E. Matsubara; N. Tsuji

  Materials Science Forum, 2007年

  
• Microstructure evolution after large strain deformation in Al-0.13%Mg

  J. R. Bowen; T. Masui; N. Tsuji

  Materials Science Forum, 2007年

  
• Evolution of microstructure and texture of pure AL single crystal having {112}〈110〉 orientation during severe plastic deformation

  Naoki Ishida; Daisuke Terada; Keizo Kashihara; Nobuhiro Tsuji

  Advanced Materials Research, 2007年, 査読有り

  
• Grain size saturation during severe plastic deformation

  Nobuhiro Tsuji; Naoya Kamikawa; Bolong Li

  Materials Science Forum, 2007年, 査読有り

  
• Low temperature recrystallization of high purity iron severely deformed by ARB process

  Daisuke Terada; Bolong Li; Masaaki Sugiyama; Nobuhiro Tsuji

  Materials Science Forum, 2007年, 査読有り

  
• ARB法により強ひずみ加工したCu-Cr-Zr合金の組織と機械的特性

  大竹祐輔; 北川和夫; 北 和久; 高田 尚記; 辻 伸泰; 青木庄治

  銅と銅合金, 2007年

  
• Bulk mechanical alloying of AL/FE multilayer by accumulative roll-bonding process

  Takuro Nakamura; Hiromoto Kitahara; Jung Goo Lee; Nobuhiro Tsuji

  Advanced Materials Research, 2007年, 査読有り

  
• Mechanical properties of ultra-fine grained Fe-Cr-Ni alloy fabricated by ARB

  Taro Maekawa; Hiromoto Kitahara; Nobuhiro Tsuji

  Advanced Materials Research, 2007年, 査読有り

  
• Transformation in stir zone of friction stir welded carbon steels with different carbon contents

  Ling Cui; Hidetoshi Fujii; Nobuhiro Tsuji; Kazuhiro Nakata; Kiyoshi Nogi; Rinsei Ikeda; Muneo Matsushita

  ISIJ International, 2007年

  
• In-situ EBSP analysis of grain boundary migration during recrystallization in pure aluminum foils

  Naoki Takata; Ken Ichi Ikeda; Hideharu Nakashima; Nobuhiro Tsuji

  Materials Science Forum, 2007年

  
• Martensite transformation from ultrafine grained austenite in Fe-28.5 at.% Ni

  Hiromoto Kitahara; Nobuhiro Tsuji; Yoritoshi Minamino

  Materials Science and Engineering A, 2006年11月25日, 査読有り

  
• Friction stir welding of carbon steels

  Hidetoshi Fujii; Ling Cui; Nobuhiro Tsuji; Masakatsu Maeda; Kazuhiro Nakata; Kiyoshi Nogi

  Materials Science and Engineering A, 2006年08月15日

  
• Quantification of annealed microstructures in ARB processed aluminum

  Naoya Kamikawa; Nobuhiro Tsuji; Xiaoxu Huang; Niels Hansen

  Acta Materialia, 2006年06月

  
• Microstructure homogeneity in various metallic materials heavily deformed by accumulative roll-bonding

  B. L. Li; N. Tsuji; N. Kamikawa

  Materials Science and Engineering A, 2006年05月15日

  
• Hardening by annealing and softening by deformation in nanostructured metals

  Xiaoxu Huang; Niels Hansen; Nobuhiro Tsuji

  Science, 2006年04月, 査読有り

  
• Energies of conservative and non-conservative antiphase boundaries in Ti 3 Al: A first principles study

  Y. Koizumi; S. Ogata; Y. Minamino; N. Tsuji

  Philosophical Magazine, 2006年03月21日, 査読有り

  
• Crystallographic features of lath martensite in low-carbon steel

  Hiromoto Kitahara; Rintaro Ueji; Nobuhiro Tsuji; Yoritoshi Minamino

  Acta Materialia, 2006年03月, 査読有り

  
• Accumulative roll bonding of AA8006, AA8011 and AA5754 sheets

  M. Slámová; P. Homola; P. Sláma; M. Karlík; M. Cieslar; Y. Ohara; N. Tsuji

  Materials Science Forum, 2006年

  
• Microstructural evolution during friction stir welding of ultrafine grained Al alloys

  Y. S. Sato; M. Urata; Y. Kurihara; S. H.C. Park; H. Kokawa; K. Ikeda; N. Tsuji

  Materials Science Forum, 2006年

  
• Enhancement of reaction of zinc on superficially nanocrystallized if steel by near surface-severe plastic deformation

  Y. Minamino; N. Tsuji; Y. Koizumi; Y. Nakamizo; M. Sato; T. Shibayanagi; M. Naka

  Materials Science Forum, 2006年

  
• Microstructural evolution in pure copper severely deformed by the ARB process

  B. L. Li; N. Shigeiri; N. Tsuji; Y. Minamino

  Materials Science Forum, 2006年

  
• Tensile deformation behaviors of ultrafine grained Al-Fe-Si alloy sheets

  Hyoung Wook Kim; Suk Bong Kang; Nobuhiro Tsuji; Yoritoshi Minamino

  Materials Science Forum, 2006年

  
• Microstructural evolution in 36%NI austenitic steel during the ARB process

  Bolong Li; Nobuhiro Tsuji; Yoritoshi Minamino

  Materials Science Forum, 2006年

  
• EBSD and TEM characterization of ultrafine grained high purity aluminum produced by accumulative roll-bonding

  N. Kamikawa; X. Huang; N. Tsuji; N. Hansen; Y. Minamino

  Materials Science Forum, 2006年

  
• Internal stress field in ultrafine grained aluminium fabricated by accumulative roll-bonding

  R. Ueji; J. Taniguchi; N. Sumida; K. Tanaka; N. Tsuji

  Materials Science Forum, 2006年

  
• Variant selection of plate martensite in Fe-28.5at.%Ni alloy

  Hiromoto Kitahara; Masato Ueda; Nobuhiro Tsuji; Yoritoshi Minamino

  Materials Science Forum, 2006年, 査読有り

  
• Martensite transformation of ultrafine grained austenite in Fe-28.5at%Ni alloy

  Hiromoto Kitahara; Nobuhiro Tsuji; Yoritoshi Minamino

  Materials Science Forum, 2006年, 査読有り

  
• Friction stir welding of ultrafine grained interstitial free steels

  Hidetoshi Fujii; Rintaro Ueji; Yutaka Takada; Hiromoto Kitahara; Nobuhiro Tsuji; Kazuhiro Nakata; Kiyoshi Nogi

  Materials Transactions, 2006年01月

  
• Annealing behavior and recrystallized texture in ARB processed copper

  Naoki Takata; Kousuke Yamada; Ken Ich Ikeda; Fuyuki Yoshida; Hideharu Nakashima; Nobuhiro Tsuji

  Materials Science Forum, 2006年

  
• Grain boundary structure in ARB processed copper

  Ken Ichi Ikeda; Naoki Takata; Kousuke Yamada; Fuyuki Yoshida; Hideharu Nakashima; Nobuhiro Tsuji

  Materials Science Forum, 2006年

  
• 「電子顕微鏡法による材料開発のための微細構造研究最前線(5)」低炭素鋼ラスマルテンサイト組織の結晶学的特徴

  北原弘基; 上路林太郎; 辻伸泰; 南埜宜俊

  まてりあ, 2005年12月20日

  
• Deformation textures of AA8011 aluminum alloy sheets severely deformed by accumulative roll bonding

  Hyoung Wook Kim; Suk Bong Kang; Nobuhiro Tsuji; Yoritoshi Minamino

  Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2005年11月

  
• 繰り返し重ね接合圧延(ARB)により結晶粒超微細化されたニッケルの内部摩擦

  小泉 雄一郎; 植山 将宜; 辻 伸泰; 南埜 宜俊; 太田健一

  日本金属学会誌, 2005年11月, 査読有り

  
• Crystallographic analysis of plate martensite in Fe-28.5 at.% Ni by FE-SEM/EBSD

  Hiromoto Kitahara; Rintaro Ueji; Masato Ueda; Nobuhiro Tsuji; Yoritoshi Minamino

  Materials Characterization, 2005年05月, 査読有り

  
• Elongation increase in ultra-fine grained Al-Fe-Si alloy sheets

  Hyoung Wook Kim; Suk Bong Kang; Nobuhiro Tsuji; Yoritoshi Minamino

  Acta Materialia, 2005年04月

  
• Formation of ultrafine grained microstructure in metallic materials by severe plastic deformation

  Nobuhiro Tsuji

  Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2005年03月

  
• Diffusion reactivity between zinc plate layer and nanocrystalline surface layer of if steel by near surface-severe plastic deformation

  Y. Minamino; N. Tsuji; Y. Koizumi; Y. Nakamizo; M. Sato; T. Shibayanagi; M. Naka

  Materials Science Forum, 2005年

  
• Bulk Fe-Al-C nanoalloys made by mechanically alloying with subsequent spark plasma sintering and their mechanical properties

  Yoritoshi Minamino; Yuichiro Koizumi; Nobuhiro Tsuji; Naoko Hirohata; Kiyoshi Mizuuchi; Yoshihira Ohkanda

  Solid State Phenomena, 2005年

  
• Diffusion of Si in Ti3Al intermetallic compound

  Yuichiro Koizumi; Yohei Sakakibara; Yoritoshi Minamino; Nobuhiro Tsuji

  Defect and Diffusion Forum, 2005年

  
• Evolution of antiphase domain (APD)/nanolamellar complex structure in Ti-Al single crystals

  Yuichiro Koizumi; Kazuki Iwamoto; Nobuhiro Tsuji; Yoritoshi Minamino

  Materials Science and Technology, 2005年

  
• Bulk mechanical alloying of Zr-Cu system by accumulative roll bonding (ARB)

  N. Tsuji; S. Kato; S. Ohsaki; K. Hono; Y. Minamino

  Journal of Metastable and Nanocrystalline Materials, 2005年, 査読有り

  
• Structure and strength after large strain deformation

  Niels Hansen; X. Huang; R. Ueji; N. Tsuji

  Materials Science and Engineering A, 2004年12月15日

  
• Toughness of ultrafine grained ferritic steels fabricated by ARB and annealing process

  Nobuhiro Tsuji; Susumu Okuno; Yuichiro Koizumi; Yoritoshi Minamino

  Materials Transactions, 2004年07月

  
• Microstructures and mechanical properties of bulk nanocrystalline Fe-Al-C alloys made by mechanically alloying with subsequent spark plasma sintering

  Yoritoshi Minamino; Yuichiro Koizumi; Nobuhiro Tsuji; Naoko Hirohata; Kiyoshi Mizuuchi; Yoshihira Ohkanda

  Science and Technology of Advanced Materials, 2004年01月

  
• Growth kinetics of antiphase domain in Ti3Al intermetallic compound

  Y. Koizumi; H. Katsumura; Y. Minamino; N. Tsuji; J. G. Lee; H. Mori

  Science and Technology of Advanced Materials, 2004年01月

  
• Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bonding

  Y. S. Sato; Y. Kurihara; S. H.C. Park; H. Kokawa; N. Tsuji

  Scripta Materialia, 2004年01月

  
• Aging behavior of ultrafine grained Al-2 wt%Cu alloy severely deformed by accumulative roll bonding

  Nobuhiro Tsuji; Taku Iwata; Masahide Sato; Shinji Fujimoto; Yoritoshi Minamino

  Science and Technology of Advanced Materials, 2004年01月

  
• Formation of nanocrystalline surface layers in various metallic materials by near surface severe plastic deformation

  Masahide Sato; Nobuhiro Tsuji; Yoritoshi Minamino; Yuichiro Koizumi

  Science and Technology of Advanced Materials, 2004年01月

  
• Matrix strength evaluation of ultra-fine grained steel by nanoindentation

  T. Ohmura; K. Tsuzaki; N. Tsuji; N. Kamikawa

  Journal of Materials Research, 2004年01月

  
• Microstructure and texture through thickness of ultralow carbon IF steel sheet severely deformed by accumulative roll-bonding

  N. Kamikawa; N. Tsuji; Y. Minamino

  Science and Technology of Advanced Materials, 2004年01月

  
• Effect of strain on deformation microstructure and subsequent annealing behavior of if steel heavily deformed by ARB process

  Nobuhiro Tsuji; Naoya Kamikawa; Yoritoshi Minamino

  Materials Science Forum, 2004年

  
• Surface nanocrystalline metallic materials fabricated by near surface severe plastic deformation

  Nobuhiro Tsuji; Masahide Sato; Yoritoshi Minamino; Yuichiro Koizumi

  MPMD Fifth Global Innovations Proceedings, Surfaces and Interfaces in Nanostructured Materials and Trends in LIGA, Miniaturization, and Nanoscale Materials, 2004年

  
• Fabrication of bulk nanostructured materials by ARB (accumulative roll bonding) process

  N. Tsuji; N. Kamikawa; H. W. Kim; Y. Minamino

  Ultrafine Grained Materials III, 2004年

  
• Effect of rolling reduction on ultrafine grained structure and mechanical properties of low-carbon steel thermomechanically processed from martensite starting structure

  Rintaro Ueji; Nobuhiro Tsuji; Yoritoshi Minamino; Yuichiro Koizumi

  Science and Technology of Advanced Materials, 2004年01月, 査読有り

  
• Structure of martensite transformed from severely deformed austenite in Fe-28.5at.%Ni

  H. Kitahara; T. Kimura; N. Tsuji; Y. Koizumi; Y. Minamino

  Ultrafine Grained Materials III, 2004年, 査読有り

  
• Microstructure and mechanical properties of ultrafine grained low carbon steel fabricated by conventional cold-rolling and annealing of martensite (martensite process)

  R. Ueji; N. Tsuji; Y. Minamino; Y. Koizumi

  Ultrafine Grained Materials III, 2004年, 査読有り

  
• 電子顕微鏡法による材料開発のための微細構造研究最前線(3) EBSP法による30mass%Ni鋼のレンズマルテンサイトの結晶学的解析

  北原弘基; 上路林太郎; 辻伸泰; 南埜宣俊

  まてりあ, 2003年12月, 査読有り

  
• Densification and Structural Evolution in Spark Plasma Sintering Process of Mechanically Alloyed Nanocrystalline Fe-23Al-6C Powder

  Yuichiro Koizumi; Takanori Tanaka; Yoritoshi Minamino; Nobuhiro Tsuji; Kiyoshi Mizuuchi; Yoshihira Ohkanda

  Materials Transactions, 2003年08月

  
• Effect of aluminum and silicon on magnetic properties and microstructures of Fe-Cr-Ni-C-Al and Fe-Cr-Ni-C-Si alloys

  Shin Ichiro Yokoyama; Tsutomu Inui; Yoritoshi Minamino; Nobuhiro Tsuji

  Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 2003年07月

  
• High damping capacity of ultra-fine grained aluminum produced by accumulative roll bonding

  Yuichiro Koizumi; Masanori Ueyama; Nobuhiro Tsuji; Yoritoshi Minamino; Ken'ichi Ota

  Journal of Alloys and Compounds, 2003年06月30日

  
• Microstructural change of ultrafine-grained aluminum during high-speed plastic deformation

  N. Tsuji; T. Toyoda; Y. Minamino; Y. Koizumi; T. Yamane; M. Komatsu; M. Kiritani

  Materials Science and Engineering A, 2003年06月15日

  
• ARB (accumulative roll-bonding) and other new techniques to produce bulk ultrafine grained materials

  Nobuhiro Tsuji; Yoshihiro Saito; Seong Hee Lee; Yoritoshi Minamino

  Advanced Engineering Materials, 2003年05月01日

  
• Microstructural evolution during accumulative roll-bonding of commercial purity aluminum

  X. Huang; N. Tsuji; N. Hansen; Y. Minamino

  Materials Science and Engineering A, 2003年01月15日, 査読有り

  
• Interdiffusion in Co solid solutions of Co-Al-Cr-Ni system at 1423 K

  Yoritoshi Minamino; Yuichiro Koizumi; Nobuhiro Tsuji; Toru Yamada; Tomoshi Takahashi

  Materials Transactions, 2003年01月

  
• Mechanical properties as a function of grain size in ultrafine grained aluminum and iron fabricated by ARB and annealing process

  N. Tsuji; S. Okuno; T. Matsuura; Y. Koizumi; Y. Minamino

  Materials Science Forum, 2003年

  
• Fabrication of surface nanocrystalline aluminum alloys

  M. Sato; N. Tsuji; Y. Minamino; Y. Koizumi

  Materials Science Forum, 2003年

  
• Quantitative analysis of structure-strength relation of commercial purity aluminium deformed by accumulative roll bonding and annealed at low temperature

  R. Ueji; X. Huang; N. Hansen; N. Tsuji; Y. Minamino

  Materials Science Forum, 2003年

  
• Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing

  N. Tsuji; Y. Ito; Y. Saito; Y. Minamino

  Scripta Materialia, 2002年12月

  
• Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite

  R. Ueji; N. Tsuji; Y. Minamino; Y. Koizumi

  Acta Materialia, 2002年09月20日, 査読有り

  
• Ultrafine grained steels

  Nobuhiro Tsuji

  Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 2002年07月

  
• Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process

  N. Tsuji; R. Ueji; Y. Minamino

  Scripta Materialia, 2002年07月

  
• Role of shear strain in ultragrain refinement by accumulative roll-bonding (ARB) process

  S. H. Lee; Y. Saito; N. Tsuji; H. Utsunomiya; T. Sakai

  Scripta Materialia, 2002年02月

  
• B2型規則構造の金属間化合物NiAlにおけるCoの拡散

  南埜 宜俊; 小泉 雄一郎; 辻 伸泰; 山田 徹

  日本金属学会誌, 2002年02月, 査読有り

  
• A new and simple process to obtain nano-structured bulk low-carbon steel with superior mechanical property

  N. Tsuji; R. Ueji; Y. Minamino; Y. Saito

  Scripta Materialia, 2002年02月

  
• Change in microstructure during annealing of ultrafine grained aluminum produced by ARB

  N. Tsuji; Y. Ito; H. Nakashima; F. Yoshida; Y. Minamino

  Materials Science Forum, 2002年

  
• Texture properties of AA8011 aluminum alloy sheet manufactured by the accumulative roll bonding process (ARB)

  Hyoung Wook Kim; Suk Bong Kang; Zhan Ping Xing; Nobuhiro Tsuji; Yoritoshi Minamino

  Materials Science Forum, 2002年

  
• Microtexture of lamellar structures in Al heavily deformed by accumulative roll-bonding (ARB)

  X. Huang; N. Tsuji; N. Hansen; Y. Minanino

  Materials Science Forum, 2002年, 査読有り

  
• B2型規則構造のNiAl中のTiの拡散

  南埜 宜俊; 小泉 雄一郎; 辻 伸泰; 横山 紳一郎

  高温学会誌, 2002年, 査読有り

  
• Orientation analysis of ultra-fine grained bulk materials produced by Accumulative Roll-Bonding (ARB) process by the use of EBSP technique

  Rika Yoda; Hiroyuki Haren; Nobuhiro Tsuji; Rintaro Ueji; Takashi Toyoda; Yoritoshi Minamino

  Microscopy and Microanalysis, 2002年

  
• A Novel Process to Obtain Nanostructured Low-Carbon Bulky Steel with High Strength

  Nobuhiro Tsuji; Rintaro Ueji; Yoshihiro Saito; Yuichiro Koizumi; Yoritoshi Minamino

  Proceedings of the 22nd RISO International Symposium on Materials Science, RISO National Laboratory, Denmark,, 2001年, 査読有り

  
• Pt diffusion in B2-type ordered NiAl intermetallic compound and its diffusion mechanisms

  Y. Minamino; Y. Koizumi; N. Tsuji; M. Morioka; K. Hirao; Y. Shirai

  Science and Technology of Advanced Materials, 2000年12月, 査読有り

  
• Change in microstructure and mechanical properties of ultra-fine grained aluminum during annealing

  Yoshinori Ito; Nobuhiro Tsuji; Yoshihiro Saito; Hiroshi Utsunomiya; Tetsuo Sakai

  Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 2000年

  
• Fabrication and refinement of 6061(p)/6063 aluminum laminate by accumulative roll-bonding (ARB) process

  Seong Hee Lee; Yoshihiro Saito; Tetsuo Sakai; Hiroshi Utsunomiya; Nobuhiro Tsuji

  Materials Science Forum, 2000年

  
• Dynamic recrystallization in 18%Cr ferritic steel

  Hiroyuki Yagi; Nobuhiro Tsuji; Yoshihiro Saito

  Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 2000年

  
• Strengthening of sheath-rolled aluminum based MMC by the ARB process

  Seong Hee Lee; Tetsuo Sakai; Yoshihiro Saito; Hiroshi Utsunomiya; Nobuhiro Tsuji

  Materials Transactions, JIM, 1999年12月

  
• アルミニウムの繰り返し重ね接合圧延（ARB）における潤滑の影響

  宇都宮裕; 丹田浩司; 齋藤好弘; 左海哲夫; 辻 伸泰

  塑性と加工, Vol.~40, No.~467, pp.~1187-1191, 1999年12月, 招待有り

  
• Superplasticity of ultra-fine grained Al-Mg alloy produced by accumulative roll-bonding

  Nobuhiro Tsuji; Katsuhiko Shiotsuki; Yoshihiro Saito

  Materials Transactions, JIM, 1999年08月

  
• Production of Al-Cu superplastic sheets by means of the melt direct rolling

  Nobuhiro Tsuji; Takashi Nakamura; Yoshihiro Saito

  Keikinzoku/Journal of Japan Institute of Light Metals, 1999年08月

  
• Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process

  N. Tsuji; Y. Saito; H. Utsunomiya; S. Tanigawa

  Scripta Materialia, 1999年03月05日

  
• Accumulative roll-bonding of 1100 aluminum

  Yoshihiro Saito; Hiroshi Utsunomiya; Nobuhiro Tsuji; Tetsuo Sakai; Ren Guo Hong

  Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 1999年

  
• Low temperature superplasticity of ultra-fine grained 5083 aluminum alloy produced by accumulative roll-bonding

  N. Tsuji; K. Shiotsuki; H. Utsunomiya; Y. Saito

  Materials Science Forum, 1999年

  
• Mechanical properties of spring wire drawn and tempered at lower bainite region

  Michihiko Ayada; Kazuo Inoue; Nobuhiro Tsuji; Yoshihiro Saito

  Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1999年

  
• Novel ultra-high straining process for bulk materials development of the accumulative roll-bonding (ARB) process

  Y. Saito; H. Utsunomiya; N. Tsuji; T. Sakai

  Acta Materialia, 1999年

  
• Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process

  Y. Saito; N. Tsuji; H. Utsunomiya; T. Sakai; R. G. Hong

  Scripta Materialia, 1998年10月05日

  
• Microstructure and texture of commercial purity aluminum strips produced by melt direct rolling

  Nobuhiro Tsuji; Yuichi Nagai; Tetsuo Sakai; Yoshihiro Saito

  Materials Transactions, JIM, 1998年02月

  
• Effect of vanadium and niobium on restoration behavior after hot deformation in medium carbon spring steels

  Michihiko Ayada; Masao Yuga; Nobuhiro Tsuji; Yoshihiro Saito; Akio Yoneguti

  ISIJ International, 1998年

  
• Deformation Microstructure and Nucleation of Recrystallization in Hot-deformed Single Crystals of 18% Cr Ferritic Steel

  Nobuhiro Tsuji; Toyohisa Shinmiya; Yoshihiro Saito; Mineo Muraki

  ISIJ International, 1998年

  
• Occurrence of dynamic recrystallization in ferritic iron

  Nobuhiro Tsuji; Yukihiro Matsubara; Yoshihiro Saito; Tadashi Maki

  Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 1998年, 査読有り

  
• Dynamic recrystallization of ferrite in interstitial free steel

  N. Tsuji; Y. Matsubara; Y. Saito

  Scripta Materialia, 1997年08月15日

  
• Effect of boron addition on the microstructure of hot-deformed Ti-added interstitial free steel

  Nobuhiro Tsuji; Yukihiro Matsubara; Tetsuo Sakai; Yoshihiro Saito

  ISIJ International, 1997年

  
• Recrystallization of solidified columnar crystals in an Fe-36%Ni austenitic alloy

  N. Tsuji; H. Takebayashi; T. Takiguchi; K. Tsuzaki; T. Maki

  Acta Metallurgica Et Materialia, 1995年02月, 査読有り

  
• Effect of initial orientation on the cold-rolling behavior of solidified columnar crystals in an Fe-36%Ni austenitic alloy

  N. Tsuji; H. Takebayashi; T. Takiguchi; K. Tsuzaki; T. Maki

  Acta Metallurgica Et Materialia, 1995年02月, 査読有り

  
• Effects of Rolling Reduction and Annealing Temperature on the Recrystallization Structure of Solidified Columnar Crystals in a 19% Cr Ferritic Stainless Steel

  Nobuhiro Tsuji; Kaneaki Tsuzaki; Tadashi Maki

  ISIJ International, 1994年, 査読有り

  
• Effect of constraint on the rolled microstructure of (001)[100] oriented single crystals in an Fe-19%Cr ferritic alloy

  N. Tsuji; T. Hyoue; K. Tsuzaki; T. Maki

  Scripta Metallurgica et Materiala, 1993年08月15日

  
• Effect of Initial Orientation on the Recrystallization Behavior of Solidified Columnar Crystals in a 19% Cr Ferritic Stainless Steel

  Nobuhiro Tsuji; Kaneaki Tsuzaki; Tadashi Maki

  ISIJ International, 1993年

  
• Effect of Initial Orientation on the Cold Rolling Behavior of Solidified Columnar Crystals in a 19% Cr Ferritic Stainless Steel

  Nobuhiro Tsuji; Kaneaki Tsuzaki; Tadashi Maki

  ISIJ International, 1992年, 査読有り

  
• RECRYSTALLIZATION OF COLUMNAR CRYSTALS OF FERRITIC STAINLESS-STEEL

  K TSUZAKI; N TSUJI; T MAKI

  RECRYSTALLIZATION 90, 1990年, 査読有り

  

MISC

• その場中性子回折による20KにおけるAZ31マグネシウム合金の変形双晶の形成と消滅挙動の調査

  ゴン ウー; ハルヨ ステファヌス; 川崎卓郎; 相澤一也; 辻伸泰

  量子ビームサイエンスフェスタ(Web), 2024年

  
• その場中性子回折によるZ6マグネシウム合金の析出強化の考察

  ゴン ウー; 鄭瑞暁; 鄭瑞暁; ハルヨ ステファヌス; 川崎卓郎; 辻伸泰

  日本金属学会講演大会(Web), 2023年

  
• その場中性子回折による20KにおけるAZ31合金の双晶形成と双晶消滅の調査

  ゴン ウー; ハルヨ ステファヌス; 川崎卓郎; 相澤一也; 辻伸泰

  日本金属学会講演大会(Web), 2023年

  
• Fe-22Mn-0.6C鋼の強化機構に及ぼす変形温度の影響

  加藤宏和; 黄錫永; 朴明験; SI Gao; 平田雅裕; 足立大樹; 辻伸泰

  日本金属学会講演大会(Web), 2023年

  
• Ultra-fine grained ferrous and aluminum alloys produced by accumulative roll-bonding

  N Tsuji; Y Saito; Y Ito; H Utsunomiya; T Sakai

  ULTRAFINE GRAINED MATERIALS, 2000年

  
• AZ31合金繰り返し変形挙動のマルチスケール観察

  ゴン ウー; ハルヨ ステファヌス; 川崎卓郎; 相澤一也; 辻伸泰

  量子ビームサイエンスフェスタ(Web), 2022年

  
• AZ31マグネシウム合金の変形双晶の形成と消滅のマルチスケール観察

  ゴン ウー; 鄭瑞暁; 鄭瑞暁; ハルヨ ステファヌス; 川崎卓郎; 相澤一也; 辻伸泰

  日本金属学会講演大会(Web), 2022年

  
• その場中性子回折によるAZ31合金の極低温変形メカニズムの考察

  ゴン ウー; ステファヌス ハルヨ; 眞山剛; 川崎卓郎; 相澤一也; 孫彬せん; 辻伸泰

  日本金属学会講演大会(Web), 2021年

  
• 低炭素ベイナイト鋼のき裂進展開始抵抗・き裂伝播抵抗におよぼすBain unit sizeの影響

  坪井瑞記; 柴田曉伸; 辻伸泰

  材料とプロセス(CD-ROM), 2016年

  
• 中炭素鋼におけるマルテンサイトおよびベイナイトの低温脆性破壊と微視組織の関係

  勝野友之; 坪井瑞記; 柴田曉伸; 辻伸泰

  材料とプロセス(CD-ROM), 2015年

  
• 低炭素ベイナイト鋼の破壊靭性におよぼすBainサイズの影響

  坪井瑞記; 古渕義史; 柴田曉伸; 辻伸泰

  材料とプロセス(CD-ROM), 2015年

  
• 低炭素マルテンサイト鋼における低温脆性破壊の結晶学的解析

  坪井瑞記; 柴田曉伸; 寺田大将; 辻伸泰

  材料とプロセス(CD-ROM), 2014年

  
• 低炭素ベイナイト鋼の低温脆性におよぼす微視組織の影響

  坪井瑞記; 古渕義史; 柴田曉伸; 辻伸泰

  材料とプロセス(CD-ROM), 2014年

  
• 低炭素マルテンサイト鋼の脆性破壊挙動

  柴田曉伸; 坪井瑞記; 辻伸泰

  日本金属学会講演概要(CD-ROM), 2014年

  
• 超微細粒フェライト+マルテンサイトDual Phase鋼の光学的全視野ひずみ測定法による局所変形挙動の解析

  坪井瑞記; 寺田大将; 辻伸泰

  材料とプロセス(CD-ROM), 2013年

  
• 低炭素マルテンサイト鋼の低温脆性とマルテンサイト微視組織の関係

  坪井瑞記; 柴田曉伸; 寺田大将; 辻伸泰

  材料とプロセス(CD-ROM), 2013年

  
• マルテンサイト鋼における脆性破壊挙動~低温脆性と水素脆性~

  柴田曉伸; 坪井瑞記; 松岡雄大; 村田有; 辻伸泰

  日本学術会議材料工学連合講演会講演論文集, 2013年

  
• 低炭素マルテンサイト鋼の低温脆性とマルテンサイト微視組織の関係

  坪井瑞記; 坪井瑞記; 柴田曉伸; 寺田大将; 辻伸泰

  日本金属学会講演概要(CD-ROM), 2013年

  
• Ni-Cr二元系合金の室温力学特性に及ぼす短範囲規則化の影響

  常盤大樹; 吉田周平; 吉田周平; 宮嶋陽司; 辻伸泰; 辻伸泰

  日本金属学会講演大会(Web), 2022年

  
• 高純度2元系Al希薄合金のARB加工材における合金元素の影響

  武井亮太; 宮嶋陽司; 辻伸泰; 藤居俊之; 尾中晋; 加藤雅治

  日本金属学会講演概要(CD-ROM), 2014年

  
• Al-Mg二元系合金と同純度AlのARB加工材における組織と力学特性の比較

  武井亮太; 宮嶋陽司; 辻伸泰; 藤居俊之; 尾中晋; 加藤雅治

  日本金属学会講演概要(CD-ROM), 2013年

  
• 超微細粒アルミニウムにおける引張り変形中の転位密度変化に及ぼす結晶粒径と初期転位密度の影響

  足立大樹; 宮嶋陽司; 佐藤眞直; 寺田大将; 辻伸泰

  日本金属学会講演概要(CD-ROM), 2012年

  
• 超微細粒アルミニウムの引張り変形中における転位密度その場測定

  足立大樹; 高木健; 宮嶋陽司; 辻伸泰

  軽金属学会大会講演概要, 2011年

  
• 巨大ひずみ加工による異種金属の混合を通じた非平衡ナノ材料の形成

  宮崎達也; 寺田大将; 宮嶋陽司; SURYANARAYANA C.; 村尾玲子; 横山嘉彦; 杉山和正; 梅本実; 戸高義一; 辻伸泰

  東北大学金属材料研究所金属ガラス総合研究センター共同利用研究報告書, 2011年

  
• 超微細粒アルミニウムの引張り変形中における転位密度変化

  足立大樹; 高木健; 宮嶋陽司; 佐藤眞直; 柴田暁伸; 寺田大将; 辻伸泰

  日本金属学会講演概要(CD-ROM), 2011年

  
• 超強圧延したFCC金属の集合組織に及ぼす積層欠陥エネルギーの影響

  佐藤祐也; 樫岡大輔; 宮嶋陽司; 足立大樹; 寺田大将; 辻伸泰

  日本金属学会講演概要(CD-ROM), 2011年

  
• 焼鈍時の付加応力が超微細粒組織を持つ純銅の軟化に及ぼす影響

  宮嶋陽司; 新垣隆史; 足立大樹; 辻伸泰; 藤居俊之; 尾中晋; 加藤雅治

  日本金属学会講演概要(CD-ROM), 2011年

  
• 工業用純アルミニウムの超強圧延集合組織

  宮嶋陽司; 樫岡大輔; 辻伸泰

  日本金属学会講演概要, 2010年

  
• {100}〈001〉純アルミニウム単結晶のARB法による超微細粒組織の発達

  生島亘; 樫原恵蔵; 宮嶋陽司; 寺田大将; 辻伸泰

  軽金属学会大会講演概要, 2009年

  
• 巨大ひずみ加工された工業用純アルミニウムの電気比抵抗

  宮嶋陽司; 辻伸泰; 小松伸也

  日本金属学会講演概要, 2009年

  
• 超微細結晶粒金属材料に関する研究

  辻 伸泰

  水曜会誌, 2009年10月

  
• 高延性化を目指した複相超微細粒鋼の創製

  辻 伸泰

  ふぇらむ : 日本鉄鋼協会会報 = Bulletin of the Iron and Steel Institute of Japan, 2007年10月01日

  
• 研究開発 新しい材料としての超微細粒アルミニウム合金 (特集:ここまできた自動車のアルミ化)

  辻 伸泰

  アルトピア, 2007年01月

  
• TEM/3DAP characterizations of severely deformed two phase nanostructures

  OHSAKI S.; OHKUBO T.; TSUJI N.; HONO Kazuhiro

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2003年09月01日

  
• ARBによる超微細粒材料の製造 (特集 塑性変形を利用した高付加価値加工)

  辻 伸泰

  バウンダリ-, 2003年08月

  
• The 21st RIS0 International Symposium on Materials Science

  辻 伸泰

  まてりあ : 日本金属学会会報, 2001年01月20日

  
• 巨大ひずみ加工された工業用純アルミニウムの等時焼鈍に伴う転位密度変化

  宮嶋陽司; 辻伸泰; 小松伸也; 波多聰; 光原昌寿; 中島英治

  日本金属学会講演概要, 2010年

  
• 巨大ひずみ加工されたアルミニウム中の結晶粒内転位密度のSTEMを用いた測定

  宮嶋陽司; 辻伸泰; 波多聰; 光原昌寿; 中島英治

  日本金属学会講演概要, 2009年

  
• 巨大ひずみ加工により作製された軽金属合金の特異な特性

  辻 伸泰

  大会講演概要, 2006年04月13日

  
• ARB法により作製された超微細粒Al-0.5%Si合金の時効挙動

  中川 惠友; 酒井 雅輝; 佐藤 泰彦; 金谷 輝人; 増井 稔明; 辻 伸泰

  大会講演概要, 2006年04月13日

  
• 微細粒軽量金属の研究動向 : メタラジーの視点から

  辻 伸泰

  まてりあ : 日本金属学会会報, 2004年05月20日

  
• Formation of Ultrafine Grained Structure in Carbon Steels without Severe or Heavy Plastic Deformation

  TSUJI Nobuhiro; UEJI Rintaro; KOIZUMI Yuichiro; MINAMINO Yoritoshi

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2003年09月01日

  
• Formation Mechanism of Ultrafine Grained Structures during Severe Plastic Deformation

  TSUJI Nobuhiro; KAMIKAWA Naoya; UEJI Rintaro; MINAMINO Yoritoshi

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2004年09月01日

  
• ARB法により作製された超微細結晶粒 1100 アルミニウムの高速変形に伴う組織変化

  豊田 崇; 辻 伸泰; 小泉 雄一郎; 南埜 宜俊; 桐谷 道雄; 小松 正雄; 山根 寿巳

  大会講演概要, 2001年10月01日

  
• Mechanical properties of 8011 aluminum alloy sheets Manufactured by Accumulative Roll Bonding Process(ARB)

  KIM Hyoung-Wook; KANG Suk-Bong; TSUJI Nobuhiro; MINAMINO Yoritoshi

  大会講演概要, 2001年10月01日

  
• 温間強圧延された5182アルミニウム合金における超微細結晶粒の形成

  辻 伸泰; 村上 武; 齋藤 好弘

  日本金屬學會誌, 1999年02月

  
• 繰り返し重ね接合圧延(ARB)によるバルク鉄鋼材料の結晶粒超微細化と高強度化

  辻 伸泰; 宇都宮 裕; 左海 哲夫; 齋藤 好弘

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 1998年09月01日

  
• 繰り返し重ね接合圧延によるバルク鉄鋼材料の結晶粒超微細化

  齋藤 好弘; 辻 伸泰; 谷川 修一; 宇都宮 裕

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 1998年03月05日

  
• ばね鋼SUP11Aにおけるオースフォームドベイナイト

  辻 伸泰; 菊田 あかね; 綾田 倫彦; 齋藤 好弘

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 1998年03月05日

  
• 溶湯直接圧延法によるAl-Mg合金薄板の集合組織制御

  永井 裕一; 辻 伸泰; 左海 哲夫; 齋藤 好弘

  大会講演概要, 1997年10月20日

  
• 熱間圧縮された18Crフェライト鋼単結晶の静的再結晶

  辻 伸泰; 新宮 豊久; 齋藤 好弘

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 1997年09月01日

  
• 18Crフェライト鋼の熱間変形組織に及ぼす初期結晶方位の影響

  辻 伸泰; 齋藤 好弘; 清貞 智会; 深田 隆仁

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 1996年09月28日

  
• 加工熱処理法としての溶湯直接圧延

  齋藤 好弘; 辻 伸泰; 佐海 哲夫; 池田 利哉; 楊 瀾; 中村 節; 永井 裕一

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 1996年09月28日

  
• 超微細粒組織を有するフェライト鋼の靭性

  辻 伸泰; 奥野 晋; 小泉 雄一郎; 南埜 宜俊

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2002年09月01日

  
• 249 IF鋼の摩擦攪拌接合継手強度に及ぼす初期結晶粒径の影響(摩擦撹拌接合(II))

  藤井 英俊; 高田 豊; 崔 霊; 辻 伸泰; 中田 一博; 野城 清

  溶接学会全国大会講演概要, 2005年08月20日

  
• 248 炭素鋼の摩擦攪拌接合(摩擦撹拌接合(II))

  藤井 英俊; 崔 霊; 辻 伸泰; 前田 将克; 中田 一博; 野城 清

  溶接学会全国大会講演概要, 2005年08月20日

  
• 208 炭素鋼の摩擦攪拌接合継手の機械的特性に及ぼす炭素量の影響(FSW (II),平成18年度春季全国大会)

  崔 霊; 藤井 英俊; 中田 一博; 野城 清; 辻 伸泰; 前田 将克; 池田 倫正; 松下 宗生

  溶接学会全国大会講演概要, 2006年03月23日

  
• 125 超微細粒銅の摩擦攪拌接合

  藤井 英俊; 高田 豊; 劉 会杰; 前田 将克; 辻 伸泰; 野城 清

  溶接学会全国大会講演概要, 2003年09月08日

  
• 電子ビーム積層造形された生体用Co-Cr-Mo合金中におけるγ→ε変態

  小泉雄一郎; 孫世海; 李云平; 山中謙太; 千葉晶彦; 寺田大将; 寺田大将; 辻伸泰

  日本金属学会講演概要(CD-ROM), 2014年

  
• 引張変形中のIn-situ XRD/DIC同時測定によるAl-Mg合金におけるセレーション発生時の転位密度変化

  足立大樹; 有吉開; 平田雅裕; PARK Myeong-heom; 辻伸泰

  軽金属学会大会講演概要, 2021年

  
• 604 FCC金属の巨大ひずみ加工による組織形成(材料と組織,オーガナイズドセッション)

  井口 将利; 石橋 寿啓; 鈴木 徹也; 友田 陽; 鈴木 裕士; 辻 伸泰; 堀田 善次

  茨城講演会講演論文集 : Ibaraki district conference, 2008年09月12日

  
• 溶湯直接圧延法により製造された A1050アルミニウム薄板の組織と集合組織

  永井 裕一; 辻 伸泰; 左海 哲夫; 斎藤 好弘

  日本金屬學會誌, 1996年08月20日

  
• 溶湯直接圧延法によるAl-Si合金薄板の製造

  齋藤 好弘; 辻 伸泰; 足立 和泰; 岡田 昌哉

  塑性と加工, 1996年03月20日

  
• 溶湯直接圧延法による工業用純アルミニウム薄板の製造

  齋藤 好弘; 池田 利哉; 辻 伸泰

  塑性と加工, 1995年11月20日

  
• Nanomaterials by severe plastic deformation: review of historical developments and recent advances

  Kaveh Edalati; Andrea Bachmaier; Victor A. Beloshenko; Yan Beygelzimer; Vladimir D. Blank; Walter J. Botta; Krzysztof Bryła; Jakub Čížek; Sergiy Divinski; Nariman A. Enikeev; Yuri Estrin; Ghader Faraji; Roberto B. Figueiredo; Masayoshi Fuji; Tadahiko Furuta; Thierry Grosdidier; Jenő Gubicza; Anton Hohenwarter; Zenji Horita; Jacques Huot; Yoshifumi Ikoma; Miloš Janeček; Megumi Kawasaki; Petr Král; Shigeru Kuramoto; Terence G. Langdon; Daniel R. Leiva; Valery I. Levitas; Andrey Mazilkin; Masaki Mito; Hiroyuki Miyamoto; Terukazu Nishizaki; Reinhard Pippan; Vladimir V. Popov; Elena N. Popova; Gencaga Purcek; Oliver Renk; Ádám Révész; Xavier Sauvage; Vaclav Sklenicka; Werner Skrotzki; Boris B. Straumal; Satyam Suwas; Laszlo S. Toth; Nobuhiro Tsuji; Ruslan Z. Valiev; Gerhard Wilde; Michael J. Zehetbauer; Xinkun Zhu

  Materials Research Letters, 2022年

  
• Deformation behavior study in a model dual phase system of copper–martensitic steel using in-situ synchrotron X-ray diffraction

  M. Teimouri; A. Godfrey; B. Yu; N. Tsuji

  IOP Conf. Series: Materials Science and Engineering, 2020年, 査読有り

  
• Deformation microstructures and strength of face-centered cubic high/medium entropy alloys

  S. Yoshida; T. Ikeuchi; Y. Bai; A. Shibata; N. Hansen; X. Huang; N. Tsuji

  Proceedings of the 40th Riso International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D, 2019年09月, 査読有り

  
• In-situ neutron diffraction study on the deformation of a TRIP-assisted multi-phase steel composed of ferrite, austenite and martensite

  A. Lavakumar; M.H. Park; S. Gao; A. Shibata; Y. Okitsu; W. Gong; S. Harjo; N. Tsuji

  Proceedings of the 40th Riso International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D, 2019年09月, 査読有り

  
• Linking local and heterogeneous deformation behavior to global deformation of materials by in-situ experimental techniques

  N. Tsuji; M. Park; S. Gao; Y. Bai; Y. Chong

  Proceedings of the 40th Riso International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D, 2019年09月, 査読有り

  
• Evaluation of serration behaviors in 22Mn-0.6C steel with various grain sizes

  Sukyoung Hwang; Yu Bai; Myeong-Heom Park; Akinobu Shibata; Nobuhiro Tsuji

  Proceedings of 4th International Conference on Medium and High Manganese Steel, 2019年04月, 査読有り

  
• Effect of Thermo-Mechanical Processing on Microstructure Evolution and Mechanical Property in 3Mn-0.1C Medium Manganese Steel

  Feifei Hou; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji

  Proceedings of 4th International Conference on Medium and High Manganese Steel,, 2019年01月, 査読有り

  
• その場中性子回折による鉄鋼材料の加工熱処理中おける相変態の定量評価

  GONG Wu; GONG Wu; HARJO Stefanus; SHIBATA Akinobu; TOMOTA Yo; SHINOZAKI Tomoya; TSUJI Nobuhiro

  X線材料強度に関する討論会講演論文集, 2019年

  
• Reverse transformation behavior from martensite to austenite in Ni-C steels studied by in-situ SEM/EBSD analysis

  Ooura N; Fujiwara K; Kawano K; Tsuji N

  Materials Science and Technology 2018, MS and T 2018, 2019年

  
• Unique Effect of Carbon Addition on Development of Deformation and Recrystallization Textures in Heavily Cold-Rolled Fe-3%Si Alloys

  Masanori Takenaka; Yasuyuki Hayakawa; Nobuhiro Tsuji

  Materials Science Forum, 2018年12月, 査読有り

  
• Microstructure Evolution and Change in Mechanical Properties of Medium Mn Steels during Thermomechanical Processing

  Fei Fei Hou; Atsushi Ito; Yu Bai; Akinobu Shibata; Nobuhiro Tsuji

  Materials Science Forum, 2018年12月, 査読有り

  
• Effect of Grain Size on Mechanical Properties of Mg-0.3at.%Y Dilute Alloy

  Rui Xiao Zheng; Ichiro Kawarada; Wu Gong; Akinobu Shibata; Hidetoshi Somekawa; Shigenobu Ogata; Nobuhiro Tsuji

  Materials Science Forum, 2018年12月, 査読有り

  
• In-situ neutron diffraction study on tensile deformation behaviors of UFG Fe-24Ni-6Al-0.4C alloy containing B2 intermetallic compounds

  GAO Si; GONG Wu; SHIBATA Akinobu; TSUJI Nobuhiro; HARJO Stefanus

  日本金属学会講演概要(CD-ROM), 2018年09月05日

  
• In Situ Neutron Diffraction Study on Microstructure Evolution During Thermo-Mechanical Processing of Medium Manganese Steel

  Yoshihiko Nakamura; Akinobu Shibata; Wu Gong; Stefanus Harjo; Takuro Kawasaki; Atsushi Ito; Nobuhiro Tsuji

  Proceedings of the International Conference on Martensitic Transformations: Chicago, 2018年04月, 査読有り

  
• 企画にあたって

  乾 晴行; 辻 伸泰

  まてりあ, 2018年01月, 査読有り

  
• B2金属間化合物を含むUFG Fe-24Ni-6Al-0.4C合金の引張変形挙動に関するその場中性子回折調査

  GAO Si; GONG Wu; SHIBATA Akinobu; TSUJI Nobuhiro; HARJO Stefanus

  日本金属学会講演概要(CD-ROM), 2018年

  
• Effect of Grain Sizes on Nanoindentation Induced Plasticity Initiation in Interstitial Free Steel

  Hongxing Li; Si Gao; Ruzic Jovana; Nobuhiro Tsuji; Takahito Ohmura

  Proceedings of 6th International Conference on Advanced Steels, 2018年, 査読有り

  
• Effects of Hydrogen on Deformed Microstructure in 2Mn-0.1C Ferritic Steel

  Kazuho Okada; Akinobu Shibata; Wu Gong; Nobuhiro Tsuji

  Proceedings of 6th International Conference on Advanced Steels, 2018年, 査読有り

  
• Reason for High Strength and Good Ductility in Dual Phase Steels

  Myeong-heom Park; Nobuhiro Tsuji

  Proceedings of 6th International Conference on Advanced Steels, 2018年, 査読有り

  
• Mechanical Properties of Al-Added High-Mn Austenitic Steels with Various Grain Sizes

  Yu Bai; Takumi Nakata; Sukyoung Hwang; Nobuhiro Tsuji

  Proceedings of 6th International Conference on Advanced Steels, 2018年, 査読有り

  
• Effect of grain size on tensile behavior of Fe-24Ni-0.3C metastable austenitic steel studied by in-situ neutron diffraction

  MAO Wenqi; GAO Si; GONG Wu; GONG Wu; GONG Wu; PARK Myeong‐Hoem; PARK Myeong‐Hoem; YU Bai; YU Bai; SHIBATA Akinobu; SHIBATA Akinobu; TSUJI Nobuhiro; TSUJI Nobuhiro

  日本金属学会講演概要(CD-ROM), 2017年08月23日

  
• 中Mn鋼の加工熱処理に伴うオーステナイト逆変態挙動のその場中性子線解析

  中村慶彦; 柴田曉伸; バイ イ; 辻伸泰; GONG Wu; HARJO Stefanus; 川崎卓郎

  材料とプロセス(CD-ROM), 2017年08月21日

  
• 中Mn鋼の加工熱処理に伴う組織形成過程のその場中性子線解析

  中村慶彦; 柴田曉伸; バイ イ; 辻伸泰; WU Gong; HARJO Stefanus; 川崎卓郎

  材料とプロセス(CD-ROM), 2017年03月31日

  
• Investigation of twinning and de-twinning in AZ31 alloy by in-situ neutron diffraction and EBSD

  GONG Wu; GONG Wu; ZHENG Ruixiao; HARJO Stefanus; AIZAWA Kazuya; SHIBATA Akinobu; SHIBATA Akinobu; TSUJI Nobuhiro; TSUJI Nobuhiro

  日本金属学会講演概要(CD-ROM), 2017年03月01日

  
• Mechanical properties and deformation mechanism of Mg–Y alloy with various grain sizes

  Ichiro Kawarada; Ruixiao Zheng; Akinobu Shibata; Hidetoshi Somekawa; Shigenobu Ogata; Nobuhiro Tsuji

  Minerals, Metals and Materials Series, 2017年, 査読有り

  
• 超微細粒組織を有するDP鋼の局所変形挙動

  朴明験; 柴田曉伸; 辻伸泰; HARJO Stefanus; 川崎卓郎

  日本金属学会講演概要(CD-ROM), 2017年

  
• in-situ中性子回折及びEBSDによるAZ31中の双晶と脱双晶の研究

  GONG Wu; GONG Wu; ZHENG Ruixiao; HARJO Stefanus; AIZAWA Kazuya; SHIBATA Akinobu; SHIBATA Akinobu; TSUJI Nobuhiro; TSUJI Nobuhiro

  日本金属学会講演概要(CD-ROM), 2017年

  
• Effect of grain size on mechanical properties of silicon-added high-Mn TWIP steel

  Sukyoung Hwang; Yu Bai; Si Gao; Akinobu Shibata; Nobuhiro Tsuji

  International Symposium on New Developments in Advanced High-Strength Sheet Steels, 2017年

  
• Deformation mechanism of ultrafine-grained high-Mn austenitic TWO∗ steel

  Hiroki Kitamura; Yu Bai; Yanzhong Tian; Akinobu Shibata; Nobuhiro Tsuji

  International Symposium on New Developments in Advanced High-Strength Sheet Steels, 2017年

  
• Effect of annealing temperature on susceptibility to hydrogen embrittlement of interstital-free steel with ultra-fine grain structure

  T. Haruna; Y. Nakagawa; Y. Hirohata; D. Terada; N. Tsuji

  ICF 2017 - 14th International Conference on Fracture, 2017年

  
• Effects of grain refinement on mechanical properties of dual-phase low-carbon steel

  Myeong Heom Park; Akinobu Shibata; Nobuhiro Tsuji

  International Symposium on New Developments in Advanced High-Strength Sheet Steels, 2017年

  
• In situ tracking of kinetics for phase transformation during Q&P process below Ms in 0.3C-2Mn-2Si steel

  GONG Wu; GONG Wu; HARJO Stefanus; ZHENG Ruixiao; TOMOTA Yo; SHINOZAKI Tomoya; TSUJI Nobuhiro

  Proceedings Book. International Symposium on Steel Science, 2017年

  
• Ferrite transformation and mechanical properties of medium manganese steels

  A. Ito; Y. Matsui; Y. Bai; A. Shibata; N. Tsuji

  Proceedings of the 3rd International Conference on High Manganese Steels, 2016年11月, 査読有り

  
• Hydrogen-related crack propagation in an ultrafine-grained high-Mn TWIP steel

  Y. Bai; Y. Momotani; A. Shibata; N. Tsuji

  Proceedings of the 3rd International Conference on High Manganese Steels, 2016年11月, 査読有り

  
• Deformation mechanism of high-Mn austenitic steels with fully recrystallized ultrafine grained structures

  H. Kitamura; Y. Bai; Y.Z. Tian; R. Saha; A. Shibata; N. Tsuji

  Proceedings of the 3rd International Conference on High Manganese Steels, 2016年11月, 査読有り

  
• 粒径の異なるDP鋼における引張変形中の応力分配挙動

  PARK Myeong‐heom; 柴田曉伸; 辻伸泰; GONG Wu; HARJO Stefanus; 川崎卓郎

  日本金属学会講演概要(CD-ROM), 2016年09月07日

  
• 動的フェライト変態における元素分配挙動のその場中性子線解析

  柴田曉伸; 辻伸泰; 竹田泰成; GONG Wu; HARJO Stefanus; 川崎卓郎

  材料とプロセス(CD-ROM), 2016年09月01日

  
• Mechanical Properties of High-Mn Austenitic Steels with Fully Recrystallized Ultrafine Grained Structures

  H. Kitamura; Y. Bai; Y.Z. Tian; R. Saha; A. Shibata; N. Tsuji

  Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, 2016年08月, 査読有り

  
• Tensile Behavior of SUS304L Stainless Steel Having Ultrafine Grain Sizes

  W.Q. Mao; S. Gao; A. Shibata; N. Tsuji

  Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, 2016年08月, 査読有り

  
• Effect of the stress concentration on the hydrogen embrittlement in Fe-0.2C martensitic steels

  T. Yonemura; Y. Momotani; A. Shibata; S. Takagi; N. Tsuji

  Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, 2016年08月, 査読有り

  
• Effect of Deformation Condition on Hydrogen Embrittlement Behavior in Low-carbon Martensitic Steel

  Y. Momotani; A. Shibata; N. Tsuji

  Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, 2016年08月, 査読有り

  
• Microstructural investigation of a hot compressed ZK60 Mg alloy

  T. Bhattacharjee; M. Joshi; S. Gao; H. Li; A. Shibata; T. Sasaki; K. Hono; N. Tsuji

  Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, 2016年08月, 査読有り

  
• Relationship between Bain unit size and low-temperature toughness in low-carbon bainitic steel

  M. Tsuboi; Y. Kobuchi; A. Shibata; N. Tsuji

  Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, 2016年08月, 査読有り

  
• Effect of Deformation Conditions on Microstructure Evolution in Interstitial Free Steel Hot-Deformed by Torsion

  R. Gholizadeh; A. Shibata; N. Tsuji

  Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, 2016年08月, 査読有り

  
• Hydrogen-related Crack Propagation in an Ultrafine-grained 22Mn-0.6C TWIP Steel

  Y. Bai; Y. Momotani; A. Shibata; N. Tsuji

  Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, 2016年08月, 査読有り

  
• Discontinuous yielding and strengthening mechanism in ultra-fine grained Al

  S. Gao; K. Yoshino; D. Terada; A. Shibata; Y. Kaneko; N. Tsuji

  Proceedings of the 9th Pacific Rim International Conference on Advanced Materials and Processing, 2016年08月, 査読有り

  
• Effects of Orientation on Anisotropic Tensile Deformation Behavior in Cold-Rolled and Annealed Pure Titanium

  Nahoko Saji; Takahiro Kunimine; Akinobu Shibata; Yoshinori Ito; Nobuhiro Tsuji

  Proceedings of the 9th Pacific Rim International Congress on Advanced Materials and Processing (PRICM9), 2016年08月, 査読有り

  
• Low rotation Speed Friction stir spot welding of 6061 Al alloys

  Yufeng Sun; Yoshiaki Morisada; Hidetoshi Fujii; Nobuhiro Tsuji

  11th International Symposium on Friction Stir Welding, 2016年05月

  
• Friction Stir Spot Welding of 6061-Al alloy at low welding temperature

  孫 玉峰; 森貞 好昭; 藤井 英俊; 辻 伸泰

  溶接学会全国大会講演概要, 2016年01月, 査読有り

  
• 粒径の異なるDP鋼における引張変形中の応力分配挙動

  PARK Myeong-heom; 柴田曉伸; 辻伸泰; GONG Wu; HARJO Stefanus; 川崎卓郎

  日本金属学会講演概要(CD-ROM), 2016年

  
• The effect of initial microstructure on the mechanical properties of Bi-lamellar Ti-6Al-4V

  Yan Chong; Nobuhiro Tsuji

  TMS Annual Meeting, 2016年

  
• Strength and ductility of ultrafine grained ZKX600 mg alloy

  Ruixiao Zheng; Tilak Bhattacharjee; Akinobu Shibata; Taisuke Sasaki; Kazuhiro Hono; Nobuhiro Tsuji

  Proceedings of the 6th International Conference on Recrystallization and Grain Growth, ReX and GG 2016, 2016年, 査読有り

  
• Grain refinement and texture evolution in highly deformed ferrite during high-temperature torsion deformation of if steel

  Reza Gholizadeh; Akinobu Shibata; Nobuhiro Tsuji

  Proceedings of the 6th International Conference on Recrystallization and Grain Growth, ReX and GG 2016, 2016年, 査読有り

  
• その場中性子回折による動的フェライト変態挙動の解析

  柴田曉伸; 辻伸泰; 朴魯謹; 山崎慎太郎; 林杉; ステファヌス ハルヨ; 川崎卓郎

  材料とプロセス(CD-ROM), 2015年03月01日

  
• 高強度・高延性を有するFe-Ni-Al-C合金冷間圧延材の引張変形挙動

  小森俊輝; 小森俊輝; 柴田曉伸; 辻伸泰; 古田忠彦; 倉本繁; 友田陽; HARJO Stefanus

  日本金属学会講演概要(CD-ROM), 2015年

  
• 高強度・高延性を有するFe-Ni-Al-C合金冷間圧延材の引張変形その場中性子線解析

  小森俊輝; 柴田曉伸; 古田忠彦; 倉本繁; 友田陽; HARJO Stefanus; 辻伸泰

  日本金属学会講演概要(CD-ROM), 2015年

  
• 鋼の高温加工熱処理過程で生じる固相反応の中性子その場解析

  辻伸泰; 柴田曉伸; 寺田大将; 朴魯謹; 山崎慎太郎; 林杉; HARJO Stefanus; 川崎卓郎

  物構研サイエンスフェスタ要旨集, 2015年

  
• Ultrafine CrMnFeCoNi High-Entropy Alloy Fabricated by High-Pressure Torsion and Annealing

  PARK Nokeun; SHIBATA Akinobu; TERADA Daisuke; TSUJI Nobuhiro; YOKOYAMA Yoshihiko; LIAW Peter K

  日本金属学会講演概要(CD-ROM), 2014年03月07日

  
• Microstructural evolution of ferrite grains during dynamic transformation in 10Ni-0.1C steel

  Lijia Zhao; Nokeun Park; Akinobu Shibata; Nobuhiro Tsuji

  TMS Annual Meeting, 2014年, 査読有り

  
• Improvement of hydrogen-related fracture resistance in martensitic steel through refinement of prior austenite grains

  A. Shibata; T. Matsuoka; N. Tsuji

  Steely Hydrogen Conference Proceedings 2014, 2014年, 査読有り

  
• Hydrogen Embrittlement Behaviors of Ultrafine-Grained TWIP Steel

  Y. Bai; A. Shibata; D. Terada; N. Tsuji

  Proc. of the 2nd Int. Conf. on High Manganese Steels (HMnS 2014), 2014年, 査読有り

  
• 第14回KIM/JIMシンポジウム開催報告

  辻 伸泰

  Materia Japan, 2013年01月

  
• Microstructure and mechanical properties of spot Friction stir welded Ultrafine grained 1050 Al and 6061-T6 Al alloys

  孫 玉峰; 藤井 英俊; 辻 伸泰

  溶接学会全国大会講演概要, 2013年01月

  
• 医療用異種Ti合金の重ね圧延(ARB)による組織と力学特性

  藤谷渉; 大橋知弘; 大橋知弘; 寺田大将; 辻伸泰; 芹澤愛; 中野貴由

  日本金属学会講演概要(CD-ROM), 2013年

  
• Aging behavior of ultrafine grained commercial A1-Mg-Si alloy severely deformed by ARB process

  Daisuke Terada; Yoma Kaneda; Zenji Horita; Kenji Matsuda; Takumi Hamaoka; Shoichi Hirosawa; Nobuhiro Tsuji

  8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 2013年

  
• Grain refinement in pure Mg and Mg-Zn alloys during hot compression test

  Y. Fukuta; D. Terada; T. Sasaki; K. Hono; N. Tsuji

  8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 2013年

  
• Microstructural features and age hardening in an Al-Mg-Ga sacrificial anode alloy

  Myeong Heom Park; Daisuke Terada; Manuel Marya; Nobuhiro Tsuji

  8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 2013年

  
• Crystallographic features of hydrogen-related Fracture in martensitic carbon steels

  A. Shibata; T. Murata; N. Tsuji

  Proceedings of the International Symposium on New Developments in Advanced High-Strength Sheet Steels, 2013年, 査読有り

  
• Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel

  Y. Momotani; A. Shibata; D. Terada; N. Tsuji

  Proceedings of the International Symposium on New Developments in Advanced High-Strength Sheet Steels, 2013年, 査読有り

  
• Correlation between deformation-induced martensitic transformation and mechanical properties in TRIP phenomenon

  M. Chen; S. Gao; A. Shibata; D. Terada; N. Tsuji

  Proceedings of the International Symposium on New Developments in Advanced High-Strength Sheet Steels, 2013年, 査読有り

  
• Relationship between low-temperature embrittlement and microstructure of martensite in low-carbon martensitic steel

  M. Tsuboi; A. Shibata; D. Terada; N. Tsuji

  Proceedings of the International Symposium on New Developments in Advanced High-Strength Sheet Steels, 2013年, 査読有り

  
• Characteristics of deformation induced martensite in SUS304 austenitic stainless steel deformed at RT and -60°C

  M. Chen; S. Gao; D. Terada; A. Shibata; N. Tsuji

  Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing, 2013年, 査読有り

  
• Effect of prior austenite grain size on hydrogen embrittlement behaviors in 8Ni-0.1C steel

  Akinobu Shibata; Takahiro Matsuoka; Nobuhiro Tsuji

  8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 2013年, 査読有り

  
• Martensitic transformation from nanocrystalline austenite in Fe-Ni alloys fabricated by electrodeposition

  Fumitaka Ichikawa; Akinobu Shibata; Hiroki Adachi; Tohru Yamasaki; Nobuhiro Tsuji

  8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 2013年

  
• ARBを施した工業用純Tiの集合組織と疲労破壊特性

  北原弘基; 松下翔; 津志田雅之; 安藤新二; 辻伸泰

  日本金属学会講演概要(CD-ROM), 2012年09月03日

  
• ARBを施した工業用純Tiの集合組織と疲労破壊特性

  北原弘基; 松下翔; 津志田雅之; 安藤新二; 辻伸泰

  材料とプロセス(CD-ROM), 2012年09月01日

  
• EBSDによる鋼のマルテンサイトの組織解析

  北原弘基; 辻伸泰

  日本熱処理技術協会講演大会講演概要集, 2011年12月

  
• ワイヤブラッシング加工を施したMg合金の組織と機械的性質

  北原弘基; 矢田卓也; 津志田雅之; 安藤新二; 辻伸泰

  日本金属学会講演概要, 2011年04月20日

  
• ワイヤブラッシング加工を施したMg合金の組織と機械的性質

  北原弘基; 矢田卓也; 津志田雅之; 安藤新二; 辻伸泰

  材料とプロセス(CD-ROM), 2011年03月01日

  
• 金属材料組織学

  松原英一郎; 田中功; 大谷博司; 安田秀幸; 沼倉宏; 古原忠; 辻伸泰

  ,, p. pp 212, 2011年

  
• ARB加工ままの純Alとその焼鈍材の定ひずみ変形挙動

  北原弘基; 堀家拓也; 津志田雅之; 安藤新二; 辻伸泰

  日本金属学会講演概要, 2010年09月25日

  
• ARB加工された超微細粒Al中の転位密度変化の測定

  高木健; 宮嶋陽司; 辻伸泰; 寺田大将; 足立大樹; 松原英一郎; 沼倉宏

  日本金属学会講演概要, 2010年09月25日

  
• Evolution of the Microstructure of a {100} <001> Pure Aluminum Single Crystal during Severe Plastic Deformation

  K.Kashihara; W.Ikushima; Y.Miyajima; D.Terada; N.Tsuji

  Proc. of ICAA 12, The Japan Institute of Light Metals The 12th International Conference on Aluminium Alloys (ICAA12), 2010年09月, 査読有り

  
• Microstructure and Hardness Distribution of Friction Stir Welded 1050 Al and IF Steel with Different Original Grain Size

  NAKATA Kazuhiro; TSUJI Nobuhiro; NOGI Kiyoshi; SUN Yufeng; FUJII Hidetoshi; TAKADA Yutaka

  Transactions of JWRI, 2009年12月

  
• ARBにより作製した超微細粒材料の疲労破壊

  北原弘基; 堀家拓也; 松下翔; 宮原良輔; 津志田雅之; 安藤新二; 辻伸泰

  日本金属学会講演概要, 2009年09月15日

  
• ワイヤブラッシング表層強加工によるMg合金の表層ナノ結晶化

  北原弘基; 橋口史; 堀家拓也; 宮原良輔; 津志田雅之; 安藤新二; 辻伸泰

  日本金属学会講演概要, 2009年03月28日

  
• ワイヤブラッシング表層強加工によるMg合金の表層ナノ結晶化

  北原弘基; 橋口史; 堀家拓也; 宮原良輔; 津志田雅之; 安藤新二; 辻伸泰

  材料とプロセス(CD-ROM), 2009年03月01日

  
• Microstructure observation of aluminum bicrystals with symmetrical tilt grain boundaries deformed in compression

  T.Tanaka; D.Terada; K.Kashihara; N.Tsuji

  X III International Conference on Intergranular and Interphase Boundaries in Materials (iib 2010), 2008年07月

  
• ARBにより作製した超微細粒純Alの疲労特性

  宮原良輔; 堀家拓也; 北原弘基; 高田尚記; 寺田大将; 辻伸泰; 津志田雅之; 安藤新二; 頓田英機

  日本金属学会講演概要, 2008年03月26日

  
• ARBアルミニウムのX線回折実験と超音波計測および加工導入された蓄積エネルギー評価法の新たな試み

  市坪哲; 松原英一郎; 雪谷俊介; 平井浩介; 寺田大将; 辻伸泰

  日本金属学会講演概要, 2008年03月26日

  
• Microstructure and mechanical properties of Al-0.5 at.% X (=Si, Ag, Mg) alloys highly deformed by ARB process

  Daisuke Terada; Toshiaki Masui; Naoya Kamikawa; Nobuhiro Tsuji

  Materials Science Forum, 2008年

  
• 超微細粒準安定オーステナイト鋼の機械的性質

  前川太郎; 北原弘基; 高田尚記; 辻伸泰

  材料とプロセス, 2007年09月01日

  
• 超微細粒純Tiの疲労き裂進展挙動

  内門功輔; 牧野純一; 北原弘基; 安藤新二; 頓田英機; 津志田雅之; 辻伸泰

  日本金属学会講演概要, 2007年03月27日

  
• 超微細粒IF鋼の高速変形特性

  興津貴隆; 高田尚記; 辻伸泰; 北原弘基

  材料とプロセス, 2007年03月01日

  
• ARBにより巨大ひずみ加工を施した工業用純Tiの焼鈍に伴う組織と機械的特性質の変化

  寺田大将; 井上誠哉; 北原弘基; 辻伸泰

  材料とプロセス, 2007年03月01日

  
• Evolution of antiphase domains and γ lamellae in Ti-39at% Al single crystals

  Yuichiro Koizumi; Kazuki Iwamoto; Takayuki Tanaka; Yoritoshi Minamino; Nobuhiro Tsuji

  Materials Research Society Symposium Proceedings, 2007年

  
• Ti-39at%Al単結晶中の逆位相領域/γプレート混合組織形成に及ぼす熱処理前圧延加工の効果

  田中 尭之; 小泉 雄一郎; 南埜 宜俊; 辻 伸泰

  高温学会誌, 2006年12月27日

  
• Fe/Al積層体のARB法を用いたバルクメカニカルアロイングの試み

  中村拓郎; 北原弘基; 辻伸泰

  日本金属学会講演概要, 2006年09月16日

  
• 超微細オーステナイトから生成するマルテンサイト組織とその強度

  北原弘基; 前川太郎; 辻伸泰

  日本機械学会年次大会講演論文集, 2006年09月15日

  
• 強ひずみ加工されたFe‐Cr‐Ni合金のマルテンサイト変態と機械的性質

  前川太郎; 北原弘基; 辻伸泰; 小泉雄一郎; 南埜宜俊

  材料とプロセス, 2006年09月01日

  
• EBSDデータを用いたバリアント解析プログラムの開発(単純成分系低温大圧下細粒熱延鋼板への適用例)

  森本敬治; 吉田冬樹; 竹士伊知郎; 北原弘基; 辻伸泰

  材料とプロセス, 2006年03月01日

  
• Correlation between texture and structure in high purity Al processed by ARB

  Xiaoxu Huang; Naoya Kamikawa; Nobuhiro Tsuji; Niels Hansen

  TMS Annual Meeting, 2006年

  
• Possibility to manage both high strength and ductility in ultrafine grained structural metallic materials

  Nobuhiro Tsuji; Rintaro Ueji; Yoshinori Ito; Hyoung Wook Kim

  TMS Annual Meeting, 2006年

  
• 構造機能先進材料デザイン研究拠点の形成 強ひずみ加工により作製された超微細粒オーステナイトからのマルテンサイト変態

  北原弘基; 辻伸泰

  大阪大学21世紀COEプログラム「構造・機能先進材料デザイン研究拠点の形成」 平成17年度 成果報告書 第4回シンポジウム資料集, 2006年

  
• Ti-39at%Al単結晶における逆位相領域(APD)/γプレート複合ナノ組織の形成

  岩本 和樹; 小泉 雄一郎; 南埜 宜俊; 辻 伸泰

  高温学会誌, 2005年11月28日

  
• D0_<19>型規則構造を有する金属間化合物Ti_3Al中のAuの拡散

  田中 尭之; 小泉 雄一郎; 南埜 宜俊; 辻 伸泰

  高温学会誌, 2005年05月20日

  
• Fe‐28.5at.%Ni合金におけるレンズマルテンサイトのバリアント選択

  北原弘基; 上田正人; 辻伸泰; 南埜宜俊

  日本金属学会講演概要, 2005年03月29日

  
• ARBと焼鈍を施された高純度アルミニウムの超微細組織と強度の関係

  紙川 尚也; 辻 伸泰; HUANG Xiaoxu; HANSEN Niels; 南埜 宜俊

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2005年03月01日

  
• 超微細粒アルミニウムの室温におけるひずみ速度依存変形のメカニズム

  辻 伸泰; 菱田 元樹; 紙川 尚也; 南埜 宜俊

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2005年03月01日

  
• TEM/CBED法による超微細粒アルミニウムの内部応力場測定

  上路 林太郎; 谷口 潤一郎; 角田 直人; 田中 克志; 辻 伸泰

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2005年03月01日

  
• Zr/Cu積層材の強ひずみ加工による非平衡化

  加藤 志朗; 辻 伸泰; 南埜 宜俊; 大崎 智; 大久保 忠勝; 宝野 和博

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2005年03月01日

  
• Yield Strength of Ultrafine Grained Metallic Materials Fabricated by Severe Plastic Deformation

  TSUJI Nobuhiro; KAMIKAWA Naoya; UEJI Rintaro; HUANG Xiaoxu; HANSEN Niels; MINAMINO Yoritoshi

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2005年03月01日

  
• D0_<19>型規則構造を有するTi_3Al中のSiの拡散

  南埜 宜俊; 榊原 洋平; 小泉 雄一郎; 辻 伸泰

  高温学会誌, 2005年01月28日

  
• Effect of excess vacancies on antiphase domain growth in Fe3Al

  Y. Koizumi; T. Hagiwara; Y. Minamino; N. Tsuji

  Materials Research Society Symposium Proceedings, 2005年

  
• 鋼のマルテンサイトのEBSP法による結晶学的解析

  北原弘基; 辻伸泰; 南埜宜俊

  材料集合組織研究会資料, 2005年

  
• Formation mechanism of ultrafine grained structure in severe plastic deformation of low carbon steel"

  N.Tsuji; N.Kamikawa; R.Ueji

  Proceedings of International Symposium on Ultrafine Grained Structures (ISUGS 2005), 2005年

  
• Mechanical properties of friction stir welds of ultrafine grained steel and other materials

  Hidetoshi Fujii; Ling Cui; Nobuhiro Tsuji; Rintaro Ueji; Kazuhiro Nakata; Kiyoshi Nogi

  Proceedings of the International Offshore and Polar Engineering Conference, 2005年

  
• Ti_3Alの逆位相領域(APD)成長に及ぼすSi添加の影響

  岩本 和樹; 小泉 雄一郎; 南埜 宜俊; 辻 伸泰

  高温学会誌, 2004年07月30日

  
• NS-SPD ( Near Surface - Sever Plastic Deformation ) により表層ナノ結晶化されたIF鋼とZnとの反応性

  中溝 慶威; 南埜 宜俊; 辻 伸泰; 小泉 雄一郎; 佐藤 正英

  高温学会誌, 2004年07月30日

  
• Fe‐28.5at.%Ni合金の超微細オーステナイトから生じるマルテンサイトの結晶学的解析

  北原弘基; 辻伸泰; 南埜宜俊

  日本金属学会講演概要, 2004年03月30日

  
• Martensite Transformed from Ultrafine Grained Austenite Fabricated by ARB Process in 29.6wt%Ni Steel

  Hiromoto Kitahara; Nobuhiro Tsuji; Takashi Kimura; Yuichiro Koizumi; Yoritoshi Minamino

  Proc. of the 2nd Int. Conf. on Advanced Structural Steels (ICASS), April 14-16, 2004, Shanghai, 2004年, 査読有り

  
• EBSP法による鋼のマルテンサイトの結晶学的解析

  北原弘基; 上路林太郎; 辻伸泰; 南埜宜俊

  日本金属学会講演概要, 2003年10月11日

  
• 強ひずみ加工されたFe‐29at.%Ni合金オーステナイトから生じるマルテンサイト組織

  北原弘基; 木村孝; 辻伸泰; 小泉雄一郎; 南埜宜俊

  日本金属学会講演概要, 2003年10月11日

  
• ARBによる加工後焼鈍された極低炭素IF鋼の組織と機械的性質に及ぼすひずみ量の影響

  紙川尚也; 辻伸泰; 齋藤好弘

  鉄と鋼, 2003年02月

  
• Effect of Antiphase Domain Boundaries on Prism Slip in Ti3Al Single Crystals

  Y. Koizumi; Y. Minamino; N. Tsuji; T. Nakano; Y. Umakoshi

  Materials Research Society Symposium - Proceedings, 2003年

  
• Corrosion behavior of ultra-fine grained Al and Al-2%Cu alloy produced by Accumulative Roll-Bonding (ARB) process

  Shinji Fujimoto; Taku Iwata; Nobuhiro Tsuji; Yoritoshi Minamino

  Proceedings - Electrochemical Society, 2003年

  
• Mechanical properties of ultrafine grained aluminum and ultra low carbon steel produced by ARB process

  N. Tsuji; Y. Ito; Y. Koizumi; Y. Minamino; Y. Saito

  TMS Annual Meeting, 2002年

  
• Mechanical properties of nano-structured plain low-carbon steels produced by conventional cold-rolling and annealing of martensite starting microstructure

  R. Ueji; N. Tsuji; Y. Minamino; Y. Koizumi; Y. Saito

  TMS Annual Meeting, 2002年, 査読有り

  
• Effect of Al concentration on growth of antiphase domains in Ti3Al

  Y. Koizumi; H. Katsumura; Y. Minamino; N. Tsuji

  Materials Research Society Symposium - Proceedings, 2002年, 査読有り

  
• ARBにより種々のひずみ量まで強ひずみ加工された極低炭素IF鋼の焼鈍に伴う組織と機械的性質の変化

  紙川 尚也; 辻 伸泰; 齋藤 好弘

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2001年09月01日

  
• 強ひずみ加工された36Niオーステナイト鋼の焼鈍に伴う組織と機械的性質の変化

  辻 伸泰; 齋藤 好弘; 澤田 映

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2001年09月01日

  
• マルテンサイトの冷間圧延と温間焼鈍によるJIS-SM490鋼の結晶粒超微細化

  辻 伸泰; 南埜 宜俊; 小泉 雄一郎; 斎藤 好弘; 上路 林太郎

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2001年09月01日

  
• マルテンサイトの冷間圧延と温間焼鈍により作製された超微細結晶粒組織を持つ普通低炭素鋼JIS-SS400の機械的性質

  上路 林太郎; 辻 伸泰; 斎藤 好弘; 南埜 宜俊; 小泉 雄一郎

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2001年09月01日

  
• 普通低炭素鋼(JIS-SS400)マルテンサイトの冷間圧延と温間焼鈍による超微細結晶粒組織の形成

  上路 林太郎; 辻 伸泰; 斎藤 好弘

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2001年09月01日

  
• 低炭素鋼マルテンサイトの高温加工による微細結晶粒の形成

  辻 伸泰; KRAUSS George; 斎藤 好弘

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2001年09月01日

  
• フェライト鋼の強ひずみ加工における超微細粒組織の形成機構

  辻 伸泰; 上路林 太郎; 齋藤 好弘; 南埜 宜俊

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2001年03月01日

  
• 繰り返し重ね接合圧延(ARB)による36%Ni鋼の結晶粒微細化

  井上 健; 辻 伸泰; 齋藤 好弘

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2001年03月01日

  
• 溶湯直接圧延による組織制御

  斎藤 好弘; 辻 伸泰

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2001年03月01日

  
• Mechanical Properties of Ultrafine Grained Ferritic Steels Produced by Accumulative Roll-Bonding (ARB) Process

  Nobuhiro Tsuji; Yoshiki Ito; Rintaro Ueji; Yoritoshi Minamino; Yuichiro Koizumi; Yoshihiro Saito

  Proceedings of International Symposium on Ultrafine Grained Steels (ISUGS-2001), ISIJ,, 2001年, 査読有り

  
• ARBにより結晶粒を超微細化された低炭素鋼の機械的性質

  辻 伸泰; 齋藤 好弘; 宇都宮 裕; 伊藤 良規; 上路 林太郎

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 2000年03月01日

  
• フェライトの熱間変形抵抗に及ぼす結晶方位および動的再結晶の影響

  辻 伸泰; 齋藤 好弘

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 1997年03月27日

  
• 加工熱処理による高耐久ばね線材の開発

  綾田 倫彦; 斎藤 好弘; 辻 伸泰

  材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting, 1997年03月27日