Kouno, Daisuke(Graduate School of Engineering, Division of Micro Engineering) | Activity Database on Education and Research, Kyoto University

Kouno, Daisuke

Graduate School of Engineering, Division of Micro Engineering Associate Professor

Last Updated :2026/01/02

Basic Information

Faculty

Faculty of Engineering

Professional Memberships

The Japan Society for Precision Engineering

THE INTERNATIONAL ACADEMY FOR PRODUCTION ENGINEERING

The Japan Society of Mechanical Engineers.

Academic Degree

修士（工学）(京都大学)

博士（工学）(京都大学)

Research History

Dept. of Microengineering, Graduate School of Engineering, Kyoto University, Assistant Professor

Language of Instruction

English

Japanese

ID,URL

J-Global ID
201401081859030341
External link
https://mmc.me.kyoto-u.ac.jp/index_ja

Website(s) (URL(s))

http://mmc.me.kyoto-u.ac.jp/people/kono/index.html

researchmap URL

https://researchmap.jp/7000008857

Last Updated :2026/01/02

Research

Research Topics, Overview of the research

Research Topics
Dynamics of machine tools
Dynamic characteristic modelling of contact surfaces
High performance machine tool element using advanced materials
Perocess conrtroll based on monitoring

Research Interests

Composite material

Additive manufacturing

contact stiffness

Machine installation

Machine tools

Analysis of dynamic property

Research Areas

Manufacturing technology (mechanical, electrical/electronic, chemical engineering), Manufacturing and production engineering

Papers

3D geometry prediction for wall deposition using transfer learning in wire arc additive manufacturing
Hayato Kitagawa; Talash Malek; Daisuke Kono; Berend Denkena
CIRP Journal of Manufacturing Science and Technology, Feb. 2026

Algorithm and Marker Development for 6D Motion Measurement Using a Single Camera
Haochen Huang; Daisuke Kono
International Journal of Automation Technology, 05 Sep. 2025, Last author, Corresponding author

A review of robust thermal error reduction of machine tools
Lingtao Weng; Toru Kizaki; Chi Ma; Weiguo Gao; Daisuke Kono
International Journal of Machine Tools and Manufacture, Jun. 2025, Peer-reviewed, Last author, Corresponding author
Access this paper :

Analysis of positional deviation caused by position-dependent disturbances in ball screw drive
Kono Daisuke; Matsubara Atsushi; Shirai Takeki; Hoshide Kaoru; Miura Tetsuya; Togashi Tsutomu
精密工学会誌, 2016, Peer-reviewed, Lead author, Corresponding author

Thermal displacement reduction based on heat transfer characteristics under environmental temperature changes
Koji Ota; Daisuke Kono, (2); Masahiko Mori, (1)
CIRP Annals, Apr. 2025, Peer-reviewed

Design of a Fixture for Additively Manufactured Workpieces Using Topology Optimization
Hayato Kitagawa; Kozo Furuta; Yasuka Yoshida; Iwao Yamaji; Daisuke Kono
International Journal of Automation Technology, 05 Jan. 2025, Peer-reviewed, Last author
Access this paper :

Principle of surface texture generation and tribological properties generated by ultrasonic vibration cutting
Kota Takashima; Naofumi Tsuji; Daisuke Kono; Akira Sakurada; Kenji Yanagisawa; Hirofumi Kawamura; Keisuke Hara; Hiromi Isobe
Journal of Advanced Mechanical Design, Systems and Manufacturing, 2024, Peer-reviewed

Cracking suppression by substrate preheating using an induction heater in directed energy deposition
Yoko Hirono; Takanori Mori; Masahiro Ueda; Daisuke Kono
Journal of Advanced Mechanical Design, Systems and Manufacturing, 2023, Peer-reviewed, Last author

Dynamical characteristic validation of motorized CFRP spindle unit based on receptance coupling
Makoto Kato; Daisuke Kono; Yasuhiro Kakinuma
Mechanical Systems and Signal Processing, 01 Jul. 2022, Peer-reviewed

Vision-based vibration measurement of machine tool
Haochen Huang; Daisuke Kono; Masahiro Toyoura
Journal of Advanced Mechanical Design, Systems and Manufacturing, 2022, Peer-reviewed, Corresponding author
Access this paper :

Machine tool calibration: Measurement, modeling, and compensation of machine tool errors
Wei Gao; Soichi Ibaraki; M. Alkan Donmez; Daisuke Kono; J.R.R. Mayer; Yuan-Liu Chen; Károly Szipka; Andreas Archenti; Jean-Marc Linares; Norikazu Suzuki
International Journal of Machine Tools and Manufacture, Apr. 2023, Peer-reviewed

Accuracy evaluation of squareness identification by vision-based circular tests for machine tools
Daisuke Kono, (2); Soma Kondo
CIRP Annals, May 2024, Peer-reviewed, Lead author, Corresponding author
Access this paper :

Analysis of tangential contact damping mechanism by direct observation using X-ray computed tomography
Daisuke Kono; Taisuke Yamazaki; Tomohiro Ishii; Masao Kimura
CIRP Annals, Jan. 2022, Peer-reviewed, Lead author, Corresponding author
Access this paper :

Stabilization of standoff distance by efficient and adaptive updating of layer height command in directed energy deposition
Kono, D.; Yamaguchi, H.; Oda, Y.; Sakai, T.
CIRP Journal of Manufacturing Science and Technology, 2020, Peer-reviewed, Lead author, Corresponding author

Vision-based volumetric displacement measurement with a self-illuminating target
K. Mori; D. Kono; A. Matsubara
CIRP Annals, 2023, Peer-reviewed

Novel Method for Changing Dynamic Characteristics Balance of Machining System
Takaaki HASHIMOTO; Daisuke KONO; Masataka FURUSAWA; Atsushi MATSUBARA
Journal of the Japan Society for Precision Engineering, Jul. 2022, Peer-reviewed

Anisotropic Dynamic Characteristics of Machining System Improving Vibration Stability in End Milling
Takaaki HASHIMOTO; Daisuke KONO; Masataka FURUSAWA; Atsushi MATSUBARA
Journal of the Japan Society for Precision Engineering, Nov. 2021, Peer-reviewed

Study on Stiffness Analysis Method of Machine Using Linear Motion Guide
Shodai AOYAMA; Tatsuya IMAI; Tohru TAKAHASHI; Atsushi MATSUBARA; Daisuke KONO
Journal of the Japan Society for Precision Engineering, Oct. 2021, Peer-reviewed

Rolling resistance model for estimation of friction fluctuation in linear ball guideways
Daisuke Kono; Tomoyuki Osumi
Precision Engineering, May 2022, Peer-reviewed, Lead author, Corresponding author

Investigation on thermal deformation in laser additive manufacturing
Yuki Kuroiwa; Daisuke Kono; Yohei Oda
MM Science Journal, Jul. 2021, Peer-reviewed, Corresponding author

Towards an understanding of surface finishing with compliant tools using a fast and accurate simulation method
Julien Chaves-Jacob; Anthony Beaucamp; Wule Zhu; Daisuke Kono; Jean-Marc Linares
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Apr. 2021, Peer-reviewed

Holistic multi-scale model of contact stiffness considering subsurface deformation
Daisuke Kono; Yuki Jorobata; Hiromi Isobe
CIRP Annals, Jan. 2021, Peer-reviewed, Lead author, Corresponding author

Effect of Anisotropy of Dynamic Characteristics of Cutting System on Vibration Stability
HASHIMOTO Takaaki; KONO Daisuke; FURUSAWA Masataka; MATSUBARA Atsushi
Journal of the Japan Society for Precision Engineering, 2021, Peer-reviewed

Cutter mark cross method for improvement of contact stiffness by controlling distribution of real contact area
Yuki Jorobata; Daisuke Kono
Precision Engineering, May 2020, Peer-reviewed, Last author, Corresponding author
Access this paper :

Evaluation of Machine Tool Spindle Using Carbon Fiber Composite
Ryo Kondo; Daisuke Kono; Atsushi Matsubara
INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY, Mar. 2020, Peer-reviewed, Corresponding author

Thermal error and energy-saving performance evaluation of the energy-saving machine tool using new structural materials
Makoto KATO; Daisuke KONO; Hayato YOSHIOKA; Naohiko SUGITA; Akihide HAMAGUCHI; Kazumasa KONO; Kazunori IIJIMA; Yasuhiro KAKINUMA
Transactions of the JSME (in Japanese), 2020, Peer-reviewed

On-machine measurement method for dynamic stiffness of thin-walled workpieces
Daisuke Kono; Takuma Umezu
Precision Engineering, Nov. 2019, Peer-reviewed, Lead author, Corresponding author
Access this paper :

Machining Process for a Thin-Walled Workpiece Using On-Machine Measurement of the Workpiece Compliance
Takuma Umezu; Daisuke Kono
International Journal of Automation Technology, Sep. 2019, Peer-reviewed, Corresponding author

A robust level error estimation method for machine tool installation
Kotaro Mori; Daisuke Kono; Atsushi Matsubara
Precision Engineering, Jul. 2019, Peer-reviewed

Energy efficiency improvement of machine tool spindle cooling system with on–off control
Kotaro Mori; Benjamin Bergmann; Daisuke Kono; Berend Denkena; Atsushi Matsubara
CIRP Journal of Manufacturing Science and Technology, May 2019, Peer-reviewed

A machine tool motorized spindle with hybrid structure of steel and carbon fiber composite
Daisuke Kono; Soichiro Mizuno; Toshiyuki Muraki; Masamitsu Nakaminami
CIRP ANNALS-MANUFACTURING TECHNOLOGY, Apr. 2019, Peer-reviewed

Destruction energy index (DEI) of Vitamin E blended UHMWPE for artificial joints
Naoya Hatano; Masaya Higaki; Youhei Otsu; Tatsuya Otsu; Shinji Mikami; Mitsuhiro Matsumoto; Daisuke Kono; Atsushi Matsubara; Naohide Tomita
Biosurface and Biotribology, 01 Mar. 2019
Access this paper :

Model-based installation of viscoelastic damper support for reduction of residual vibration
Kotaro Mori; Daisuke Kono; Iwao Yamaji; Atsushi Matsubara
International Journal of Automation Technology, Sep. 2018, Peer-reviewed

Influence of kolling contact surface and contact load on fluctuation of rolling friction force
Tetsuya Miura; Atsushi Matsubara; Daisuke Kono; Iwao Yamaji; Kazuma Otaka; Kaoru Hoshide
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, Jan. 2018, Peer-reviewed

Effects of cladding path on workpiece geometry and impact toughness in Directed Energy Deposition of 316L stainless steel
Daisuke Kono; Akihiro Maruhashi; Iwao Yamaji; Yohei Oda; Masahiko Mori
CIRP Annals, 2018, Peer-reviewed, Lead author, Corresponding author

Influence of Rolling Contact Surface and Contact Load on Fluctuation of Rolling Friction Force
三浦徹也; 松原厚; 河野大輔; 山路伊和夫; 大高一馬; 星出薫
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2018, Peer-reviewed

Modelling of viscoelastic damper support for reduction in low frequency residual vibration in machine tools
Kotaro Mori; Daisuke Kono; Iwao Yamaji; Atsushi Matsubara
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, Oct. 2017, Peer-reviewed

Influence of rotary axis on tool-workpiece loop compliance for five-axis machine tools
Daisuke Kono; Yuki Moriya; Atsushi Matsubara
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, Jul. 2017, Peer-reviewed, Lead author, Corresponding author

Linked ball bar for flexible motion error measurement for machine tools
Daisuke Kono; Fumiya Sakamoto; Iwao Yamaji
International Journal of Automation Technology, 01 Mar. 2017, Peer-reviewed, Lead author, Corresponding author

Design of high-precision ball screw based on small-ball concept
Tetsuya Miura; Atsushi Matsubara; Daisuke Kono; Kazuma Otaka; Kaoru Hoshide
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, Jan. 2017, Peer-reviewed

Design of a support system with a pivot mechanism for suppressing vibrations in thin-wall milling
Atsushi Matsubara; Yukihiro Taniyama; Jun Wang; Daisuke Kono
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2017, Peer-reviewed

Support placement for machine tools using stiffness model
Kotaro Mori; Daisuke Kono; Iwao Yamaji; Atsushi Matsubara
International Journal of Automation Technology, Nov. 2015, Peer-reviewed

A method for stiffness tuning of machine tool supports considering contact stiffness
Daisuke Kono; Syuya Nishio; Iwao Yamaji; Atsushi Matsubara
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Mar. 2015, Peer-reviewed, Lead author, Corresponding author
Access this paper :

Evaluation of dynamic stiffness of machine tool spindle by non-contact excitation tests
Atsushi Matsubara; Shota Tsujimoto; Daisuke Kono
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2015, Peer-reviewed

超精密加工機用転がり案内の特性:移動時に受ける抵抗力の測定
甲斐義章; 福田将彦; 松原厚; 河野大輔
砥粒加工学会誌, 2014, Peer-reviewed

Stiffness model of machine tool supports using contact stiffness
Daisuke Kono; Takahiro Inagaki; Atsushi Matsubara; Iwao Yamaji
Precision Engineering, Jul. 2013, Peer-reviewed, Lead author, Corresponding author
Access this paper :

超精密加工機の動特性評価（衝撃加振試験による案内機構の剛性評価）
甲斐義章; 福田将彦; 松原厚; 河野大輔
日本機械学会論文集Ｃ編, Jan. 2013, Peer-reviewed

Analysis method for investigating the influence of mechanical components on dynamic mechanical error of machine tools
Daisuke Kono; Atsushi Matsubara; Kotaro Nagaoka; Kazuo Yamazaki
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, Jul. 2012, Peer-reviewed, Lead author, Corresponding author
Access this paper :

Estimation of dynamic mechanical error for evaluation of machine tool structures
Kono, D.; Weikert, S.; Matsubara, A.; Yamazaki, K.
International Journal of Automation Technology, Mar. 2012, Peer-reviewed, Lead author, Corresponding author

Vibration Analysis of High-Precision Machine Tools Mounted on a Passive Vibration Isolation Table
KONO Daisuke; MATSUBARA Atsushi; OKADA Takumi; HIROOKA Takahiko; YASUDA Masashi
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, Jan. 2011, Peer-reviewed, Lead author, Corresponding author

In-situ Measurement by Using a Measurement-Fused Machining System
KOIKE Yusuke; KONO Daisuke; MATSUBARA Atsushi; YAMAJI Iwao
Journal of the Japan Society for Precision Engineering, Aug. 2010, Peer-reviewed
Access this paper :

Evaluation of modelling approaches for machine tool design
Daisuke Kono; Thomas Lorenzer; Sascha Weikert; Konrad Wegener
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, Jul. 2010, Peer-reviewed, Lead author, Corresponding author
Access this paper :

Dynamic characteristics and dual control of a ball screw drive with integrated piezoelectric actuator
Tomoya Fujita; Atsushi Matsubara; Daisuke Kono; Iwao Yamaji
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, Jan. 2010, Peer-reviewed
Access this paper :

Measurement of the Copying Rate of Tool Edge Motions by Using a Measurement-Fused Machining System
KONO Daisuke; MATSUBARA Atsushi; KOIKE Yusuke; YAMAJI Iwao
Journal of the Japan Society for Precision Engineering, Apr. 2009, Peer-reviewed, Lead author, Corresponding author
Access this paper :

High-precision machining by measurement and compensation of motion error
Daisuke Kono; Atsushi Matsubara; Iwao Yamaji; Tomoya Fujita
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Aug. 2008, Peer-reviewed, Lead author, Corresponding author
Access this paper :

Misc.

Fundamental investigation on subpixel resolution in motion capturing by function fitting method
Daisuke Kono
Proceedings of SPIE - The International Society for Optical Engineering, Apr. 2024, Peer-reviewed, Lead author, Corresponding author

Effect of training dataset on vision-based position identification using convolutional neural network
Risako Mita; Kotaro Mori; Daisuke Kono
Proceedings of SPIE - The International Society for Optical Engineering, Apr. 2024, Peer-reviewed, Last author, Corresponding author

Investigation on damping properties of contact surfaces with different asperity heights
Shimpei Saito; Daisuke Kono
European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023, 2023

Luminous target marker for vision based motion error measurement of machine tools
Daisuke Kono; Masahiro Toyoura
Proceedings of SPIE - The International Society for Optical Engineering, 2023, Peer-reviewed, Invited, Lead author

Study on stress distribution variation near contact surface in sliding of contact asperities
Shimpei SAITO; Daisuke KONO; Hiromi ISOBE
The 19th International Conference on Precision Engineering, Nov. 2022, Peer-reviewed, Corresponding author

Bayesian network model for predicting possible causes of machining defects
Hayato MORI; Go SATO; Daisuke KONO
The 19th International Conference on Precision Engineering, Nov. 2022, Peer-reviewed

Effect of stiffness and heat transition of supports on thermal distortion of workpieces in selective laser melting
Daisuke KONO; Yuki KUROIWA; Maruka SHIMOYAMA; Iwao YAMAJI; Yohei ODA
The 19th International Conference on Precision Engineering, Nov. 2022, Peer-reviewed, Lead author, Corresponding author

FIXTURE DESIGN OF ADDITIVE MANUFACTURING WORKPIECE FOR POST-PROCESSES
Hayato Kitagawa; Maruka Shimoyama; Daisuke Kono
Proceedings of the 2022 International Symposium on Flexible Automation, Jul. 2022, Peer-reviewed, Corresponding author

Direct observation of contact surface deformation by X-ray CT
Taisuke YAMAZAKI; Tomohiro ISHII; Masao KIMURA; Daisuke KONO
The 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Nov. 2021, Peer-reviewed, Last author, Corresponding author

Passive cooling of machine tool spindle for reduction of cooling energy
Kiyomasa TANAKA; Daisuke KONO; Atsushi MATSUBARA
The 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), 2021, Peer-reviewed, Corresponding author

Effect of expansion coefficient difference between machine tool and workpiece to the thermal deformation induced by room temperature change
Kotaro Mori; Daisuke Kono; Atsushi Matsubara
Procedia CIRP, 2020

Influence of contact positioning of pivot support on machining vibration
Kotaro Mori; Iwao Yamaji; Daisuke Kono; Atsushi Matsubara; Takehiro Ishida; Yuki Kaitani; Eiji Higashi; Taisuke Urakami
Proceedings of the ASME 2021 16th International Manufacturing Science and Engineering Conference, MSEC 2021, 2021

A friction fluctuation model of rolling guideways
Daisuke Kono; Tomoyuki Osumi
Proceedings of the ASME 2021 16th International Manufacturing Science and Engineering Conference, MSEC 2021, 2021

Vision Based Two-Dimensional Measurement of Machine Tool Motion Trajectory
Haochen Huang; Daisuke Kono; Masahiro Toyoura
10th International Conference on Leading Edge Manufacturing Technologies in 21st Century, LEM 2021, 2021

On-machine measuring instrument of workpiece compliance using laser interferometer
Masataka Furusawa; Daisuke Kono
2020 International Symposium on Flexible Automation, ISFA 2020, 2020

Machining vibration suppression of a cylindrical part by point-contact support
Atsushi Matsubara; Kotaro Mori; Daisuke Kono
JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020, 2020

On-site estimation of floor stiffness for modelling machine tool supports
Daisuke Kono; Kotato Mori
Procedia CIRP, 2018
Access this misc :

Influence of contact condition between flexible plate and passive pivot support on machining vibration
Atsushi Matsubara; Hiroaki Nagai; Nils Knorr; Daisuke Kono
Procedia CIRP, Jan. 2018
Access this misc :

Evaluation of on-machine measuring method for dynamic stiffness of thin-walled workpieces
Takuma Umezu; Daisuke Kono; Atsushi Matsubara
Procedia CIRP, Jan. 2018
Access this misc :

Implementation of jack bolts with built-in preload sensors for level condition monitoring of machine tool
Kotaro Mori; Daisuke Kono; Atsushi Matsubara; Hidenori Saraie
Procedia CIRP, Jan. 2018
Access this misc :

Non-contact temperature measurement of deposited objects manufactured by Directed Energy Deposition
Akihiro Maruhashi; Daisuke Kono; Iwao Yamaji; Yohei Oda; Atsushi Matsubara
Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017, 13 Nov. 2017

Comparison of thermal deformation of steel and CFRP shafts for machine tool spindles
Ryo Kondo; Daisuke Kono; Iwao Yamaji; Atsushi Matsubara
Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017, 13 Nov. 2017

Preload distribution on machine tool mounting structure by leveling work during installation
Kotaro Mori; Daisuke Kono; Atsushi Matsubara; Hidenori Saraie
Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017, 13 Nov. 2017, Peer-reviewed

Vibration reduction of machine tool using viscoelastic damper support
Kotaro Mori; Daisuke Kono; Iwao Yamaji; Atsushi Matsubara
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING, 2016, Peer-reviewed
Access this misc :

Investigation on Direction Dependency of Tool-Workpiece Compliance of Machine Tool
Daisuke Kono; Atsushi Matsubara
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING, 2016, Peer-reviewed
Access this misc :

Investigation on position dependency of tool-workpiece compliance
Daisuke Kouno; Philip Roh; Atsushi matsubara
the 38th MATADOR Conference (MATADOR 2015), 3921 , Huwei, Taiwan, Mar. 2015, Peer-reviewed, Invited

VIBRATION ANALYSIS ON MACHINING OF THIN-WALLED CYLINDER
Atsushi Matsubara; Yosuke Taguchi; Jun Wang; Daisuke Kono
PROCEEDINGS OF THE 22ND INTERNATIONAL CONGRESS ON SOUND AND VIBRATION, 2015, Peer-reviewed

Additional damper mounts for machine tool to reduce rocking vibration
Mori Kotaro; Kono Daisuke; Yamaji Iwao; Matsubara Atsushi
The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), 2015, Peer-reviewed

Effect of support system on vibration mode of ultra-precision machine tools
Kai Yoshiaki; Fukuta Masahiko; Matsubara Atsushi; Kono Daisuke
The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), 2015, Peer-reviewed

Vibration analysis of machine tools considering contact stiffness of supports
Daisuke Kouno
the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology(ASPEN2013), 1053 , Taipei Taiwan, Nov. 2013, Peer-reviewed

Measurement of Contact Stiffness for Stiffness Estimation of Machine Tool Supports
Kono Daisuke; Inagaki Takahiro; Matsubara Atsushi; Yamaji Iwao
Key Engineering Materials, Nov. 2012, Peer-reviewed

Evaluation of Surface Roughness in High-Speed Shaping of Ni-P
Kono Daisuke; Nakade Sho; Matsubara Atsushi
Key Engineering Materials, Jun. 2012, Peer-reviewed

Feedforward control method for precise motion trajectory of tool center point based on dynamic model of NC machine tools
K. Nagaoka; A. Matsubara; D. Kono
Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011, 2011, Peer-reviewed

Investigation of Copying Rate of Tool Motions on Workpiece Profile
Kono Daisuke; Matsubara Atsushi
Key Engineering Materials, Sep. 2010, Peer-reviewed

Evaluation of identification accuracy of copying rate of tool motions with measurement-fused machining system
Kono Daisuke; Matsubara Atsushi; Koike Yusuke; Yamaji Iwao
The 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2009), 2009, Peer-reviewed

Machine tools with an enhanced ball screw drive in vertical axis for shaping of micro textures
Kono Daisuke; Fujita Tomoya; Matsubara Atsushi; Yamaji Iwao
The 10th euspen International Conference, 2008, Peer-reviewed

Development and evaluation of a high-precision machining center with friction-less drives
Daisuke Kono; Atsushi Matsubara; Soichi Ibaraki; Hisashi Otsubo; Masaru Tsuboi; Isao Oshita
TOWARDS SYNTHESIS OF MICRO - /NANO - SYSTEMS, 2007, Peer-reviewed

High-precision machining by measurement and compensation of motion error
Kono Daisuke; Matsubara Atsushi; Yamaji Iwao; Fujita Tomoya
The 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), 2007, Peer-reviewed

Dynamic characteristics and positioning performance of piezoactuator- integrated ball screw drive
T. Fujita; D. Kono; A. Matsubara; I. Yamaji; S. Ibaraki
LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings, 2007, Peer-reviewed

Nano-positioning drive with piezoelectric actuator integrated into support bearing unit of ball screw
A. Matsubara; T. Fujita; D. Kono; N. Tanaka; Y. Watanabe
PROCEEDINGS OF THE 35TH INTERNATIONAL MATADOR CONFERENCE, 2007, Peer-reviewed

Presentations

押し付け力を管理した治具の振動特性の評価
沼田来紀; 森幸太郎; 河野大輔; 松原厚
精密工学会学術講演会講演論文集, 31 Aug. 2023, 公益社団法人精密工学会

CNNの層構成が画像内のマーカ位置の同定精度に与える影響の検討
三田理紗子; 森幸太郎; 河野大輔
精密工学会学術講演会講演論文集, 31 Aug. 2023, 公益社団法人精密工学会

幾何学的な加工モデルを考慮した切削加工の因果関係を推定するベイジアンネットの構築
森勇人; 佐藤剛; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2023

トポロジー最適化を用いた金属積層造形ワークの後加工における治具設計
北川颯人; 古田幸三; 山路伊和夫; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2023

加工面の品位に対するボールエンドミル摩耗量の寄与の調査
森勇人; 佐藤剛; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2023

プリミティブ形状の組み合わせで実現する金属積層造形ワークの後加工用治具の設計
北川颯人; 山路伊和夫; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2023

接触突起高さに差を設けた試験片における水平方向荷重負荷時の突起変形挙動の調査
齋藤慎平; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2023

非接触温度測定と粒子フィルタを用いた回転軸の熱的境界条件の同定に関する研究
石垣綾斗; 河野大輔; 大和駿太郎
精密工学会大会学術講演会講演論文集(CD-ROM), 2023

Visualization of true contact state on surface textures generated by ultrasonic vibration cutting (2nd. report)-Analysis of internal stress using finite element method of three-dimensional form-
高島孝太; 櫻田陽; 辻尚史; 河野大輔; 川村拓史; 原圭祐; 磯部浩已
精密工学会大会学術講演会講演論文集(CD-ROM), 2023

Frequency-response-based detection of tightening condition of thin-walled cylindrical workpiece
三浦我夢; 森幸太郎; 河野大輔; 松原厚
精密工学会大会学術講演会講演論文集(CD-ROM), 2023

Investigation of the relationship between clamping conditions and vibration characteristics of workpiece
三浦我夢; 森幸太郎; 河野大輔; 松原厚
精密工学会大会学術講演会講演論文集(CD-ROM), 02 Mar. 2022, 公益社団法人精密工学会

Visualization of true contact state on surface textures generated by ultrasonic vibration cutting
高島孝太; 亀ヶ谷尚志; 櫻田陽; 原圭祐; 河野大輔; 田浦裕生; 辻尚史; 磯部浩已
精密工学会大会学術講演会講演論文集(CD-ROM), 2022

SLM方式積層造形におけるサポートの機械的性質に関する調査
下山丸加; 黒岩祐樹; 河野大輔; 小田陽平
精密工学会大会学術講演会講演論文集(CD-ROM), 2022

異方性材料を用いた主軸ベアリング内外輪の相対変位抑制
田中淳聖; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2022

加工システムの動特性バランスの調整によるエンドミル加工の振動安定性の向上
橋本高明; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2022

発熱による主軸剛性の変化に対する材料配置の影響の調査
田中淳聖; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2022

Evaluation of utility and forming technology that surface texture by ultrasonic vibration cutting (4th.report)-Evaluation of relationship between cutting conditions and tribological properties-
高島孝太; 櫻田陽; 原圭祐; 河野大輔; 田浦裕生; 辻尚史; 磯部浩已
精密工学会大会学術講演会講演論文集(CD-ROM), 2022

Detection of clamping failure using displacement sensor less piezo excitation for stiffness measurement
三浦我夢; 森幸太郎; 河野大輔; 松原厚
精密工学会大会学術講演会講演論文集(CD-ROM), 08 Sep. 2021, 公益社団法人精密工学会

主軸剛性の温度依存性の解析
東條明裕; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2021

X線CTを用いた静的荷重負荷下における接触面の変形観察
山崎太資; 石井友弘; 木村正雄; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2021

SLMにおける積層物の剥離における応力状態の解析
黒岩佑樹; 下山丸加; 小田陽平; 山路伊和夫; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2021

SLM方式積層造形におけるサポートの形状がワークの反りに及ぼす影響について
下山丸加; 河野大輔; 小田陽平
精密工学会大会学術講演会講演論文集(CD-ROM), 2021

加工システムの動特性バランスの変更方法に関する研究
橋本高明; 古澤正崇; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2021

Evaluation of utility and forming technology that surface texture by ultrasonic vibration cutting (2nd.report)-Evaluation of starting friction-
日向寺柾; 櫻田陽; 原圭祐; 河野大輔; 田浦裕生; 辻尚史; 磯部浩已
精密工学会大会学術講演会講演論文集(CD-ROM), 2021

Selective laser meltingのサポートが造形物の熱変形に与える影響の調査
黒岩佑樹; 下山丸加; 小田陽平; 山路伊和夫; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2021

High-speed Micro Texturing by Ultrasonic Cutting: 1st report: Construction of texturing tool and evaluation of tribological characteristics
磯部浩已; 田浦裕生; 近藤礼皇; 原圭祐; 宮脇和人; 櫻田陽; 辻尚史; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2021

工作機械主軸の剛性変化の抑制
田中淳聖; 東條明裕; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2021

X線CTによる直接観察に基づく接触面変形挙動の解析
山崎太資; 石井友弘; 木村正雄; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2021

接触面間の隙間を利用した接触面での剛性を低減させずに減衰性を向上させる手法
山崎太資; 河野大輔
精密工学会大会学術講演会講演論文集(CD-ROM), 2020

Support for beginners in machining process
河野大輔; 天野晶仁; 佐藤剛; 森健太郎; 楠見孝; 松原厚
システム制御情報学会研究発表講演会講演論文集(CD-ROM), 15 May 2019

支持荷重の測定誤差が工作機械のレベル誤差推定に与える影響
森幸太郎; 河野大輔; 松原厚
精密工学会大会学術講演会講演論文集, 20 Aug. 2018

工作機械のレベル変化が支持点間の荷重配分に与える影響の検討
森幸太郎; 河野大輔; 松原厚; 新家秀則
精密工学会大会学術講演会講演論文集, 01 Mar. 2018

薄肉工作物の機上動剛性測定法の評価
梅津拓真; 河野大輔; 松原厚
精密工学会学術講演会講演論文集, 2018, 公益社団法人精密工学会

炭素繊維強化プラスチックと鉄鋼材料を用いた円筒部材のねじり強度の評価（第2報）:層間せん断強度と残留応力の評価
水野宗一郎; 河野大輔; 山路伊和夫; 村木俊之; 中南成光; 松原厚
精密工学会学術講演会講演論文集, 2018, 公益社団法人精密工学会

工作機械主軸の熱変形が主軸動剛性変化に与える影響
近藤諒; 松原厚; 河野大輔; 山路伊和夫
日本機械学会関西支部定時総会講演会講演論文集, 13 Mar. 2017

工作機械の支持部に用いる減衰付加機構のモデル化
森幸太郎; 河野大輔; 山路伊和夫; 松原厚
精密工学会大会学術講演会講演論文集, 01 Mar. 2017, 公益社団法人精密工学会

Directed Energy Depositionを用いた積層造形物の温度測定に関する研究
丸橋瑛大; 河野大輔; 山路伊和夫; 小田陽平; 松原厚
精密工学会学術講演会講演論文集, 2017, 公益社団法人精密工学会

JSPE Affiliate News
河野大輔
Journal of the Japan Society for Precision Engineering, 2017, The Japan Society for Precision Engineering

二球間距離測定を用いた工作機械の円弧補間運動の中心位置同定に関する研究
岡尚哉; 山路伊和夫; 河野大輔; 松原厚
精密工学会大会学術講演会講演論文集, 20 Aug. 2016

非接触動的主軸試験による工作機械主軸剛性の評価
松原厚; 河野大輔; 辻本翔太
精密工学会大会学術講演会講演論文集, 20 Aug. 2016

ボール小径化によるボールねじの高精度化(第一報)―位置偏差変動とトルク変動の解析―
三浦徹也; 星出薫; 松原厚; 河野大輔; 大高一馬
精密工学会大会学術講演会講演論文集, 20 Aug. 2016

P072 Analysis of positioning deviation in feed system using a linear ball guide ways
OTAKA Kazuma; KONO Daisuke; MIURA Tetsuya; MATSUBARA Atsushi
関西支部講演会講演論文集, 11 Mar. 2016, The Japan Society of Mechanical Engineers

三軸同期運動を用いた工作機械の誤差検出に関する研究
岡尚哉; 山路伊和夫; 河野大輔; 松原厚
精密工学会大会学術講演会講演論文集, 01 Mar. 2016, 公益社団法人精密工学会

二球間距離測定による5軸制御マシニングセンタ旋回軸の幾何誤差同定
坂本郁弥; 山路伊和夫; 河野大輔; 松原厚
精密工学会大会学術講演会講演論文集, 20 Aug. 2015, 公益社団法人精密工学会

工作機械支持機構の高減衰化
森幸太郎; 河野大輔; 山路伊和夫; 松原厚
精密工学会大会学術講演会講演論文集, 20 Aug. 2015, The Japan Society for Precision Engineering

二球間距離測定による工作機械の幾何誤差同定
坂本郁弥; 山路伊和夫; 河野大輔; 松原厚
日本機械学会関西支部定時総会講演会講演論文集, 16 Mar. 2015, The Japan Society of Mechanical Engineers

国際会議報告：VMPT2015 報告
河野大輔
精密工学会誌, Jan. 2015

工作機械のコンプライアンスの位置依存性と方向依存性に関する研究
河野大輔; 松原厚
Proceedings of JSPE Semestrial Meeting, 2015, The Japan Society for Precision Engineering

接触部の減衰特性に関する研究
長谷川裕亮; 河野大輔; 山路伊和夫; 松原厚
Proceedings of JSPE Semestrial Meeting, 2015, 公益社団法人精密工学会

ロータリーエンコーダによる二球間距離計測を用いた工作機械の誤差測定
岡尚哉; 松原厚; 山路伊和夫
Proceedings of JSPE Semestrial Meeting, 2015

S1310104 Friction Analysis for design of high precision feed drives
SAYAMA Atsuko; MATSUBARA Atsushi; KOUNO Daisuke
Mechanical Engineering Congress, Japan, 07 Sep. 2014, The Japan Society of Mechanical Engineers

超精密加工機用転がり案内の特性移動時に受ける抵抗力の測定
KAI YOSHIAKI; FUKUTA MASAHIKO; MATSUBARA ATSUSHI; KONO DAISUKE
砥粒加工学会学術講演会講演論文集(CD-ROM), 2014

ロータリエンコーダを用いた二球間距離測定
坂本郁弥; 山路伊和夫; 河野大輔; 松原厚
Proceedings of JSPE Semestrial Meeting, 2014

支持剛性のモデルに基づく工作機械の支持点配置法
河野大輔; 西尾修也; 山路伊和夫; 松原厚
Proceedings of JSPE Semestrial Meeting, 2014

接触部の動剛性を測定する装置の開発
長谷川裕亮; 河野大輔; 松原厚; 山路伊和夫
Proceedings of JSPE Semestrial Meeting, 2014

薄肉ワークのエンドミル加工系の振動解析について
田口陽介; 山路伊和夫; 河野大輔; 松原厚
Proceedings of JSPE Semestrial Meeting, 2014

支持点配置による工作機械の固有振動数の変化
森幸太郎; 河野大輔; 山路伊和夫; 松原厚
The ... Manufacturing & Machine Tool Conference, 2014

S131021 Vibration Control of Boring Bar by using Piezoelectric Actuator
MATSUBARA Atsushi; MAEDA Minetaka; KONO Daisuke
Mechanical Engineering Congress, Japan, 08 Sep. 2013, The Japan Society of Mechanical Engineers

Identification of Dynamic Cutting Force Coefficients by Shaper Cutting
Sugiura Hiraku; Kono Daisuke; Yamaji Iwao; Matsubara Atsushi
Proceedings of JSPE Semestrial Meeting, 2013, The Japan Society for Precision Engineering

Method for changing the stiffness of machine tool supports
Imayasu Shinya; Kono Daisuke; Matsubara Atsushi; Yamaji Iwao
Proceedings of JSPE Semestrial Meeting, 2013, The Japan Society for Precision Engineering

構造振動を考慮した工作機械の支持点配置に関する研究
西尾修也; 河野大輔; 松原厚; 山路伊和夫
精密工学会学術講演会講演論文集, 2013, The Japan Society for Precision Engineering

超精密切削加工特性に優れた電気めっき加工技術の検討
中村知彦; 河野大輔; 北垣寛
京都府中小企業技術センター技報, Jan. 2012, 京都府中小企業技術センター

A Study on Estimation of the Support Stiffness of Machine Tools
Kono Daisuke; Inagaki Takahiro; Matsubara Atsushi; Yamaji Iwao
Proceedings of JSPE Semestrial Meeting, 2012, The Japan Society for Precision Engineering

ナノインデンテーションによる接触剛性モデルのパラメータ同定
河野大輔; 松原厚
精密工学会学術講演会講演論文集, 2012, The Japan Society for Precision Engineering

ロッキング振動を考慮した工作機械の支持点配置に関する研究
西尾修也; 松原厚; 河野大輔
精密工学会学術講演会講演論文集, 2012, The Japan Society for Precision Engineering

A Compensation of Motion Error for NC Machine Tool based on Error Analysis of Tool Tip Motion(3rd Report):Compensation Method using a Dynamic Model of Tool Tip Motion
Nagaoka Kotaro; Matsubara Atsushi; Kono Daisuke
Proceedings of JSPE Semestrial Meeting, 2011, The Japan Society for Precision Engineering

Influence of contact stiffness on support stiffness of machine tools
Inagaki Takahiro; Matsubara Atsushi; Kouno Daisuke
Proceedings of JSPE Semestrial Meeting, 2011, The Japan Society for Precision Engineering

Vibration Analysis of High-Speed, High-Precision Machine Tools using Rigid Body Simulation
Kono Daisuke; Matsubara Atsushi
Proceedings of JSPE Semestrial Meeting, 2011, The Japan Society for Precision Engineering

E01 Analysis of machining errors in high speed shaping with single crystal diamond tools
NAKADE Sho; KONO Daisuke; MATSUBARA Atsushi
The ... Manufacturing & Machine Tool Conference, Nov. 2010, The Japan Society of Mechanical Engineers

Vibration Analysis of Micromilling Machine on the Passive Vibration Isolation System
Hirooka Takahiko; Matsubara Atsushi; Kono Daisuke; Yasuda Masashi; Okada Takumi
Proceedings of JSPE Semestrial Meeting, 2009, The Japan Society for Precision Engineering

Measurement of the copying rate of the edge motion by using a measurement-fused machining system (1st report):System development
Matsubara Atsushi; Kono Daisuke; Koike Yusuke; Yamaji Iwao
Proceedings of JSPE Semestrial Meeting, 2008, The Japan Society for Precision Engineering

3617 High-precision Machining by Measurement and Compensation of Motion Error
KONO Disuke; MATSUBARA Atsushi
年次大会講演論文集 : JSME annual meeting, Sep. 2007, The Japan Society of Mechanical Engineers

3615 Nano Positioning Drive with Piezoelectric Actuator Integrated into Support Ball Screw
FUJITA Tomoya; MATSUBARA Atsushi; KONO Daisuke
年次大会講演論文集 : JSME annual meeting, Sep. 2007, The Japan Society of Mechanical Engineers

A Study on High-precision Machining by Measurement and Compensation of Motion Error
Kono Daisuke; Matsubara Atsushi; Watanabe Yasumi
Proceedings of JSPE Semestrial Meeting, 2007, The Japan Society for Precision Engineering

Analysis of Contouring Error by Using Sensitivity of Servo Control Systems
Anazawa Yuichi; Matsubara Atsushi; Ibaraki Soichi; Kono Daisuke
Proceedings of JSPE Semestrial Meeting, 2007, The Japan Society for Precision Engineering

A study on the estimation of cutting forces by using motor currents in a feed drive system
Kono Daisuke; Ibaraki Soichi; Ohtsuka Hirotoshi; Ohshita Isao
Proceedings of JSPE Semestrial Meeting, 2006, The Japan Society for Precision Engineering

Books and Other Publications

精密計測学 = Precision metrology
高, 偉; 清水, 裕樹; 水谷, 康弘; 道畑, 正岐; 河野, 大輔; 吉田, 一朗; 伊東, 聡; 清水, 浩貴, Contributor
朝倉書店, Apr. 2024
Find Kyoto University's collection of books :

Industrial Property Rights

特許5351639, 特開2011-020233, 特願2009-168925, 機上測定方法及び測定装置
松原厚; 山路伊和夫; 河野大輔; 小池雄介

特開2021-031704, 特願2019-150427, 付加加工装置、付加加工装置の制御方法、および、付加加工装置の制御プログラム
河野大輔; 山口晴之; 森幸太郎

特開2021-009089, 特願2019-123454, 摺動評価装置、摺動評価方法、摺動評価値算出装置およびプログラム
河野大輔; 富田直秀; 波多野直也; 檜垣誠妥; 大津陽平; 松本勝志; 井上康博

特開2020-171986, 特願2019-074610, 主軸装置の熱変位制御方法、及び熱変位が制御された主軸装置
中南成光; 村木俊之; 河野大輔; 水野宗一郎

特開2020-168671, 特願2019-070339, 工作機械の主軸
中南成光; 村木俊之; 河野大輔; 水野宗一郎

特許第6690036号, 特開2020-148401, 特願2019-046705, 冷却装置の制御方法
森幸太郎; 河野大輔; 松原厚; 桂康哲; 河合謙吾

特開2020-075298, 特願2018-208129, 支持装置の支持位置調整量推定方法、支持装置の支持位置調整方法、及び支持装置の支持位置調整量推定装置
森幸太郎; 河野大輔

WO2020-075650, JP2019039365, 仕上げ面の接触剛性の評価方法およびその評価装置
河野大輔; 女良畑佑規; 山路伊和夫

特許第6690035号, 特願2019-046705, 冷却装置の制御方法
森幸太郎; 河野大輔; 松原厚; 桂康哲; 河合謙吾

WO2019-207732, JP2018017060, 作業支援装置
藤田智哉; 佐藤剛; 堀淳志; 森健太郎; 松原厚; 河野大輔; 楠見孝

Awards

10 Nov. 2022
Excellent　Poster　Award（優秀賞）

10 Dec. 2021
一般財団法人FA財団論文賞

29 May 2009
Mazak foundation, Commendation Program for Research Papers

02 Aug. 2013
Fuji Technology Press Ltd., International Journal of Automation Technology The Best Paper Award

14 Nov. 2013
Asian Society for Precision Engineering and Nanotechnology, Young Researcher Award

19 Mar. 2014
公益社団法人精密工学会, 2013年度精密工学会研究奨励賞

16 Mar. 2018
公益社団法人精密工学会, 精密工学会論文賞

Media Coverage

工作機械を足元から変える
月刊生産財マーケティング, 今に花咲き実を結ぶ, 01 Mar. 2015

External funds: Kakenhi

Rapid Generation and Sliding Characteristics of Aligned Microtextures by Phase-Controlled Ultrasonic Cutting
Grant-in-Aid for Scientific Research (B)
Basic Section 18020:Manufacturing and production engineering-related
Nagaoka University of Technology
Hiromi Isobe
From 01 Apr. 2021, To 31 Mar. 2024, Project Closed
マイクロテクスチャ;バイオミメティクス;旋盤加工;切削加工;超音波加工;トライボロジー;光弾性法;テクスチャリング
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-21H01225/

Reconstruction of contact model and design method of contact surface geometry by direct measurement of deformation behavior on metal contact surfaces
Grant-in-Aid for Scientific Research (B)
Basic Section 18020:Manufacturing and production engineering-related
Kyoto University
Daisuke Kono
From 01 Apr. 2020, To 31 Mar. 2023, Project Closed
接触剛性;接触減衰;X線CT;光弾性法;弾塑性変形;滑り;マイクロX線CT;減衰性
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-20H02046/

Machine tools based on inovation of design and informatics
Grant-in-Aid for Scientific Research (A)
Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
The University of Tokyo
Naohiko Sugita
From 01 Apr. 2019, To 31 Mar. 2024, Project Closed
工作機械;生産システム;ダイナミックケイパビリティ;フレキシブル;生産ライン;AGV;モジュール型
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-19H00735/

Machining process for thin-walled workpiece using on-machine measurement of workpiece dynamic stiffness
Grant-in-Aid for Scientific Research (C)
Kyoto University
Daisuke Kono
From 01 Apr. 2017, To 31 Mar. 2020, Project Closed
低剛性工作物;動剛性;機上計測;自働化;振動;切削加工;機械工作・生産工学;精密部品加工
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-17K06078/

Analysis of self-excited chatter with mode coupling using real-time simulation of cutting process
Grant-in-Aid for Scientific Research (B)
Kyoto University
Atsushi Matsubara
From 01 Apr. 2017, To 31 Mar. 2020, Project Closed
切削;自励振動;制御;振動モード;工作機械;加振;切削加工;びびり振動;動特性;分岐現象;エンドミル;加振装置;切削抵抗;実時間シミュレーション;切削力;切削工学;動剛性
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-17H03157/

Evaluation of vibration characteristic of machine tools using measuring system for three-dimensional compliance
Grant-in-Aid for Young Scientists (B)
Kyoto University
Daisuke Kono
From 01 Apr. 2014, To 31 Mar. 2016, Project Closed
工作機械;コンプライアンス;俯瞰的評価;振動特性;方向依存性;位置依存性
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-26820021/

Design of machine tool supports based on analysis of contact stiffness
Grant-in-Aid for Young Scientists (B)
Kyoto University
DAISUKE KONO
From 01 Apr. 2012, To 31 Mar. 2014, Project Closed
工作機械;接触剛性;マウント;動特性
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-24760104/

Design method to control ground vibration and direct vibrations for micro-nano machine tools
Grant-in-Aid for Scientific Research (C)
Kyoto University
Atsushi MATSUBARA
From 01 Apr. 2009, To 31 Mar. 2012, Project Closed
工作機械;振動制御;マイクロ・ナノ加工;サーボ系;除振・制振
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-21560121/

不確かさ評価に基づく工作機械の画像計測・位置制御システム実現の方法論
Grant-in-Aid for Scientific Research (B)
Basic Section 18020:Manufacturing and production engineering-related
Kyoto University
河野大輔
From 01 Apr. 2025, To 31 Mar. 2028, Granted
工作機械;画像計測
https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-25K01132/

Last Updated :2026/01/02

Education

Teaching subject(s)

From 01 Apr. 2025, To 31 Mar. 2026
Precision Machining
5099, Spring, Faculty of Engineering, 2

From 01 Apr. 2025, To 31 Mar. 2026
Exercise of Machine Design 2
5060, Fall, Faculty of Engineering, 2

From 01 Apr. 2025, To 31 Mar. 2026
Mathematics for Computation
5003, Spring, Faculty of Engineering, 2

From 01 Apr. 2025, To 31 Mar. 2026
Precision Measurement and Machining
G214, Fall, Graduate School of Engineering, 2

From 01 Apr. 2025, To 31 Mar. 2026
Mechanical and System Engineering Laboratory 2
5057, Spring, Faculty of Engineering, 1

From 01 Apr. 2025, To 31 Mar. 2026
Mechanical and System Engineering Laboratory 2
5057, Fall, Faculty of Engineering, 1

From 01 Apr. 2025, To 31 Mar. 2026
Exercise for Machine Shop Practice
5061, Fall, Faculty of Engineering, 1

From 01 Apr. 2024, To 31 Mar. 2025
Precision Machining
5099, Spring, Faculty of Engineering, 2

From 01 Apr. 2024, To 31 Mar. 2025
Exercise of Machine Design 2
5060, Fall, Faculty of Engineering, 2

From 01 Apr. 2024, To 31 Mar. 2025
Mathematics for Computation
5003, Spring, Faculty of Engineering, 2

From 01 Apr. 2024, To 31 Mar. 2025
Precision Measurement and Machining
G214, Fall, Graduate School of Engineering, 2

From 01 Apr. 2024, To 31 Mar. 2025
Exercise for Machine Shop Practice
5061, Fall, Faculty of Engineering, 1

From 01 Apr. 2024, To 31 Mar. 2025
Mechanical and System Engineering Laboratory 2
5057, Spring, Faculty of Engineering, 1

From 01 Apr. 2024, To 31 Mar. 2025
Mechanical and System Engineering Laboratory 2
5057, Fall, Faculty of Engineering, 1

From 01 Apr. 2023, To 31 Mar. 2024
Mathematics for Computation
5003, Spring, Faculty of Engineering, 2

From 01 Apr. 2023, To 31 Mar. 2024
Precision Machining
5099, Spring, Faculty of Engineering, 2

From 01 Apr. 2023, To 31 Mar. 2024
Exercise of Machine Design 2
5060, Fall, Faculty of Engineering, 2

From 01 Apr. 2023, To 31 Mar. 2024
Precision Measurement and Machining
G214, Fall, Graduate School of Engineering, 2

From 01 Apr. 2023, To 31 Mar. 2024
Exercise for Machine Shop Practice
5061, Fall, Faculty of Engineering, 1

From 01 Apr. 2023, To 31 Mar. 2024
Mechanical and System Engineering Laboratory 2
5057, Spring, Faculty of Engineering, 1

From 01 Apr. 2023, To 31 Mar. 2024
Mechanical and System Engineering Laboratory 2
5057, Fall, Faculty of Engineering, 1

From 01 Apr. 2022, To 31 Mar. 2023
Exercise of Machine Design 2
5060, Fall, Faculty of Engineering, 2

From 01 Apr. 2022, To 31 Mar. 2023
Mechanical and System Engineering Laboratory 2
5057, Fall, Faculty of Engineering, 1

From 01 Apr. 2022, To 31 Mar. 2023
Precision Machining
5099, Spring, Faculty of Engineering, 2

From 01 Apr. 2022, To 31 Mar. 2023
Mechanical and System Engineering Laboratory 2
5057, Spring, Faculty of Engineering, 1

From 01 Apr. 2022, To 31 Mar. 2023
Mathematics for Computation
5003, Spring, Faculty of Engineering, 2

From 01 Apr. 2022, To 31 Mar. 2023
Exercise for Machine Shop Practice
5061, Fall, Faculty of Engineering, 1

From Apr. 2011, To Mar. 2012
機械システム工学実験１（機）
Fall, 工学部

From Apr. 2012, To Mar. 2013
Mechanical and System Engineering Laboratory 1
Spring, 工学部

From Apr. 2012, To Mar. 2013
Mechanical and System Engineering Laboratory 1
Fall, 工学部

From Apr. 2013, To Mar. 2014
Mechanical and System Engineering Laboratory 1
Spring, 工学部

From Apr. 2013, To Mar. 2014
Mechanical and System Engineering Laboratory 1
Fall, 工学部

From Apr. 2014, To Mar. 2015
Mechanical and System Engineering Laboratory 1
Spring, 工学部

From Apr. 2014, To Mar. 2015
Mechanical and System Engineering Laboratory 1
Fall, 工学部

From Apr. 2015, To Mar. 2016
Mechanical and System Engineering Laboratory 1
Spring, 工学部

From Apr. 2015, To Mar. 2016
Mechanical and System Engineering Laboratory 1
Fall, 工学部

From Apr. 2016, To Mar. 2017
Mechanical and System Engineering Laboratory 1
Spring, 工学部

From Apr. 2016, To Mar. 2017
Mechanical and System Engineering Laboratory 1
Fall, 工学部

From Apr. 2017, To Mar. 2018
Mechanical and System Engineering Laboratory 1
Spring, 工学部

From Apr. 2017, To Mar. 2018
Mechanical and System Engineering Laboratory 1
Fall, 工学部

From Apr. 2018, To Mar. 2019
Mechanical and System Engineering Laboratory 1
Spring, 工学部

From Apr. 2018, To Mar. 2019
Mechanical and System Engineering Laboratory 1
Fall, 工学部

From Apr. 2018, To Mar. 2019
Precision Machining
Spring, 工学部

From Apr. 2018, To Mar. 2019
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,B
Fall, 工学研究科

From Apr. 2018, To Mar. 2019
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,D
Fall, 工学研究科

From Apr. 2018, To Mar. 2019
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,F
Fall, 工学研究科

From Apr. 2018, To Mar. 2019
Mathematics for Computation
Spring, 工学部

From Apr. 2019, To Mar. 2020
Mechanical and System Engineering Laboratory 1
Spring, 工学部

From Apr. 2019, To Mar. 2020
Mechanical and System Engineering Laboratory 2
Spring, 工学部

From Apr. 2019, To Mar. 2020
Mechanical and System Engineering Laboratory 2
Fall, 工学部

From Apr. 2019, To Mar. 2020
Exercise for Machine Shop Practice
Fall, 工学部

From Apr. 2019, To Mar. 2020
Exercise of Machine Design 2
Fall, 工学部

From Apr. 2019, To Mar. 2020
Precision Machining
Spring, 工学部

From Apr. 2019, To Mar. 2020
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,B
Fall, 工学研究科

From Apr. 2019, To Mar. 2020
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,D
Fall, 工学研究科

From Apr. 2019, To Mar. 2020
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,F
Fall, 工学研究科

From Apr. 2019, To Mar. 2020
Basic Seminar of Complex Mechanical Engineering,2
Fall, 工学研究科

From Apr. 2019, To Mar. 2020
Mathematics for Computation
Spring, 工学部

From Apr. 2020, To Mar. 2021
Mechanical and System Engineering Laboratory 2
Spring, 工学部

From Apr. 2020, To Mar. 2021
Mechanical and System Engineering Laboratory 2
Fall, 工学部

From Apr. 2020, To Mar. 2021
Exercise for Machine Shop Practice
Fall, 工学部

From Apr. 2020, To Mar. 2021
Exercise of Machine Design 2
Fall, 工学部

From Apr. 2020, To Mar. 2021
Precision Machining
Spring, 工学部

From Apr. 2020, To Mar. 2021
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,B
Fall, 工学研究科

From Apr. 2020, To Mar. 2021
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,D
Fall, 工学研究科

From Apr. 2020, To Mar. 2021
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,F
Fall, 工学研究科

From Apr. 2020, To Mar. 2021
Basic Seminar of Complex Mechanical Engineering,2
Fall, 工学研究科

From Apr. 2020, To Mar. 2021
Mathematics for Computation
Spring, 工学部

From Apr. 2021, To Mar. 2022
Mechanical and System Engineering Laboratory 2
Spring, 工学部

From Apr. 2021, To Mar. 2022
Mechanical and System Engineering Laboratory 2
Fall, 工学部

From Apr. 2021, To Mar. 2022
Exercise for Machine Shop Practice
Fall, 工学部

From Apr. 2021, To Mar. 2022
Exercise of Machine Design 2
Fall, 工学部

From Apr. 2021, To Mar. 2022
Precision Machining
Spring, 工学部

From Apr. 2021, To Mar. 2022
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,B
Fall, 工学研究科

From Apr. 2021, To Mar. 2022
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,D
Fall, 工学研究科

From Apr. 2021, To Mar. 2022
Seminar of Complex Mechanical Engineering for the 21st Century COE Program,F
Fall, 工学研究科

From Apr. 2021, To Mar. 2022
Basic Seminar of Complex Mechanical Engineering,2
Fall, 工学研究科

From Apr. 2021, To Mar. 2022
Mathematics for Computation
Spring, 工学部

Last Updated :2026/01/02

Administration

Faculty management (title, position)

From 01 Apr. 2013, To 31 Mar. 2015
桂事業場環境安全衛生委員会　委員

From 01 Apr. 2015, To 31 Mar. 2017
桂事業場環境安全衛生委員会　委員

ページ上部へ戻る